5 Photos: Tool Box Edition

lostboy819 4/1/2020 1:38pm
4/1/2020 1:38pm
The New Ryobi one boat. Wink Tongue


2
imoto34
Profile picture for user imoto34
Posts
3781
Joined
1/28/2010
Location
USA
imoto34 4/1/2020 3:00pm
4/1/2020 3:00pm
CivBars wrote:
My next tool purchase is going to be a better torque wrench. The one That I have now is pretty old and has been borrowed and...
My next tool purchase is going to be a better torque wrench. The one That I have now is pretty old and has been borrowed and probably isn't as accurate as I'd like? Better safe than sorry I suppose. What's a good all around torque wrench for moto? Is it worth it to invest in 2 different sizes or will a good 1/2in cover the lower #?
I rarely use my 1/2. Precision instruments make great torque wrenches.
GregDVT
Profile picture for user GregDVT
Posts
705
Joined
3/23/2016
Location
Phoenix, MD, USA
GregDVT 4/1/2020 3:15pm
4/1/2020 3:15pm
Here is my setup in my shed. This is for Moto and feral house maintenance. I have all the necessities to do general Maintenance and some chassis work, after that I’m more comfortable having someone else do the work. When I’m going to the track I bring the red tool box, fluids, and the fender bench.


Now if you are into vintage tools I.e. 1900-1940 I’ve got some cool stuff that I inherited from my great uncle.


2
ehr400
Profile picture for user ehr400
Posts
2630
Joined
4/1/2008
Location
Britton, MI, USA
ehr400 4/1/2020 3:21pm
4/1/2020 3:21pm
Some of my boxes I use in my barn and my favorite table.












4

The Shop

See All »
sumdood
Profile picture for user sumdood
Posts
8968
Joined
3/11/2013
Location
San Clemente, CA, USA
Fantasy
592nd
sumdood 4/1/2020 5:22pm
4/1/2020 5:22pm
GregDVT wrote:
Here is my setup in my shed. This is for Moto and feral house maintenance. I have all the necessities to do general Maintenance and some...
Here is my setup in my shed. This is for Moto and feral house maintenance. I have all the necessities to do general Maintenance and some chassis work, after that I’m more comfortable having someone else do the work. When I’m going to the track I bring the red tool box, fluids, and the fender bench.


Now if you are into vintage tools I.e. 1900-1940 I’ve got some cool stuff that I inherited from my great uncle.


Let’s see the vintage stuff. I’ve got some older stuff, I have 2 vintage underwater cordless drills, some old block planes and a wind chime my Dad made with his Dads “old” tools.





2
newmann
Profile picture for user newmann
Posts
24438
Joined
4/1/2008
Location
USA
newmann 4/1/2020 5:37pm
4/1/2020 5:37pm
CivBars wrote:
My next tool purchase is going to be a better torque wrench. The one That I have now is pretty old and has been borrowed and...
My next tool purchase is going to be a better torque wrench. The one That I have now is pretty old and has been borrowed and probably isn't as accurate as I'd like? Better safe than sorry I suppose. What's a good all around torque wrench for moto? Is it worth it to invest in 2 different sizes or will a good 1/2in cover the lower #?
A 1/2 inch isn’t going to work down in the lower range for a lot of the small bolts on a dirt bike. I got this 3/8 0-25 lb ft from Snap On. Good stuff.

Unless you use one a whole lot I would avoid the digital ones


1
GregDVT
Profile picture for user GregDVT
Posts
705
Joined
3/23/2016
Location
Phoenix, MD, USA
GregDVT 4/2/2020 2:54pm
4/2/2020 2:54pm
GregDVT wrote:
Here is my setup in my shed. This is for Moto and feral house maintenance. I have all the necessities to do general Maintenance and some...
Here is my setup in my shed. This is for Moto and feral house maintenance. I have all the necessities to do general Maintenance and some chassis work, after that I’m more comfortable having someone else do the work. When I’m going to the track I bring the red tool box, fluids, and the fender bench.


