TX RACE™ Restyle Kit® for KX finally launched !!

Mr. Afterbar
Profile picture for user Mr. Afterbar
Posts
2410
Joined
5/13/2019
Location
Green Bay, WI US
Mr. Afterbar 1/4/2020 7:47am
1/4/2020 7:47am
ledger wrote:
Thought I would give this thread a bump to see if anyone has installed the 16-18 450 plastics on the 05-07 KX250...? Lots of 03-04 Kx250s...
Thought I would give this thread a bump to see if anyone has installed the 16-18 450 plastics on the 05-07 KX250...? Lots of 03-04 Kx250s adopting the 250F plastics, and 03-05 Kx125's also, but slim pickings for the 05-07's with 450 plastics. Any info is appreciated.
kb228 wrote:
250 and 450 plastics are usually the same with kawi
They haven't been the same since '15.
1
ReturnofJorddo 1/4/2020 8:13am
1/4/2020 8:13am
ledger wrote:
Thought I would give this thread a bump to see if anyone has installed the 16-18 450 plastics on the 05-07 KX250...? Lots of 03-04 Kx250s...
Thought I would give this thread a bump to see if anyone has installed the 16-18 450 plastics on the 05-07 KX250...? Lots of 03-04 Kx250s adopting the 250F plastics, and 03-05 Kx125's also, but slim pickings for the 05-07's with 450 plastics. Any info is appreciated.
kb228 wrote:
250 and 450 plastics are usually the same with kawi
Mr. Afterbar wrote:
They haven't been the same since '15.
Kawi 250 and 450 plastics were the same 06-08 and 09-11 (except for colour of # plates). They haven't had the same plastics on both bikes since 2012.
2
ledger
Profile picture for user ledger
Posts
3669
Joined
1/17/2013
Location
TN US
ledger 1/4/2020 11:51am
1/4/2020 11:51am
ledger wrote:
Thought I would give this thread a bump to see if anyone has installed the 16-18 450 plastics on the 05-07 KX250...? Lots of 03-04 Kx250s...
Thought I would give this thread a bump to see if anyone has installed the 16-18 450 plastics on the 05-07 KX250...? Lots of 03-04 Kx250s adopting the 250F plastics, and 03-05 Kx125's also, but slim pickings for the 05-07's with 450 plastics. Any info is appreciated.
-MAVERICK- wrote:
[img]https://p.vitalmx.com/photos/forums/2020/01/04/396101/s1200_6632789455.jpg[/img]
That's the exact look I'm going for...minus the graphics. I would like to know the difference in frame's from 03-04 (as pictured above) vs 05-07 KX 250's. Thanks Mav.
ledger
Profile picture for user ledger
Posts
3669
Joined
1/17/2013
Location
TN US
ledger 1/4/2020 11:57am
1/4/2020 11:57am Edited Date/Time 1/4/2020 11:58am
kb228 wrote:
250 and 450 plastics are usually the same with kawi
Pretty much the same other than the upper shroud where it bolts to the tank. Very minor for sure.

The Shop

See All »
RiverockMX 1/4/2020 11:57am
1/4/2020 11:57am
ledger wrote:
That's the exact look I'm going for...minus the graphics. I would like to know the difference in frame's from 03-04 (as pictured above) vs 05-07 KX...
That's the exact look I'm going for...minus the graphics. I would like to know the difference in frame's from 03-04 (as pictured above) vs 05-07 KX 250's. Thanks Mav.
There is no difference in the frame from 03-07 except maybe the exhaust bracket that changed in 2004.
1
-MAVERICK-
Profile picture for user -MAVERICK-
Posts
65478
Joined
3/26/2015
Location
Ontario CA
-MAVERICK- 1/4/2020 12:03pm
1/4/2020 12:03pm
ledger wrote:
That's the exact look I'm going for...minus the graphics. I would like to know the difference in frame's from 03-04 (as pictured above) vs 05-07 KX...
That's the exact look I'm going for...minus the graphics. I would like to know the difference in frame's from 03-04 (as pictured above) vs 05-07 KX 250's. Thanks Mav.
Sorry, I couldn't tell you. I rode an '05 KX 125 once and I didn't like it. I found the rear end to be high. That's my extent of experience with Kawasaki.

I prefered my '04 YZ 125.

I was under impression the frames were the same just with a different swingarm. I took a quick look and they're indeed different.

