RM250 replica help

Deetsmx
Profile picture for user Deetsmx
Posts
888
Joined
4/21/2008
Location
Visalia, CA US
Deetsmx 4/9/2012 7:36am
4/9/2012 7:36am
Deetsmx wrote:
Here is where I'm at so far. Painted the frame black and will put black frame tape on instead of the gray stuff that's on there...
Here is where I'm at so far. Painted the frame black and will put black frame tape on instead of the gray stuff that's on there now. Just waiting on the Scalvini pipe that should be here next week. I know black rims would look good but don't really feel like spending the money on them. Motor is done by Gorr, first real ride tomorrow.
Travis_Hudson wrote:
Who made the seat cover? I love it!
It's an SDG but you have to order it from decalworks, I couldn't find it anywhere else so I'm thinking they got some covers made specifically for them.
YZach
Profile picture for user YZach
Posts
99
Joined
3/10/2010
Location
CA US
YZach 4/9/2012 1:17pm
4/9/2012 1:17pm
Here's my 06 -

The Shop

See All »
MX_er424
Profile picture for user MX_er424
Posts
41
Joined
8/25/2011
Location
Canyondam, CA US
MX_er424 4/9/2012 1:54pm
4/9/2012 1:54pm
YZach wrote:
Here's my 06 - [IMG]http://i5.photobucket.com/albums/y159/fudunk69/RM.jpg[/IMG]
Here's my 06 -
Holy shit that is clean. That's how you do it right there.
sam111
Profile picture for user sam111
Posts
417
Joined
2/1/2009
Location
NZ
sam111 4/9/2012 2:34pm
4/9/2012 2:34pm Edited Date/Time 6/6/2012 5:32pm
I always liked the way these bikes looked:

2004 AMA Factory RM250


2008 MX1 Factory RMZ450
mx757
Profile picture for user mx757
Posts
2275
Joined
4/1/2008
Location
Pueblo, CO US
mx757 4/9/2012 2:44pm
4/9/2012 2:44pm
Holesyaaat wrote:
I can't seem to find a picture of it... but the Team Subway Suzuki privateer team a few years back had some cool bikes. I think...
I can't seem to find a picture of it... but the Team Subway Suzuki privateer team a few years back had some cool bikes. I think Ted Campbell rode on one.

If someone could find a picture, I'd be much obliged.
I am pretty sure that team was on hondas with white plastic.
Cygnus
Profile picture for user Cygnus
Posts
14846
Joined
8/15/2006
Location
Hanover, CO US
Cygnus 4/9/2012 3:15pm
4/9/2012 3:15pm
Lots of nice bikes in this thread! glad I checked it out.
dl117
Profile picture for user dl117
Posts
1548
Joined
2/8/2007
Location
Cambridge, MN US
dl117 4/10/2012 5:37am
4/10/2012 5:37am
dl117 wrote:
http://www.vitalmx.com/profile_manager/photo_albums/1227/photos/all/edit

here is mine.....up next is powder the frame blue, and have my graphics guy make me Full Floater swing arm decals
Parris wrote:
What about a powder coat blue swing arm with the Full Floater decal? I have never seen that.
That might be cool, might put a blue decal in it to see what it look like before i powder it. I found a guy that coated my daughters BMX race bike and he will do my frame for $80
queen of spodes 4/10/2012 6:51am
4/10/2012 6:51am Edited Date/Time 4/10/2012 6:53am
These were posted in Old School moto a few weeks ago.. 'pete24' did them up for a customer of his. I am in love with this bike.





Graphics by http://www.K-RaeGraphics.com
Digger29
Profile picture for user Digger29
Posts
1885
Joined
11/2/2011
Location
Oxford, MA US
Digger29 4/11/2012 1:28pm
4/11/2012 1:28pm
I bought that blueberry (as we called it) & like 5 other RM250's from the the guys who own them back here in Ma.
burn1986
Profile picture for user burn1986
Posts
12246
Joined
4/16/2010
Location
bossier city, LA US
burn1986 4/11/2012 1:31pm
4/11/2012 1:31pm
queen of spodes wrote:
These were posted in Old School moto a few weeks ago.. 'pete24' did them up for a customer of his. I am in love with this...
These were posted in Old School moto a few weeks ago.. 'pete24' did them up for a customer of his. I am in love with this bike.





