2006 Yz250 Makeover Factory A Kit Suspension

motocross18
Profile picture for user motocross18
Posts
34
Joined
2/2/2015
Location
Sunset Beach, CA US
motocross18
Edited Date/Time 3/4/2015 12:23am
I just bought this bike it's a 2006 yz250. The guy I bought from didn't really take care of it or know what he had. I tracked down the original owner a got more info on the bike.
 
-Brandon Jessemens A kit suspension from 2008 50mm 
- 2 Piece shock from KYM/ENZO (you're talking close to $10,000)
- Miscellaneous titanium bolts
- Possible magnesium carb (How do i identify?)
- Possible titanium pegs (How do i identify?)
- V force reeds
- FMF pip
- pro circuit factory shorty
- Defiantly has motor work but i'm not sure as to what extent.
 
This is all i basically know about the bike right now and here are my plans. Any input and help would be appreciated
 
-Tear the bike down 
- Take the suspension to factory connection or enzo and get it serviced, and set up for my weight
- Order the updated plastic kit
- Clean everything inside and out
- Check all the bearings
- Get new bars, chain, ect. 
 
 
Here's how it sits now 
 
[img=https://i.imgur.com/y0i1IBG.jpg]
|
swtwtwtw
Profile picture for user swtwtwtw
Posts
1287
Joined
4/16/2008
Location
Apple Valley, CA US
swtwtwtw 2/19/2015 2:23am
2/19/2015 2:23am
Buy the 2015 OEM plastics....I think it is better looking than the UFO kit.
Dragoo168
Profile picture for user Dragoo168
Posts
239
Joined
4/14/2014
Location
NV US
Dragoo168 2/19/2015 8:19am
2/19/2015 8:19am
Nice find!
Bruce372
Profile picture for user Bruce372
Posts
6329
Joined
4/1/2008
Location
US
Bruce372 2/19/2015 10:49am
2/19/2015 10:49am
just set the carb on fire, magnesium burns with a beautiful white flame! Smile
Skerby
Profile picture for user Skerby
Posts
1282
Joined
4/9/2013
Location
Mayes County, OK US
Skerby 2/19/2015 11:13am
2/19/2015 11:13am
What did you pay for it? If you don't mind telling

The Shop

See All »
jhansen510
Profile picture for user jhansen510
Posts
2406
Joined
2/10/2009
Location
GREENFIELD, MN US
jhansen510 2/19/2015 12:48pm
2/19/2015 12:48pm
If they are 50mm forks good luck trying to find a place that will service them! I do not believe enzo will do it.
jhansen510
Profile picture for user jhansen510
Posts
2406
Joined
2/10/2009
Location
GREENFIELD, MN US
jhansen510 2/19/2015 12:49pm
2/19/2015 12:49pm
Also get us some better pics man! That is a party foul!
slipdog
Profile picture for user slipdog
Posts
10055
Joined
7/25/2009
Location
Nor Cal, CA US
slipdog 2/19/2015 2:05pm
2/19/2015 2:05pm
I thought those 50mm weren't available to the public. That means someone illegally sold that bike with those forks and you may or may not get them back from Enzo if you take them there. I may be wrong, but I know of at least one guy that got some special Honda suspension one year and showed up at a National and the Showa guys took the suspension from him.
AS64
Profile picture for user AS64
Posts
1751
Joined
5/14/2012
Location
CA
AS64 2/19/2015 3:53pm
2/19/2015 3:53pm
slipdog wrote:
I thought those 50mm weren't available to the public. That means someone illegally sold that bike with those forks and you may or may not get...
I thought those 50mm weren't available to the public. That means someone illegally sold that bike with those forks and you may or may not get them back from Enzo if you take them there. I may be wrong, but I know of at least one guy that got some special Honda suspension one year and showed up at a National and the Showa guys took the suspension from him.
Holy smokes! Any more info on this?
rmartin517
Profile picture for user rmartin517
Posts
474
Joined
7/27/2014
Location
Dickinson, TX US
rmartin517 2/19/2015 4:30pm
2/19/2015 4:30pm
The 50mm weren't available for a while but everything has a shelf life. There was a set of 50mm on ebay a while back. Only thing I read on them is they are very rigid but good when they get dialed in. Nice bike for sure. More pics.
Hondas4Life3
Profile picture for user Hondas4Life3
Posts
908
Joined
7/30/2013
Location
Spring Hill , KS US
Hondas4Life3 2/20/2015 4:42pm
2/20/2015 4:42pm
Nice find!
motocross18
Profile picture for user motocross18
Posts
34
Joined
2/2/2015
Location
Sunset Beach, CA US
motocross18 2/20/2015 10:59pm
2/20/2015 10:59pm
I'll post some better pics tomorrow. They are 50mm 100% sure. The guy who originally built this bike is on vitalmx (gouldracing25) he built the bike for the glen Helen 2 stroke national in 2013 then sold it to someone else, then he sold it someone else, then i picked it up from him. Maybe Gould will come in this thread and give us more info

HenryA
Profile picture for user HenryA
Posts
3785
Joined
12/29/2011
Location
Stockholm SE
HenryA 2/21/2015 7:51am
2/21/2015 7:51am
Nice find! The triple clamps looks huge, you need to post more pictures of the bike asap. Smile
motocross18
Profile picture for user motocross18
Posts
34
Joined
2/2/2015
Location
Sunset Beach, CA US
motocross18 2/22/2015 3:02pm
2/22/2015 3:02pm Edited Date/Time 2/22/2015 3:03pm





rocketsocks26 2/22/2015 3:32pm
2/22/2015 3:32pm
Alsome find! I think your gonna have a problem getting the suspension serviced, but at the same time, u did nothing wrong, that has dream build all over it!