I'll admit, the newer style bodywork on the KX looks good. Can't say the same for the CR's or RM's.
1
.kyle
Profile picture for user .kyle
Posts
469
Joined
6/5/2011
Location
GB
.kyle 1/4/2020 12:33pm
1/4/2020 12:33pm
ledger wrote:
That's the exact look I'm going for...minus the graphics. I would like to know the difference in frame's from 03-04 (as pictured above) vs 05-07 KX...
That's the exact look I'm going for...minus the graphics. I would like to know the difference in frame's from 03-04 (as pictured above) vs 05-07 KX 250's. Thanks Mav.
RiverockMX wrote:
There is no difference in the frame from 03-07 except maybe the exhaust bracket that changed in 2004.
The frame is different - as the 250 received an updated frame and engine in 2005. Plastic fitment should be the same, I would have thought. (I have a kx125 not a 250).
2
ledger
Profile picture for user ledger
Posts
3669
Joined
1/17/2013
Location
TN US
ledger 1/4/2020 12:36pm
1/4/2020 12:36pm
RiverockMX wrote:
There is no difference in the frame from 03-07 except maybe the exhaust bracket that changed in 2004.
That's what I figured, but wanted to make sure. The only difference that I see in the 03-04 is the lower frame area has four ribs...where the lower part of boots would rub...and the 05-07 is smooth. Thanks Riverock.
1
ledger
Profile picture for user ledger
Posts
3669
Joined
1/17/2013
Location
TN US
ledger 1/4/2020 12:52pm
1/4/2020 12:52pm Edited Date/Time 1/4/2020 12:56pm
.kyle wrote:
The frame is different - as the 250 received an updated frame and engine in 2005. Plastic fitment should be the same, I would have thought...
The frame is different - as the 250 received an updated frame and engine in 2005. Plastic fitment should be the same, I would have thought. (I have a kx125 not a 250).
Oh no, I'm back to square one again, lol. I've purchased the 16-18 tank, airbox, and... subframe that I purchased and waiting for from Vitalmx member vbm111 (great guy btw). I guess I'll be the test dummy...lol.
RiverockMX 1/4/2020 1:17pm
1/4/2020 1:17pm
ledger wrote:
Oh no, I'm back to square one again, lol. I've purchased the 16-18 tank, airbox, and... subframe that I purchased and waiting for from Vitalmx member...
Oh no, I'm back to square one again, lol. I've purchased the 16-18 tank, airbox, and... subframe that I purchased and waiting for from Vitalmx member vbm111 (great guy btw). I guess I'll be the test dummy...lol.
Don't worry.. for your purposes of restyling the minor changes in the chassis won't make any difference. 03-07 plastics are all interchangeable. I did a frame up KX250 build.
2
aFACEdismembered 1/4/2020 1:39pm
1/4/2020 1:39pm Edited Date/Time 1/4/2020 1:42pm
ledger wrote:
That's the exact look I'm going for...minus the graphics. I would like to know the difference in frame's from 03-04 (as pictured above) vs 05-07 KX...
That's the exact look I'm going for...minus the graphics. I would like to know the difference in frame's from 03-04 (as pictured above) vs 05-07 KX 250's. Thanks Mav.
RiverockMX wrote:
There is no difference in the frame from 03-07 except maybe the exhaust bracket that changed in 2004.
03-04 frame had ankle ridges on the frame. 05-07 is smooth. that's the first thing i look for to identify.

that and the water pump placement. they positioned it higher on the new motor for 05-07 to protect it better.
1
ledger
Profile picture for user ledger
Posts
3669
Joined
1/17/2013
Location
TN US
ledger 1/4/2020 4:37pm
1/4/2020 4:37pm
RiverockMX wrote:
Don't worry.. for your purposes of restyling the minor changes in the chassis won't make any difference. 03-07 plastics are all interchangeable. I did a frame...
Don't worry.. for your purposes of restyling the minor changes in the chassis won't make any difference. 03-07 plastics are all interchangeable. I did a frame up KX250 build.
Riverock, do you mind posting a few pic's ? I need all the help I can get,lol.
bvm111
Profile picture for user bvm111
Posts
10079
Joined
7/1/2008
Location
Las Vegas, NV US
bvm111 1/4/2020 4:57pm
1/4/2020 4:57pm
.kyle wrote:
The frame is different - as the 250 received an updated frame and engine in 2005. Plastic fitment should be the same, I would have thought...
The frame is different - as the 250 received an updated frame and engine in 2005. Plastic fitment should be the same, I would have thought. (I have a kx125 not a 250).
ledger wrote:
Oh no, I'm back to square one again, lol. I've purchased the 16-18 tank, airbox, and... subframe that I purchased and waiting for from Vitalmx member...
Oh no, I'm back to square one again, lol. I've purchased the 16-18 tank, airbox, and... subframe that I purchased and waiting for from Vitalmx member vbm111 (great guy btw). I guess I'll be the test dummy...lol.
I didn’t know that’s why you needed that subframe... good luck with the conversion!