Now if you are into vintage tools I.e. 1900-1940 I’ve got some cool stuff that I inherited from my great uncle.


sumdood wrote:
Let’s see the vintage stuff. I’ve got some older stuff, I have 2 vintage underwater cordless drills, some old block planes and a wind chime my...
Let’s see the vintage stuff. I’ve got some older stuff, I have 2 vintage underwater cordless drills, some old block planes and a wind chime my Dad made with his Dads “old” tools.





Here are my favorite vintage tools that were easily accessible, I have some older stuff buried away and some awesome vintage surf and fly gear. I might start a non moto thread later. The home made t handle (from great uncle) and the Mitchell 300 (my dads chiLdhood reel) Are probably my two favorite items. The socket set isn’t that old but my uncle hand made the box







2
sumdood
Profile picture for user sumdood
Posts
8968
Joined
3/11/2013
Location
San Clemente, CA, USA
Fantasy
592nd
sumdood 4/2/2020 4:25pm
4/2/2020 4:25pm Edited Date/Time 4/2/2020 5:34pm
GregDVT I wonder who’s Dremel is older ? 😂 Yours has a cool wooden box.
GregDVT
Profile picture for user GregDVT
Posts
705
Joined
3/23/2016
Location
Phoenix, MD, USA
GregDVT 4/2/2020 5:16pm
4/2/2020 5:16pm
sumdood wrote:
GregDVT I wonder who’s Dremel is older ? 😂 Yours has a cool wooden box. [img]https://p.vitalmx.com/photos/forums/2020/04/02/416163/s1200_AE37C65E_F594_42EB_A031_6350E5B2E4C7.jpg[/img]
GregDVT I wonder who’s Dremel is older ? 😂 Yours has a cool wooden box.
Now that is bad ass. It looks like a crazy dentists tool!
newmann
Profile picture for user newmann
Posts
24438
Joined
4/1/2008
Location
USA
newmann 4/2/2020 6:37pm
4/2/2020 6:37pm
GregDVT with the Bonney ratchets and Plumb hatchet! I would give that Plumb some TLC if you want to part with it...just sayin’

Cleaned this old one up and put a new handle on it. That in itself takes some attention to detail to get a good fit and no slop. Every one I do I get a little bit better. I always keep my eyes peeled for old name brand US made tools.



SEEMEFIRST
Profile picture for user SEEMEFIRST
Posts
13937
Joined
8/21/2006
Location
Arlington, TX, USA
SEEMEFIRST 4/2/2020 7:42pm
4/2/2020 7:42pm
GregDVT wrote:
Here is my setup in my shed. This is for Moto and feral house maintenance. I have all the necessities to do general Maintenance and some...
Here is my setup in my shed. This is for Moto and feral house maintenance. I have all the necessities to do general Maintenance and some chassis work, after that I’m more comfortable having someone else do the work. When I’m going to the track I bring the red tool box, fluids, and the fender bench.


Now if you are into vintage tools I.e. 1900-1940 I’ve got some cool stuff that I inherited from my great uncle.


sumdood wrote:
Let’s see the vintage stuff. I’ve got some older stuff, I have 2 vintage underwater cordless drills, some old block planes and a wind chime my...
Let’s see the vintage stuff. I’ve got some older stuff, I have 2 vintage underwater cordless drills, some old block planes and a wind chime my Dad made with his Dads “old” tools.





Bit and brace?
Imagine doing stuff with that?

When I was "aircrafting" ÷ or - might be .010". Might be .005"? Less?

Well, they were less than mach back then.
CMcBain
Profile picture for user CMcBain
Posts
53
Joined
9/12/2016
Location
CA
CMcBain 4/2/2020 8:28pm
4/2/2020 8:28pm
My box isn’t very ocd. I would love to get organized with inserts but all my stuff is mismatched anyways. My favourites are the old snap on ratchets ones a 1940s 3/8 “Ferret” with no chrome as apparently they needed it for the war effort. The other one is a “Midget” which is cool but it’s a 9/32 drive so even with an adaptor to fit 1/4 sockets I never use it. I can’t stop buying old quality tools so now I have like 20 ratchets and use like 3! The last pic is of a couple Herbrand 1/2 ratchets which are really cool and different.






