1992 YZ250 back to life

Micahdogg
Posts
1263
Joined
1/3/2011
Location
USA
2/3/2016 1:56pm
If yours is polished, yes a scotchbrite and wd40 will fix it up. I didn't use anything abrasive so there are no scratches. Just the cool OEM stamped patina. The cost was low, the labor was high!

Ronhjr
Posts
5
Joined
3/24/2016
Location
Wasilla, AK, USA
3/26/2016 9:22am
Looks good, I just finished a 1990 yz 125. glow in the dark.

MaxPower
Posts
2703
Joined
8/15/2006
Location
USA
4/16/2016 4:49pm
Ronhjr wrote:
Looks good, I just finished a 1990 yz 125.[img]https://p.vitalmx.com/photos/forums/2016/03/26/129475/s1200_image.jpg[/img] glow in the dark.
Looks good, I just finished a 1990 yz 125. glow in the dark.

You need Mullisha graphics and holes cut in the airbox to grab the seat better when busting tricks
A number 420 on the plates could only help. You're welcome
1
Micahdogg
Posts
1263
Joined
1/3/2011
Location
USA
5/6/2016 7:47am
Guess it's been about 3 months since I had an update. I got busy at work and didn't have time to do anything else. Anyway, today I installed the graphics and realized I could probably fire it up, so I did. No drama and no surprises. Jetting was completely ballpark on this first fire which is why the idle is high, but I runs acceptable. Nice low end, needs cleaned up in the mid range, but comes up on the pipe, so just some pilot or clip adjustments and she's probably good to go. Feels great! I didn't expect to like this bike, but it feels better than I thought it would. Sorry for the shabby video, but it was last minute idea.

3

The Shop

sandman768
Posts
8311
Joined
3/21/2014
Location
Saratoga Springs, NY, USA
5/6/2016 10:42am
Great work! Normally I don"t like the plated pipes, but it looks good on the magenta YZ!
RyanLester761
Posts
1128
Joined
2/7/2007
Location
El Dorado Hills, CA, USA
5/6/2016 12:43pm
That "magenta" sure brings back memories. Beautiful bike! Are those original graphics and seat cover or remakes?
Mixon848
Posts
335
Joined
1/27/2011
Location
Oakley, CA, USA
5/7/2016 6:35am
Very nice.
Micahdogg
Posts
1263
Joined
1/3/2011
Location
USA
5/11/2016 9:16am
Thanks. The cover and graphics are remakes from evo. I had the deltabox stickers too, but seem to have tossed them at some point! I rolled it back out for some better pics and shot another vid.

1
sands-cr250
Posts
111
Joined
3/24/2016
Location
Edwardsville, IL, USA
5/19/2016 12:52pm
Very cool, I feel ya with all the sanding. I'm currently working on a 92 CR250 at the moment, my problem is I keep putting everything back together so I can ride it!

I've taken the tank off three different times now, probably 8 hours or so of sanding. I'm scared you said 40 hours of sanding! Also agree, the polish and buffing doesn't do much, it's all about the sanding through the grits and in the really bad places a razor blade helps.

I have noticed, not sure if you guys have--the old parts ie number plates and radiator shrouds that I have sanded and buffed stain really bad compared to my new fenders. A clean rag with some WD40 is about the only thing that seems to take the mud stains and such out.

-ss
Micahdogg
Posts
1263
Joined
1/3/2011
Location
USA
5/19/2016 12:58pm
Its like anything, the more you do it, the better you get. I could do that tank now in probably half the time knowing what works and what I was wasting my time with. The only part of the sanding that I haven't solved yet is when the scratches get so fine - like 1000 grit, if you wet sand it makes it hard to see what you are doing. SO I usually have to dry sand from that point onward. Gets real tedious.
Micahdogg
Posts
1263
Joined
1/3/2011
Location
USA
3/8/2018 4:19pm
Nothing like photobucket bombing out a perfectly good build thread, but I moved all my pictures over to imgur so now this thread is alive again!
1
Glen
Posts
276
Joined
11/26/2010
Location
Rockaway, NJ, USA
3/9/2018 7:03pm
awesome build!
quiknic
Posts
845
Joined
11/30/2008
Location
Santa Clarita, CA, USA
3/9/2018 9:54pm
Sweet sweet ride, I'm impressed!
Xlogan22x
Posts
1
Joined
5/28/2020
Location
Painesville, OH, USA
5/28/2020 11:12am
Hey i have recently got a 1992 yz250. My gold series fatty pipe looks the exact same as the one you have. Mine is rusted out and i would like to get a new one. All of them online seem to be different than the one i have.
5/29/2020 7:21am
Micahdogg wrote:
Guess it's been about 3 months since I had an update. I got busy at work and didn't have time to do anything else. Anyway, today...
Guess it's been about 3 months since I had an update. I got busy at work and didn't have time to do anything else. Anyway, today I installed the graphics and realized I could probably fire it up, so I did. No drama and no surprises. Jetting was completely ballpark on this first fire which is why the idle is high, but I runs acceptable. Nice low end, needs cleaned up in the mid range, but comes up on the pipe, so just some pilot or clip adjustments and she's probably good to go. Feels great! I didn't expect to like this bike, but it feels better than I thought it would. Sorry for the shabby video, but it was last minute idea.

Looks and sounds great! Great work!
neverwas
Posts
2796
Joined
8/17/2006
Location
Tucson, AZ, USA
5/29/2020 1:37pm
Very impressive,Nice build. The pictures of it on the lawn,screams new tire and a a few practice starts,braaap!
TooOld4WFO
Posts
673
Joined
4/1/2018
Location
Fresno, CA, USA
7/23/2020 1:13pm
An absolutely incredible restore.
As clean as any.
Few can appreciate all that time you put in on it. I was amazed at your plastic restore. Surprisingly you did the fenders too as UFO offers replica plastic I understand.
Great job and thank you for sharing your efforts.
NoMuff2Tuff
Posts
191
Joined
2/11/2015
Location
La Place, LA, USA
7/24/2020 4:01am
Hell of job, that is one great looking YZ. I agree the plated pipe looks sweet on your bike. The plastic came out awesome. I re did a old RM tank and it took a lot of time and effort to bring it back to life and you did all the plastic. Can't say enough about this build, great job!!

Post a reply to: 1992 YZ250 back to life

The Latest