Where can you buy 52mm Cone Valve Forks?

Langhammx
Posts
10116
Joined
5/5/2011
Location
USA, CO, USA
2/28/2017 8:58pm
slipdog wrote:
I may or may not know of a couple sets of current factory 52's available with clamps. How much are you willing to spend?
TeamGreen wrote:
Yes, you do.

They are "current" and they are $6K per set w/ The FS shock.
Aka, "Red Caps".
Wait... Those were 52's ? You didn't mention that. Shocked
TeamGreen
Posts
37840
Joined
11/25/2008
Location
Thru-out, CA, USA
2/28/2017 8:59pm
slipdog wrote:
I may or may not know of a couple sets of current factory 52's available with clamps. How much are you willing to spend?
TeamGreen wrote:
Yes, you do.

They are "current" and they are $6K per set w/ The FS shock.
Aka, "Red Caps".
Langhammx wrote:
Wait... Those were 52's ? You didn't mention that. Shocked
Red Caps, as run...currently...
AND...the matching Factory Services shock.
Ehm24
Posts
127
Joined
12/9/2014
Location
San Diego, CA, USA
2/28/2017 9:20pm
slipdog wrote:
I may or may not know of a couple sets of current factory 52's available with clamps. How much are you willing to spend?
about tree fiddy

The Shop

slipdog
Posts
10054
Joined
7/25/2009
Location
Nor Cal, CA, USA
2/28/2017 9:37pm
slipdog wrote:
I may or may not know of a couple sets of current factory 52's available with clamps. How much are you willing to spend?
Ehm24 wrote:
about tree fiddy


gsxr6
Posts
1956
Joined
9/3/2011
Location
Anderson, CA, USA
2/28/2017 9:44pm


Newest WP works forks. Taking offers.....Pm ur bank acct number and routing info and I'll handle the rest.
1
gsxr6
Posts
1956
Joined
9/3/2011
Location
Anderson, CA, USA
2/28/2017 9:44pm Edited Date/Time 2/28/2017 10:05pm
Handlebars go in the holes in the top. No triple clamps needed. Shaves another few lbs......Bought them from a guy who can wheelie for miles. In Baltimore. He said they never seen dirt.....
CarlinoJoeVideo
Posts
7516
Joined
11/30/2013
Location
Portland/Los Angeles, CA, USA
3/1/2017 3:51am Edited Date/Time 3/1/2017 3:52am
I rode a set of 52s on my friends bike and prefer the feel of the 48s on my bike. Maybe his clamps were extra stiff considering I'm running the XTrig ROcs clamps which maybe feel softer? I guess both set ups are opposite.

On a positive note With the 52s and stiffer clamps you do have really good feeling, like you know exactly where the front end is going and what it wants to do. So maybe once you get used to it that will be a good thing.
captmoto
Posts
5931
Joined
4/22/2009
Location
Rancho Cucamonga, CA, USA
3/1/2017 4:14pm
fatcat wrote:
Yes, they will fit straight up. You need to run the bigger axle and wheel spacers, which I am providing.
Isn't that also going to take bigger wheel bearings as well?
Justin345
Posts
643
Joined
6/26/2014
Location
Southern MD, MD, USA
3/1/2017 4:34pm
slipdog wrote:
I may or may not know of a couple sets of current factory 52's available with clamps. How much are you willing to spend?
I don't even own a KTM but am tempted to buy those!
CarlinoJoeVideo
Posts
7516
Joined
11/30/2013
Location
Portland/Los Angeles, CA, USA
3/1/2017 6:18pm
fatcat wrote:
Yes, they will fit straight up. You need to run the bigger axle and wheel spacers, which I am providing.
captmoto wrote:
Isn't that also going to take bigger wheel bearings as well?
Same bearings, the axel spacers make the difference.
ktmman
Posts
39
Joined
2/11/2017
Location
San Diego, CA, USA
3/1/2017 8:41pm
A larger air/oil volume provides for a more progressive air "spring" making them less "rigid". A larger diameter on the legs provides for less flex of...
A larger air/oil volume provides for a more progressive air "spring" making them less "rigid".