I like mine the way they came from the factory, that damn thing wore me out today!!!

5
1
ledger
Profile picture for user ledger
Posts
3669
Joined
1/17/2013
Location
TN US
ledger 1/4/2020 5:47pm
1/4/2020 5:47pm Edited Date/Time 1/5/2020 6:32pm
.kyle wrote:
The frame is different - as the 250 received an updated frame and engine in 2005. Plastic fitment should be the same, I would have thought...
The frame is different - as the 250 received an updated frame and engine in 2005. Plastic fitment should be the same, I would have thought. (I have a kx125 not a 250).
ledger wrote:
Oh no, I'm back to square one again, lol. I've purchased the 16-18 tank, airbox, and... subframe that I purchased and waiting for from Vitalmx member...
Oh no, I'm back to square one again, lol. I've purchased the 16-18 tank, airbox, and... subframe that I purchased and waiting for from Vitalmx member vbm111 (great guy btw). I guess I'll be the test dummy...lol.
bvm111 wrote:
I didn’t know that’s why you needed that subframe... good luck with the conversion! I like mine the way they came from the factory, that damn...
I didn’t know that’s why you needed that subframe... good luck with the conversion!

I like mine the way they came from the factory, that damn thing wore me out today!!!

I know your bike is stock, other than a few item's, but it sure knows how to look good anytime a camera is around. Seriously !
2
.kyle
Profile picture for user .kyle
Posts
469
Joined
6/5/2011
Location
GB
.kyle 1/5/2020 6:31am
1/5/2020 6:31am
ledger wrote:
Oh no, I'm back to square one again, lol. I've purchased the 16-18 tank, airbox, and... subframe that I purchased and waiting for from Vitalmx member...
Oh no, I'm back to square one again, lol. I've purchased the 16-18 tank, airbox, and... subframe that I purchased and waiting for from Vitalmx member vbm111 (great guy btw). I guess I'll be the test dummy...lol.
I'm pretty sure you'll be fine. While the frame changed, the mounting points for plastics and subframe should have stayed the same (otherwise it would have cost Kawi money to have altered everything).
1
.kyle
Profile picture for user .kyle
Posts
469
Joined
6/5/2011
Location
GB
.kyle 1/5/2020 6:35am
1/5/2020 6:35am
-MAVERICK- wrote:
[img]https://p.vitalmx.com/photos/forums/2020/01/04/396101/s1200_6632789455.jpg[/img]
Bike looks really good. Although nothing could pull me away from stock plastics. lol.

Those forks (colour) look awesome - are they stock kxf450 ones?
1
-MAVERICK-
Profile picture for user -MAVERICK-
Posts
65478
Joined
3/26/2015
Location
Ontario CA
-MAVERICK- 1/5/2020 6:39am
1/5/2020 6:39am
.kyle wrote:
Bike looks really good. Although nothing could pull me away from stock plastics. lol.

Those forks (colour) look awesome - are they stock kxf450 ones?
Not sure. Just a pic I found, but they do look awesome.
Zeke27G
Profile picture for user Zeke27G
Posts
1400
Joined
11/8/2011
Location
Ascot Park, CA US
Zeke27G 1/5/2020 7:22am
1/5/2020 7:22am
BobPA wrote:
Please people, leave your 03+ Kawasaki’s alone. They are fantastic looking bikes in stock trim. [img]https://p.vitalmx.com/photos/forums/2019/02/25/327918/s1200_2DF1336D_F659_4191_97A5_C39CC366E123.jpg[/img]
Please people, leave your 03+ Kawasaki’s alone. They are fantastic looking bikes in stock trim.




Meanwhile you’re running an ‘89 style look. Sort of hypocritical one could say?
1

Pit Row

See All »
RiverockMX 1/5/2020 8:36am
1/5/2020 8:36am
RiverockMX wrote:
Don't worry.. for your purposes of restyling the minor changes in the chassis won't make any difference. 03-07 plastics are all interchangeable. I did a frame...
Don't worry.. for your purposes of restyling the minor changes in the chassis won't make any difference. 03-07 plastics are all interchangeable. I did a frame up KX250 build.
ledger wrote:
Riverock, do you mind posting a few pic's ? I need all the help I can get,lol.
Ledger I don't think my pics will help you much, the newest restyle kit wasn't available when I did my build.
I still like the result with some upgraded and modified plastics.