3
sumdood
Profile picture for user sumdood
Posts
8968
Joined
3/11/2013
Location
San Clemente, CA, USA
Fantasy
592nd
sumdood 4/2/2020 10:06pm
4/2/2020 10:06pm
SEEMEFIRST wrote:
Bit and brace? Imagine doing stuff with that? When I was "aircrafting" ÷ or - might be .010". Might be .005"? Less? Well, they were less...
Bit and brace?
Imagine doing stuff with that?

When I was "aircrafting" ÷ or - might be .010". Might be .005"? Less?

Well, they were less than mach back then.
I can imagine doing stuff with that actually, I used the one in the top pic 2 times last year. I wasn't kidding when I said underwater cordless Laughing
YZ302
Profile picture for user YZ302
Posts
160
Joined
10/14/2013
Location
Southwick, MA, USA
YZ302 4/3/2020 4:28am
4/3/2020 4:28am
This is my set up. My boxes are older than motocross.LOL.





4
newmann
Profile picture for user newmann
Posts
24438
Joined
4/1/2008
Location
USA
newmann 4/3/2020 5:45am
4/3/2020 5:45am
YZ302 wrote:
This is my set up. My boxes are older than motocross.LOL.[img]https://p.vitalmx.com/photos/forums/2020/04/03/416258/s1200_23A07D2A_EE1A_41FC_AA30_2B928539BE6B.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2020/04/03/416257/s1200_E0C4DDDA_0C0E_44A5_8A33_CDAFDCB83A92.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2020/04/03/416260/s1200_279A53BA_C595_437A_84DB_F935CB05A9D6.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2020/04/03/416261/s1200_0519B98F_F213_48BF_851D_5AF56EA6A1B3.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2020/04/03/416259/s1200_B883397C_6952_4293_9368_C4FE1D9D61B2.jpg[/img]
This is my set up. My boxes are older than motocross.LOL.





Hmmmmm.... Do want. Surely you don't need both of those top boxes??
basslips
Profile picture for user basslips
Posts
194
Joined
6/21/2017
Location
Bellfountain, OR, USA
basslips 4/3/2020 8:37am
4/3/2020 8:37am Edited Date/Time 4/3/2020 8:41am
Here is my box I built I to a bench a couple of years ago.







5
sumdood
Profile picture for user sumdood
Posts
8968
Joined
3/11/2013
Location
San Clemente, CA, USA
Fantasy
592nd
sumdood 4/3/2020 9:18am
4/3/2020 9:18am
sumdood wrote:
GregDVT I wonder who’s Dremel is older ? 😂 Yours has a cool wooden box. [img]https://p.vitalmx.com/photos/forums/2020/04/02/416163/s1200_AE37C65E_F594_42EB_A031_6350E5B2E4C7.jpg[/img]
GregDVT I wonder who’s Dremel is older ? 😂 Yours has a cool wooden box.
GregDVT wrote:
Now that is bad ass. It looks like a crazy dentists tool!
I used it once and then bought a new one Laughing It's all metal, has a sketchy looking cord, does about ninety thousand rpm and you can see blue sparks through the vent holes. Yeah....... I'm out lol
1
sargebro689
Profile picture for user sargebro689
Posts
36
Joined
9/17/2015
Location
Kalama, WA, USA
sargebro689 4/4/2020 8:31am
4/4/2020 8:31am
Not a toolbox, but my 'moto' area under the 30x12 loft I just finished in my pole barn. Also have a transmission/fork/shock rebuild station that's almost finished.