A larger diameter on the legs provides for less flex of components, making them bind less and therefore less "rigid".

Less flex allows for greater precision in directional control from twisting forces.

52mm forks may be one of the last great areas of improvement that are well developed and have never been made available to the general public. Every year for 10+ years I keep thinking KTM will release them and I will buy a KTM because of it.
Katoomey wrote:
When people talk about rigidity and forks. They ARE talking about flex. Flex and rigidity mean the same thing in this context. For someone claiming to...
When people talk about rigidity and forks. They ARE talking about flex. Flex and rigidity mean the same thing in this context.

For someone claiming to know things, you should know this.
I'm not sure what you mean? Obviously 52mm forks flex less than 35mm forks if you are only considering tube flex. There seems to be a...
I'm not sure what you mean? Obviously 52mm forks flex less than 35mm forks if you are only considering tube flex. There seems to be a common sense that is all there is to the equation. When the larger air spring and less bushing binding and wear from less flex is considered, the net result is a smoother ride, similar to more flex.

There are stories of David Knight failing to return his 52mm forks from his KTM days. He loved them so much he used them on his next few rides. Many assume that only the fastest riders doing the biggest triples can benefit from them, and there was a long held story about the aluminum lower tubes having a short service life. None of that appears to be true.

I have never ridden with them, just theorizing some science. If they made them stock on the FE's I would be 1st in line with my wallet.
I second this notion! WP and KTM need to offer these forks to the general public!
ktmman
Posts
39
Joined
2/11/2017
Location
San Diego, CA, USA
3/1/2017 8:42pm
Slipdog you will have some 52's available for purchase?
slipdog
Posts
10054
Joined
7/25/2009
Location
Nor Cal, CA, USA
3/1/2017 9:15pm
ktmman wrote:
Slipdog you will have some 52's available for purchase?
PM sent!
CrGuy2T
Posts
4537
Joined
3/11/2015
Location
Santa Fe, TX, USA
3/1/2017 9:37pm
I know where a set are. They used to be mine. I will forward him this post maybe he will respond.
fatcat
Posts
206
Joined
2/1/2016
Location
Louisville, KY, USA
3/1/2017 9:41pm
CrGuy2T wrote:
I had two sets. The member is in here I believe he's trying to sell one set and the have clamps as well.
fatcat wrote:
CrGuy is correct. I have a set I bought from him a year ago. I will take 3000 + shipping. Includes 52mm CV forks, orange Neken...
CrGuy is correct. I have a set I bought from him a year ago. I will take 3000 + shipping. Includes 52mm CV forks, orange Neken clamps w/stem and bearing, axle and spacers.

Here they are, still for sale.
Johnny Depp
Posts
6433
Joined
10/16/2014
Location
Buda, TX, USA
3/2/2017 8:31am Edited Date/Time 3/2/2017 8:35am
This thread is kinda like a drug deal, I know a friend of a friend who might be able to hook you up..

Does anyone who has put them on their bike have any review for us unwashed masses? There are obviously a few people selling them who we may assume don't care for them and don't want to hurt the resale value? Or perhaps getting rid of the old version so they can snag the newer version?

Now for the real latest greatest, do you like AER or springs? I understand both are out there in 52mm.


http://motocross.transworld.net/news/all-about-andrew-shorts-wp-aer-for…

Now build the RE with the air shock and WOW! Most of us Vets are unlikely to spend $6k for an upgrade, but maybe $3k more if they came stock, Hell Yes.


Here's from a few years back: http://motocrossactionmag.com/bike-tests/mxdn-iron-we-ride-ryan-dungeys…

"We expected Dungey’s massive 52mm, all-aluminum, WP Cone Valve forks to be rigid. Not so! They were very nice."

fatcat
Posts
206
Joined
2/1/2016
Location
Louisville, KY, USA
3/2/2017 4:15pm
This thread is kinda like a drug deal, I know a friend of a friend who might be able to hook you up.. Does anyone who...
This thread is kinda like a drug deal, I know a friend of a friend who might be able to hook you up..