3
ledger
Profile picture for user ledger
Posts
3669
Joined
1/17/2013
Location
TN US
ledger 1/5/2020 6:15pm
1/5/2020 6:15pm
RiverockMX wrote:
Don't worry.. for your purposes of restyling the minor changes in the chassis won't make any difference. 03-07 plastics are all interchangeable. I did a frame...
Don't worry.. for your purposes of restyling the minor changes in the chassis won't make any difference. 03-07 plastics are all interchangeable. I did a frame up KX250 build.
ledger wrote:
Riverock, do you mind posting a few pic's ? I need all the help I can get,lol.
RiverockMX wrote:
Ledger I don't think my pics will help you much, the newest restyle kit wasn't available when I did my build. I still like the result...
Ledger I don't think my pics will help you much, the newest restyle kit wasn't available when I did my build.
I still like the result with some upgraded and modified plastics.









Oh lordy...your bike is a stud ! I really like what you've done with the sideplates... opening the intake to increase airflow and lightly trimming the rear of the plate gives it more detail...I always thought the muffler side plate was bulky looking compared to the other side. I see a few obsolete part's that are drool worthy, especially the (Pro Circuit cover). Shrouds look to be from the 06-08 250F/450F ? If the 16-18 KX 450 conversion I'm starting can't be solid, I may ask you for more up close detailed pic's, because that's the direction I'll go. Thank you for taking the time to post your KX, and I can honestly say it's one of the best looking bike's I've ever seen from that generation.
RiverockMX 1/6/2020 10:28am
1/6/2020 10:28am
ledger wrote:
Oh lordy...your bike is a stud ! I really like what you've done with the sideplates... opening the intake to increase airflow and lightly trimming the...
Oh lordy...your bike is a stud ! I really like what you've done with the sideplates... opening the intake to increase airflow and lightly trimming the rear of the plate gives it more detail...I always thought the muffler side plate was bulky looking compared to the other side. I see a few obsolete part's that are drool worthy, especially the (Pro Circuit cover). Shrouds look to be from the 06-08 250F/450F ? If the 16-18 KX 450 conversion I'm starting can't be solid, I may ask you for more up close detailed pic's, because that's the direction I'll go. Thank you for taking the time to post your KX, and I can honestly say it's one of the best looking bike's I've ever seen from that generation.
Thanks happy to help. Shrouds are 07 450F.
1
Kawasakirider612 1/22/2020 2:56pm
1/22/2020 2:56pm
Alright everyone I pulled the trigger and ordered the kit from them, $580 Canadian all included shipped to my door, it was shipped really quick from Spain which was sweet took about a week. Plastics seem decent same with the seat and seat over. From first glance it looks like the plastics are stock '19 250f with some very slight mods to them and then you get a huge thing of mounts and an 18 step install sheet for how to put it together haha. But according to their site if you mangled a plastic in a crash you can order individual from them or buy 2019 250f plastics from your local shop and just copy what they tweaked on them to make it fit with the mounting hardware which is sweet. Hope to have these mounted in the next couple weeks and I'll post pics of it done. Cheers!
3
ledger
Profile picture for user ledger
Posts
3669
Joined
1/17/2013
Location
TN US
ledger 1/22/2020 9:09pm
1/22/2020 9:09pm
Kawasakirider612 wrote:
Alright everyone I pulled the trigger and ordered the kit from them, $580 Canadian all included shipped to my door, it was shipped really quick from...
Alright everyone I pulled the trigger and ordered the kit from them, $580 Canadian all included shipped to my door, it was shipped really quick from Spain which was sweet took about a week. Plastics seem decent same with the seat and seat over. From first glance it looks like the plastics are stock '19 250f with some very slight mods to them and then you get a huge thing of mounts and an 18 step install sheet for how to put it together haha. But according to their site if you mangled a plastic in a crash you can order individual from them or buy 2019 250f plastics from your local shop and just copy what they tweaked on them to make it fit with the mounting hardware which is sweet. Hope to have these mounted in the next couple weeks and I'll post pics of it done. Cheers!
You'll be the first to give a report on the pro's and con's of this kit. Wink I purchased a TX kit years ago to update the look of my 2005 CR 250 and was pleased with the outcome...the seat was a huge surprise, it was as good as OEM Honda quality, and that's noteworthy. Anyway, good luck.
bvm111
Profile picture for user bvm111
Posts
10079
Joined
7/1/2008
Location
Las Vegas, NV US
bvm111 1/22/2020 9:25pm
1/22/2020 9:25pm
RiverockMX wrote:
Don't worry.. for your purposes of restyling the minor changes in the chassis won't make any difference. 03-07 plastics are all interchangeable. I did a frame...
Don't worry.. for your purposes of restyling the minor changes in the chassis won't make any difference. 03-07 plastics are all interchangeable. I did a frame up KX250 build.
ledger wrote:
Riverock, do you mind posting a few pic's ? I need all the help I can get,lol.
RiverockMX wrote:
Ledger I don't think my pics will help you much, the newest restyle kit wasn't available when I did my build. I still like the result...
Ledger I don't think my pics will help you much, the newest restyle kit wasn't available when I did my build.
I still like the result with some upgraded and modified plastics.









