Show us your 2021 crf450

Meister
Profile picture for user Meister
Posts
3328
Joined
3/21/2013
Location
Canton, OH, USA
Meister 3/2/2021 7:10pm
3/2/2021 7:10pm
If any of you WE guys will be at or around Daytona this weekend, TDR Motorsports will be there as well. He will have his software on hand and could load your tune right then and there for you!
1
D_Mash336
Profile picture for user D_Mash336
Posts
132
Joined
5/16/2018
Location
USA
D_Mash336 3/4/2021 4:09pm
3/4/2021 4:09pm
Anyone install acerbis plastics yet? If so did you notice the difference in the exhaust side number plate?

Stock had rubber cushions and a minor heat sheild. Acerbis has nothing.

And if you have ran the acerbis, did you notice it rubbing the pipe badly?
hubbardmx50
Profile picture for user hubbardmx50
Posts
2832
Joined
11/17/2016
Location
Rancho Cucamonga, CA, USA
hubbardmx50 3/4/2021 4:36pm
3/4/2021 4:36pm Edited Date/Time 3/4/2021 4:37pm
D_Mash336 wrote:
Anyone install acerbis plastics yet? If so did you notice the difference in the exhaust side number plate? Stock had rubber cushions and a minor heat...
Anyone install acerbis plastics yet? If so did you notice the difference in the exhaust side number plate?

Stock had rubber cushions and a minor heat sheild. Acerbis has nothing.

And if you have ran the acerbis, did you notice it rubbing the pipe badly?
The last Acerbis rear number plate I used came with the heat shield stickers and the rubber cushions on the side to install. Was for the 17-20 bike not the 21
Meister
Profile picture for user Meister
Posts
3328
Joined
3/21/2013
Location
Canton, OH, USA
Meister 3/4/2021 5:35pm
3/4/2021 5:35pm
I used acerbis. I put the stock rubbers in the acerbis side panels and mine had the heat tape if I recall correctly.

The Shop

See All »
RCMXracing
Profile picture for user RCMXracing
Posts
891
Joined
8/10/2011
Location
N., TX, USA
RCMXracing 3/4/2021 7:42pm
3/4/2021 7:42pm
D_Mash336 wrote:
Anyone install acerbis plastics yet? If so did you notice the difference in the exhaust side number plate? Stock had rubber cushions and a minor heat...
Anyone install acerbis plastics yet? If so did you notice the difference in the exhaust side number plate?

Stock had rubber cushions and a minor heat sheild. Acerbis has nothing.

And if you have ran the acerbis, did you notice it rubbing the pipe badly?
Ended up pulling off old stock lower black parts and installing on Acerbis. Bogus they don’t include the cushions and wire shield/cushion. Would like to know if Polisport does.
D_Mash336
Profile picture for user D_Mash336
Posts
132
Joined
5/16/2018
Location
USA
D_Mash336 3/8/2021 11:57am
3/8/2021 11:57am
D_Mash336 wrote:
Anyone install acerbis plastics yet? If so did you notice the difference in the exhaust side number plate? Stock had rubber cushions and a minor heat...
Anyone install acerbis plastics yet? If so did you notice the difference in the exhaust side number plate?

Stock had rubber cushions and a minor heat sheild. Acerbis has nothing.

And if you have ran the acerbis, did you notice it rubbing the pipe badly?
RCMXracing wrote:
Ended up pulling off old stock lower black parts and installing on Acerbis. Bogus they don’t include the cushions and wire shield/cushion. Would like to know...
Ended up pulling off old stock lower black parts and installing on Acerbis. Bogus they don’t include the cushions and wire shield/cushion. Would like to know if Polisport does.
Did some reaching out to Acerbis. They were just made aware that their plastics weren't coming with everything needed for appropriate installation. They stated that the manufacturer in Italy wasn't sending everything. They are working on a fix for it now. Email their contact line from their website and they will get you on a list to receive the rest of the stuff once they have a solution.
2
D_Mash336
Profile picture for user D_Mash336
Posts
132
Joined
5/16/2018
Location
USA
D_Mash336 3/8/2021 11:57am
3/8/2021 11:57am
Cycra says April or May they will be releasing their full plastic kit.

Also little side note, if you order from Throttle Jockey, their website says 5-6 processing. It's more like 3 weeks of processing at this point. I would avoid them.
Rg43mx
Profile picture for user Rg43mx
Posts
28
Joined
12/3/2020
Location
Reading, PA, USA
Rg43mx 3/8/2021 1:28pm
3/8/2021 1:28pm
Just got my ecu back from Tokyo mods. Weather is finally warming up ready to see how improved the motor feels down low. Little guy is ready to ride, can’t wait to take him around on his stacyc.