2

Pit Row

See All »
yak651
Profile picture for user yak651
Posts
8786
Joined
8/26/2006
Location
Appleton, WI, USA
Fantasy
1358th
yak651 4/4/2020 8:40am
4/4/2020 8:40am
If anyone knows where I can get magnetic socket holder like this, bought this probably 15 years ago at Sears, but didn’t get all sizes, now can’t find them....hate the clippey ones
1
Pink
Profile picture for user Pink
Posts
161
Joined
1/31/2020
Location
Greenville, SC, USA
Pink 4/4/2020 2:18pm
4/4/2020 2:18pm
lostboy819 wrote:
I started buying Roybi one cordless tools for jobs around the houses and home improvement type work and Home Depot has so many buy one tool...
I started buying Roybi one cordless tools for jobs around the houses and home improvement type work and Home Depot has so many buy one tool get one free and sales that they are easy and less expensive to acquire than Dealt or Milwaukee and do the job no problem. I had my $200 Dewalt drill fall off my ladder and hit the concrete and break the housing and they said I was out of luck and you will have to buy a new one, did the same with the $125 Ryobi and I called to see if I could buy the trigger housing and they sent me a whole new drill and told me to keep the broken one, I register everything I buy on the Ryobi and they are good about customer service.

I take pics of all my tools with list of model numbers for my insurance because if the insurance company thinks you use you tools to make a living then home owners may not cover them so I buy a separate policy that cover just my tools from air compressors to mig and tig welders bead plaster, etc etc. And I bring home something new at least once a week and my wife bans me from Home depot from time to time.


































The Ryobi plant is here in town. About twice a year they open up and sell factory direct. It’s sooooo cheap, you could buy everything you have for $400. They will give you boxes of batteries for free. I hate I’m not a fan of there tools!
Ake89
Profile picture for user Ake89
Posts
141
Joined
12/17/2015
Location
Argyle, TX, USA
Ake89 4/4/2020 2:52pm
4/4/2020 2:52pm Edited Date/Time 4/4/2020 4:53pm
My track box
1
Ake89
Profile picture for user Ake89
Posts
141
Joined
12/17/2015
Location
Argyle, TX, USA
Ake89 4/4/2020 4:51pm
4/4/2020 4:51pm





1
Dannyderasmo106 4/7/2020 12:19pm
4/7/2020 12:19pm
having a nice organized tool box makes working on anything soo much simpler.





1
Timo_2824
Profile picture for user Timo_2824
Posts
553
Joined
12/19/2016
Location
Wichita, KS, USA
Timo_2824 4/16/2020 8:24am
4/16/2020 8:24am
I'm late to the party, but been working out of town for the last 3 weeks.










1
wwdiii
Profile picture for user wwdiii
Posts
2579
Joined
4/15/2019
Location
League City, TX, USA
wwdiii 4/16/2020 9:00am
4/16/2020 9:00am
Its is no doubt I am not as organized as most and sure as hell don't have as many hammers are some of you guys.

I can say this, I am not OCD!!!
Bret
Profile picture for user Bret
Posts
831
Joined
8/10/2008
Location
Mission Viejo, CA, USA
Bret 4/16/2020 2:56pm
4/16/2020 2:56pm
My oldest and least tidy.






newmann
Profile picture for user newmann
Posts
24438
Joined
4/1/2008
Location
USA
newmann 4/16/2020 4:00pm
4/16/2020 4:00pm
Stillwelding....all those clamps...hnnnnngggggg!! Love it
1
charlie68
Profile picture for user charlie68
Posts
161
Joined
6/28/2019
Location
North Windham, CT, USA
charlie68 4/17/2020 10:37am
4/17/2020 10:37am
yak651 wrote:
If anyone knows where I can get magnetic socket holder like this, bought this probably 15 years ago at Sears, but didn’t get all sizes, now...
If anyone knows where I can get magnetic socket holder like this, bought this probably 15 years ago at Sears, but didn’t get all sizes, now can’t find them....hate the clippey ones
Google Mechanics timesaver socket rail.....

Post a reply to: 5 Photos: Tool Box Edition