Looks good, how did you get the pipe like that? Is it a PC Pipe that was torched for the cone look? Also, Was this picture taken up at Joes track? if yes, we should meet up there for a ride!
RiverockMX 1/23/2020 8:32am
1/23/2020 8:32am
bvm111 wrote:
Looks good, how did you get the pipe like that? Is it a PC Pipe that was torched for the cone look? Also, Was this picture...
Looks good, how did you get the pipe like that? Is it a PC Pipe that was torched for the cone look? Also, Was this picture taken up at Joes track? if yes, we should meet up there for a ride!
I have a few pipes for the bike, one pictured is actually a DEP with a piperepair cone finish. I also have a FMF works fatty for the 05-07 that I can't use if you or anyone's interested. Joes's track was great for the photo shoot although riding there is hit 'n miss weather dependent. Maybe see ya at Western?
hopsrev86 3/11/2020 10:33pm
3/11/2020 10:33pm
Kawasakirider612 wrote:
Alright everyone I pulled the trigger and ordered the kit from them, $580 Canadian all included shipped to my door, it was shipped really quick from...
Alright everyone I pulled the trigger and ordered the kit from them, $580 Canadian all included shipped to my door, it was shipped really quick from Spain which was sweet took about a week. Plastics seem decent same with the seat and seat over. From first glance it looks like the plastics are stock '19 250f with some very slight mods to them and then you get a huge thing of mounts and an 18 step install sheet for how to put it together haha. But according to their site if you mangled a plastic in a crash you can order individual from them or buy 2019 250f plastics from your local shop and just copy what they tweaked on them to make it fit with the mounting hardware which is sweet. Hope to have these mounted in the next couple weeks and I'll post pics of it done. Cheers!
Hello, any update on how the kit turned out? I am thinking about getting one.
mattyhamz2 3/11/2020 10:42pm
3/11/2020 10:42pm
bvm111 wrote:
Looks good, how did you get the pipe like that? Is it a PC Pipe that was torched for the cone look? Also, Was this picture...
Looks good, how did you get the pipe like that? Is it a PC Pipe that was torched for the cone look? Also, Was this picture taken up at Joes track? if yes, we should meet up there for a ride!
RiverockMX wrote:
I have a few pipes for the bike, one pictured is actually a DEP with a piperepair cone finish. I also have a FMF works fatty...
I have a few pipes for the bike, one pictured is actually a DEP with a piperepair cone finish. I also have a FMF works fatty for the 05-07 that I can't use if you or anyone's interested. Joes's track was great for the photo shoot although riding there is hit 'n miss weather dependent. Maybe see ya at Western?
You still have that FMF laying around?
arunkxf
Profile picture for user arunkxf
Posts
81
Joined
5/16/2012
Location
London GB
arunkxf 3/12/2020 7:42am
3/12/2020 7:42am
Loving these Kawis and the re style kit, its making me want one!
1
1
AH387
Profile picture for user AH387
Posts
1624
Joined
8/29/2019
Location
Bridgeville, PA US
AH387 3/12/2020 9:08am
3/12/2020 9:08am
I've never been much of a fan of the restyle kits. They did a really good job on this one, considering. I am not a huge fan of the stock Kawi 2 stroke plastic to begin with, but I do think this kit improves on it. Either way, it's good to finally have a Kawi option for people who are looking for something.
1
1
RiverockMX 3/12/2020 9:27am
3/12/2020 9:27am
mattyhamz2 wrote:
You still have that FMF laying around?
Still have it PM for details.

Post a reply to: TX RACE™ Restyle Kit® for KX finally launched !!