5
plano67
Profile picture for user plano67
Posts
206
Joined
11/15/2019
Location
Simi Valley, CA, USA
plano67 3/8/2021 9:56pm
3/8/2021 9:56pm


8
Yeti831
Profile picture for user Yeti831
Posts
1348
Joined
1/30/2020
Location
USA
Yeti831 3/8/2021 10:07pm
3/8/2021 10:07pm
plano67 wrote:
[img]https://p.vitalmx.com/photos/forums/2021/03/08/482159/s1200_BB798148_28A2_42B4_B54A_A28D2D295C17.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2021/03/08/482160/s1200_3E1F6FAD_6DDB_4803_AF4D_EB4DDBF65C86.jpg[/img]


Dude, what bar bend is that?

Looks roomy.
afk66
Profile picture for user afk66
Posts
218
Joined
7/28/2018
Location
Mechanicsville, MD, USA
afk66 3/9/2021 5:14am
3/9/2021 5:14am
Not a huge fan of these MX33's, at least not the front. Still also getting the suspension dialed in. I switched to an XPR mapped Vortex - there connection maps are really good so far. The aggressive map makes a ton of power as well.



10
afk66
Profile picture for user afk66
Posts
218
Joined
7/28/2018
Location
Mechanicsville, MD, USA
afk66 3/9/2021 4:33pm
3/9/2021 4:33pm

4
plano67
Profile picture for user plano67
Posts
206
Joined
11/15/2019
Location
Simi Valley, CA, USA
plano67 3/9/2021 4:44pm
3/9/2021 4:44pm
plano67 wrote:
[img]https://p.vitalmx.com/photos/forums/2021/03/08/482159/s1200_BB798148_28A2_42B4_B54A_A28D2D295C17.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2021/03/08/482160/s1200_3E1F6FAD_6DDB_4803_AF4D_EB4DDBF65C86.jpg[/img]


Yeti831 wrote:
Dude, what bar bend is that?

Looks roomy.
997 bend
Meister
Profile picture for user Meister
Posts
3328
Joined
3/21/2013
Location
Canton, OH, USA
Meister 3/9/2021 5:08pm
3/9/2021 5:08pm
I don't mind the 33s. However, the 120 had to go down the road. I hate 120s because they make every bike harder to lay over in turns.
1
SeaClassExpert 3/9/2021 5:15pm
3/9/2021 5:15pm Edited Date/Time 3/9/2021 5:26pm
afk66 wrote:
Not a huge fan of these MX33's, at least not the front. Still also getting the suspension dialed in. I switched to an XPR mapped Vortex...
Not a huge fan of these MX33's, at least not the front. Still also getting the suspension dialed in. I switched to an XPR mapped Vortex - there connection maps are really good so far. The aggressive map makes a ton of power as well.



Just finished watching keef's review, he recommends switching to the MX3S in the front at the very least.

EDIT: Keef posted the video 2 weeks but I can't find that tire available ANYWHERE
MX915
Profile picture for user MX915
Posts
467
Joined
1/17/2018
Location
Central, NJ, USA
MX915 3/9/2021 5:52pm
3/9/2021 5:52pm
SeaClassExpert wrote:
Just finished watching keef's review, he recommends switching to the MX3S in the front at the very least. EDIT: Keef posted the video 2 weeks but...
Just finished watching keef's review, he recommends switching to the MX3S in the front at the very least.

EDIT: Keef posted the video 2 weeks but I can't find that tire available ANYWHERE
Chaparral apparently has 10+ fronts, at least according to their website.
1
rjs3118
Profile picture for user rjs3118
Posts
88
Joined
8/19/2020
Location
WNY, NY, USA
rjs3118 3/10/2021 1:06pm
3/10/2021 1:06pm
Meister wrote:
All I know is the rear shock shaft is larger and coated. If you haven't ever done springs on your own, it's easy even if you're...
All I know is the rear shock shaft is larger and coated. If you haven't ever done springs on your own, it's easy even if you're only a little mechanically inclined. The vital video made it easy. Just gotta spend a few bucks on proper tools.
Do happen to have a link to the video? Is it for forks and shock? Thanks!!

Pit Row

See All »
thrillbillie91 3/10/2021 1:11pm
3/10/2021 1:11pm
afk66 wrote:
Not a huge fan of these MX33's, at least not the front. Still also getting the suspension dialed in. I switched to an XPR mapped Vortex...
Not a huge fan of these MX33's, at least not the front. Still also getting the suspension dialed in. I switched to an XPR mapped Vortex - there connection maps are really good so far. The aggressive map makes a ton of power as well.