Pit Row

See All »
rmartin517
Profile picture for user rmartin517
Posts
474
Joined
7/27/2014
Location
Dickinson, TX US
rmartin517 2/22/2015 3:37pm
2/22/2015 3:37pm
Call Craig decker in Dallas enzo. He will help you out.
motocross18
Profile picture for user motocross18
Posts
34
Joined
2/2/2015
Location
Sunset Beach, CA US
motocross18 2/22/2015 3:54pm
2/22/2015 3:54pm
rmartin517 wrote:
Call Craig decker in Dallas enzo. He will help you out.
I'll give him a call. Thanks!
rmartin517
Profile picture for user rmartin517
Posts
474
Joined
7/27/2014
Location
Dickinson, TX US
rmartin517 2/22/2015 8:09pm
2/22/2015 8:09pm Edited Date/Time 2/22/2015 8:10pm
He's pretty cool. Your gonna need someone familiar with this stuff for sure to help get it set up correctly. It was hard getting my A kit dialed. I have read the 50mm kyb stuff is a bit tough to get set up. Everyone is going to tell you that the suspension shops are gonna steal your parts and all that good stuff. The key is getting it working for you. The odds of whatever is in those forks won't work for Most people anyway. Most people think you can just throw kit suspension on a bike and it will work fine no matter what. It has to be set up for you or it will definantly be a problem. It wouldn't effect a beginner so much as a more experienced rider as a beginner doesn't understand what the suspension is doing. Cool find for sure. I would be curious to see if it had any carbon fiber or to parts internally though.
motocross18
Profile picture for user motocross18
Posts
34
Joined
2/2/2015
Location
Sunset Beach, CA US
motocross18 2/24/2015 3:41pm
2/24/2015 3:41pm Edited Date/Time 2/24/2015 3:42pm
Just took the suspension to someone local who i won't disclose and he's going to get it all set up for me. Finding seals for the 50mm forks is going to be the hardest task because the forks aren't available to the public and that means the parts aren't available either. Apparently Jlaw ran these same forks and he might have some left over seals from that. If worst comes worst we will use the 50mm Marzochi fork seals and get the tubes cnc'd to fit.
GouldRacing25
Profile picture for user GouldRacing25
Posts
407
Joined
10/20/2014
Location
INLAND EMPIRE, CA US
GouldRacing25 3/3/2015 2:15pm
3/3/2015 2:15pm
Hey bud ill take my # plates back!!! haha. Did you ride the bike first to see if the suspension was even close for you?
GouldRacing25
Profile picture for user GouldRacing25
Posts
407
Joined
10/20/2014
Location
INLAND EMPIRE, CA US
GouldRacing25 3/3/2015 2:18pm
3/3/2015 2:18pm
Hey bud ill take my # plates back!!! haha. Did you ride the bike first to see if the suspension was even close for you? And yes their ABSOLUTELY 50mm forks. I called enzo and asked and they confirmed and they said that those forks are VERY VERY VERY hard to come by!!!
motocross18
Profile picture for user motocross18
Posts
34
Joined
2/2/2015
Location
Sunset Beach, CA US
motocross18 3/4/2015 12:18am
3/4/2015 12:18am
GouldRacing25 wrote:
Hey bud ill take my # plates back!!! haha. Did you ride the bike first to see if the suspension was even close for you? And...
Hey bud ill take my # plates back!!! haha. Did you ride the bike first to see if the suspension was even close for you? And yes their ABSOLUTELY 50mm forks. I called enzo and asked and they confirmed and they said that those forks are VERY VERY VERY hard to come by!!!
Haha if you're serious I do have them and will give them to you. I'm in the so cal area as well. I weigh 200 pounds and the springs were for someone 160 which is why i'm having them resprung Smile
GouldRacing25
Profile picture for user GouldRacing25
Posts
407
Joined
10/20/2014
Location
INLAND EMPIRE, CA US
GouldRacing25 3/4/2015 12:23am
3/4/2015 12:23am
Call me if you can. I got a new phone and I didn't save your number
CrGuy2T
Profile picture for user CrGuy2T
Posts
4503
Joined
3/11/2015
Location
Santa Fe, TX US
CrGuy2T 8/22/2016 4:40pm
8/22/2016 4:40pm
What ever became of this bike?
Helder
Profile picture for user Helder
Posts
1045
Joined
5/16/2015
Location
AU
Helder 8/22/2016 8:12pm
8/22/2016 8:12pm
Id like to know also! Would have been a sweet bike
Spuder155 8/23/2016 4:46am
8/23/2016 4:46am
Helder wrote:
Id like to know also! Would have been a sweet bike
x2
Shields18 8/23/2016 6:23am
8/23/2016 6:23am
Helder wrote:
Id like to know also! Would have been a sweet bike
Spuder155 wrote:
x2
x3

Post a reply to: 2006 Yz250 Makeover Factory A Kit Suspension