Does anyone who has put them on their bike have any review for us unwashed masses? There are obviously a few people selling them who we may assume don't care for them and don't want to hurt the resale value? Or perhaps getting rid of the old version so they can snag the newer version?

Now for the real latest greatest, do you like AER or springs? I understand both are out there in 52mm.


http://motocross.transworld.net/news/all-about-andrew-shorts-wp-aer-for…

Now build the RE with the air shock and WOW! Most of us Vets are unlikely to spend $6k for an upgrade, but maybe $3k more if they came stock, Hell Yes.


Here's from a few years back: http://motocrossactionmag.com/bike-tests/mxdn-iron-we-ride-ryan-dungeys…

"We expected Dungey’s massive 52mm, all-aluminum, WP Cone Valve forks to be rigid. Not so! They were very nice."

No drugs to sell, just forks ! I bought 2 sets of the 52's last year from a vital member. I have raced with them & I think they perform really good. I'm probably not the best source for a review of these forks, because I'm just not that fast ! They do help me when I come up short or over jump, they are very forgiving and I never feel them bottom out. I bought them because they were available and they look badass. I'm keeping one set and selling the other. I had interest from a Vital member looking to buy. After talking to WP about getting them serviced and set up, he was no longer interested. He posted a thread here on Vital with WP's response, stating they will no longer sell or service the 52's for the general public. This kinda sucks because they would have looked really sweet on his Husky ! I have also raced with 48 cone valves and they are pretty damn awesome as well. At my race pace I can't feel a big difference, both are very comfortable. I will say I have never felt the super stiff, rigid feeling that some have described with the 52's. My bike came stock with the WP 4CS forks and I can say the cone valves are an improvement, bigly !
3/25/2017 9:58pm
slipdog wrote:
I may or may not know of a couple sets of current factory 52's available with clamps. How much are you willing to spend?
Are these still available?
ktmgod
Posts
2
Joined
4/30/2018
Location
USA
4/30/2018 9:16pm
Fuck WP, 52mm cone valve forks are god like and they do not offer them to the public, because only the factory riders get safe, good suspension, my buddy had a schrader valve on the top cap of his shit air fork that comes stock on KTMs blow off during a moto and it caused him to go over the bars at 50 mph, almost crippled him!
tek14
Posts
4987
Joined
1/26/2014
Location
Vantaa, FI
5/1/2018 12:19am
ktmgod wrote:
Fuck WP, 52mm cone valve forks are god like and they do not offer them to the public, because only the factory riders get safe, good...
Fuck WP, 52mm cone valve forks are god like and they do not offer them to the public, because only the factory riders get safe, good suspension, my buddy had a schrader valve on the top cap of his shit air fork that comes stock on KTMs blow off during a moto and it caused him to go over the bars at 50 mph, almost crippled him!
Well that sounds more like drugdealer story...
DoubleA
Posts
406
Joined
11/17/2017
Location
GB
5/1/2018 3:04am
Hunter Root sold his brothers on here. I am sure if you speak to Austin or Hunter they'll give you a review on them .
Jimfunn
Posts
437
Joined
4/17/2013
Location
GB
5/1/2018 3:42am
ML52 spoke about this on Pulpshow a week or 2 ago. Interesting that they make it almost unobtainable for anyone outside of factory or factory supported teams to get hold of. considering then "production" rules in 250 SX...
Anonymous (not verified)
5/1/2018 7:20am Edited Date/Time 9/1/2026 6:11pm
This thread is kinda like a drug deal, I know a friend of a friend who might be able to hook you up.. Does anyone who...
This thread is kinda like a drug deal, I know a friend of a friend who might be able to hook you up..

Does anyone who has put them on their bike have any review for us unwashed masses? There are obviously a few people selling them who we may assume don't care for them and don't want to hurt the resale value? Or perhaps getting rid of the old version so they can snag the newer version?

Now for the real latest greatest, do you like AER or springs? I understand both are out there in 52mm.


http://motocross.transworld.net/news/all-about-andrew-shorts-wp-aer-for…

Now build the RE with the air shock and WOW! Most of us Vets are unlikely to spend $6k for an upgrade, but maybe $3k more if they came stock, Hell Yes.