Liking the graphic choice mate!
1
afk66
Profile picture for user afk66
Posts
218
Joined
7/28/2018
Location
Mechanicsville, MD, USA
afk66 3/10/2021 2:46pm
3/10/2021 2:46pm
afk66 wrote:
Not a huge fan of these MX33's, at least not the front. Still also getting the suspension dialed in. I switched to an XPR mapped Vortex...
Not a huge fan of these MX33's, at least not the front. Still also getting the suspension dialed in. I switched to an XPR mapped Vortex - there connection maps are really good so far. The aggressive map makes a ton of power as well.



thrillbillie91 wrote:
Liking the graphic choice mate!
Thank you! I really like how it turned out.
1
mxav8r
Profile picture for user mxav8r
Posts
605
Joined
10/26/2006
Location
Atl, GA, USA
mxav8r 3/10/2021 6:14pm
3/10/2021 6:14pm
afk66 wrote:
Thank you! I really like how it turned out.
afk66 beautiful bike! Love the graphics 👍
1
Meister
Profile picture for user Meister
Posts
3328
Joined
3/21/2013
Location
Canton, OH, USA
Meister 3/10/2021 6:40pm
3/10/2021 6:40pm
Snagged a couple cool ones at Daytona over the weekend
5
Meister
Profile picture for user Meister
Posts
3328
Joined
3/21/2013
Location
Canton, OH, USA
Meister 3/10/2021 6:42pm
3/10/2021 6:42pm
I have no idea how to properly use a camera, but I tried lol


5
mxrider118 3/11/2021 11:17am
3/11/2021 11:17am
afk66 wrote:
[img]https://p.vitalmx.com/photos/forums/2021/03/09/482281/s1200_0ACEC6AC_22C2_4159_8452_0FD1DAD37E85.jpg[/img]

where did you get those wheels ?
mxrider118 3/11/2021 11:22am
3/11/2021 11:22am
Meister wrote:
I have no idea how to properly use a camera, but I tried lol [img]https://p.vitalmx.com/photos/forums/2021/03/10/482420/s1200_PXL_20210310_224035071.jpg[/img]
I have no idea how to properly use a camera, but I tried lol


Hey bud, couple questions, how was the bike on pump gas with your tune, any flame out or low end burble. What map are you using 1.2 or 3. Did you remove muffler insert?

Just got my TDR mapped ECU just waiting on snow to melt.
Meister
Profile picture for user Meister
Posts
3328
Joined
3/21/2013
Location
Canton, OH, USA
Meister 3/11/2021 12:38pm
3/11/2021 12:38pm
No flame out, pump gas worked just fine as far as I could tell. No bog or stutter at all. I've been using map 3 as I like the hit it has low and pulls to the moon. My muffler insert is still in. May try pulling it out when I'm at a track.
fourfourone
Profile picture for user fourfourone
Posts
3046
Joined
10/14/2017
Location
86oh, CT, USA
fourfourone 3/11/2021 1:01pm
3/11/2021 1:01pm
afk66 wrote:
Not a huge fan of these MX33's, at least not the front. Still also getting the suspension dialed in. I switched to an XPR mapped Vortex...
Not a huge fan of these MX33's, at least not the front. Still also getting the suspension dialed in. I switched to an XPR mapped Vortex - there connection maps are really good so far. The aggressive map makes a ton of power as well.



that bike looks awesome
1
mxrider118 3/11/2021 1:20pm
3/11/2021 1:20pm
Meister wrote:
No flame out, pump gas worked just fine as far as I could tell. No bog or stutter at all. I've been using map 3 as...
No flame out, pump gas worked just fine as far as I could tell. No bog or stutter at all. I've been using map 3 as I like the hit it has low and pulls to the moon. My muffler insert is still in. May try pulling it out when I'm at a track.
thanks man
afk66
Profile picture for user afk66
Posts
218
Joined
7/28/2018
Location
Mechanicsville, MD, USA
afk66 3/12/2021 3:37am
3/12/2021 3:37am
afk66 wrote:
[img]https://p.vitalmx.com/photos/forums/2021/03/09/482281/s1200_0ACEC6AC_22C2_4159_8452_0FD1DAD37E85.jpg[/img]

mxrider118 wrote:
where did you get those wheels ?
Wheels I built. Excel takasago rims, excel spokes and tusk hubs. It was a backup wheelset to my previous bike. I wanted to try some Hoosiers as I’ve heard good things about them.
Meister
Profile picture for user Meister
Posts
3328
Joined
3/21/2013
Location
Canton, OH, USA
Meister 3/12/2021 4:24am
3/12/2021 4:24am
Thinking of an extra wheel set too.. were you able to use previous years?

Post a reply to: Show us your 2021 crf450