Here's from a few years back: http://motocrossactionmag.com/bike-tests/mxdn-iron-we-ride-ryan-dungeys…

"We expected Dungey’s massive 52mm, all-aluminum, WP Cone Valve forks to be rigid. Not so! They were very nice."

fatcat wrote:
No drugs to sell, just forks ! I bought 2 sets of the 52's last year from a vital member. I have raced with them &...
No drugs to sell, just forks ! I bought 2 sets of the 52's last year from a vital member. I have raced with them & I think they perform really good. I'm probably not the best source for a review of these forks, because I'm just not that fast ! They do help me when I come up short or over jump, they are very forgiving and I never feel them bottom out. I bought them because they were available and they look badass. I'm keeping one set and selling the other. I had interest from a Vital member looking to buy. After talking to WP about getting them serviced and set up, he was no longer interested. He posted a thread here on Vital with WP's response, stating they will no longer sell or service the 52's for the general public. This kinda sucks because they would have looked really sweet on his Husky ! I have also raced with 48 cone valves and they are pretty damn awesome as well. At my race pace I can't feel a big difference, both are very comfortable. I will say I have never felt the super stiff, rigid feeling that some have described with the 52's. My bike came stock with the WP 4CS forks and I can say the cone valves are an improvement, bigly !
You don't need WP to service them. And I'm not sure why anybody would use WP for any service anyway. I have never heard a good thing about their service.
slipdog
Posts
10054
Joined
7/25/2009
Location
Nor Cal, CA, USA
5/1/2018 7:53am
Anonymous wrote:
You don't need WP to service them. And I'm not sure why anybody would use WP for any service anyway. I have never heard a good...
You don't need WP to service them. And I'm not sure why anybody would use WP for any service anyway. I have never heard a good thing about their service.
The problem is WP won't sell the parts for them anymore. Anyone can do a fluid change, but there is no source for seals, bushings or any other internal part. I hear even one of the teams is having a problem getting enough parts for their riders.
AJ565
Posts
2362
Joined
3/12/2012
Location
San Antonio, TX, USA
5/1/2018 8:58am
slipdog wrote:
The problem is WP won't sell the parts for them anymore. Anyone can do a fluid change, but there is no source for seals, bushings or...
The problem is WP won't sell the parts for them anymore. Anyone can do a fluid change, but there is no source for seals, bushings or any other internal part. I hear even one of the teams is having a problem getting enough parts for their riders.
So they went from next to impossible to get parts to certain suspension companies are able to work on them and get parts back to nobody can get parts anymore? I'm asking because I've been eye balling a set of them, but if I can't get them serviced and rebuilt I'll just get my AER48's revalved.
Johnny Depp
Posts
6433
Joined
10/16/2014
Location
Buda, TX, USA
5/1/2018 9:23am
There is nothing more coveted and desirable than something you can't get.
Motofinne
Posts
11664
Joined
1/4/2014
Location
FI
5/1/2018 9:25am
slipdog wrote:
The problem is WP won't sell the parts for them anymore. Anyone can do a fluid change, but there is no source for seals, bushings or...
The problem is WP won't sell the parts for them anymore. Anyone can do a fluid change, but there is no source for seals, bushings or any other internal part. I hear even one of the teams is having a problem getting enough parts for their riders.
AJ565 wrote:
So they went from next to impossible to get parts to certain suspension companies are able to work on them and get parts back to nobody...
So they went from next to impossible to get parts to certain suspension companies are able to work on them and get parts back to nobody can get parts anymore? I'm asking because I've been eye balling a set of them, but if I can't get them serviced and rebuilt I'll just get my AER48's revalved.
Or you could get the 48mm CV forks?
AJ565
Posts
2362
Joined
3/12/2012
Location
San Antonio, TX, USA
5/1/2018 12:00pm
Motofinne wrote:
Or you could get the 48mm CV forks?
I haven't seen many or really any AER48 CV for sale lately. This was a used set of 52's I was looking at is the only reason I was asking.

Post a reply to: Where can you buy 52mm Cone Valve Forks?

The Latest