Graphics by http://www.K-RaeGraphics.com
Wow, I definitely need more info on this one. Are those some 96-98 forks?!
queen of spodes 4/11/2012 1:40pm
4/11/2012 1:40pm Edited Date/Time 4/11/2012 1:41pm
burn1986 wrote:
Wow, I definitely need more info on this one. Are those some 96-98 forks?!
Yes, the builder said it wasn't a perfect bolt-on.. I would have stuck with the USD's - not that attached to 80's tech. I just love the blue frame & motor, and simple, clean graphics.

If I ever finish working on This Old House I plan to do the same with my '01 RM125.

queen of spodes 4/11/2012 1:42pm
4/11/2012 1:42pm
Digger29 wrote:
I bought that blueberry (as we called it) & like 5 other RM250's from the the guys who own them back here in Ma.
Got any track pics or videos of that bike in action?
Digger29
Profile picture for user Digger29
Posts
1885
Joined
11/2/2011
Location
Oxford, MA US
Digger29 4/11/2012 2:19pm
4/11/2012 2:19pm
No sorry I don't. The guys who owned it & like 12 RM250's in 2010 when they built that one are both in their early 40's & indentical twins & they are blazing fast. Ive known them since they were like 15yrs old & they were fast then too! Right now they are both riding YZ125's in the vet expert & expert class & hurting peoples feeling every wk back here in NE when they blow by guys on 450's on their 125's. The only guy who can beat them in the 40 plus expert is John Dowd & that's it.
Digger29
Profile picture for user Digger29
Posts
1885
Joined
11/2/2011
Location
Oxford, MA US
Digger29 4/11/2012 2:23pm
4/11/2012 2:23pm
I bought that bike (& a few other RM250's of theirs) in 2010. The motor was done by a guy in Florida & while it was really good it wasn't not nearly as fast or easy to ride as my current RM250. The forks were AWESOME! So I found a pr on ebay & put them on my bike too.
Digger29
Profile picture for user Digger29
Posts
1885
Joined
11/2/2011
Location
Oxford, MA US
Digger29 4/11/2012 2:32pm
4/11/2012 2:32pm
The conventional forks we all used were 1998 RM125,250 forks. If you plan on doing it ONLY get the 1998 125 or 250 forks because the have the newer style internals & are very much like the forks we are running today & the 98 forks have least amount of underhang below the axle & you'll have an easier time getting parts for them. They work great & are really much better action wise than my stock or my kit Showa USD forks.

Pit Row

See All »
NorcalVet
Profile picture for user NorcalVet
Posts
639
Joined
9/6/2007
Location
Nor-cal, CA US
NorcalVet 4/11/2012 2:44pm
4/11/2012 2:44pm
Deetsmx wrote:
Here is where I'm at so far. Painted the frame black and will put black frame tape on instead of the gray stuff that's on there...
Here is where I'm at so far. Painted the frame black and will put black frame tape on instead of the gray stuff that's on there now. Just waiting on the Scalvini pipe that should be here next week. I know black rims would look good but don't really feel like spending the money on them. Motor is done by Gorr, first real ride tomorrow.
.... more info on the Scalvini pipe & silencer (c/f?)?
They look bad a$$, I heard their performance is just as good?
Price?


PS: I just ordered some CTO tearoffs.... another pack of 50 for my progrips!!!

Oatfielddddddd this Sat, I'll need 'em!!
NorcalVet
Profile picture for user NorcalVet
Posts
639
Joined
9/6/2007
Location
Nor-cal, CA US
NorcalVet 4/11/2012 2:52pm
4/11/2012 2:52pm
NorcalVet wrote:
.... I just got my RM 250 last month. Finally took it out for some track time at MMX in m-ville last week --- What a...
.... I just got my RM 250 last month. Finally took it out for some track time at MMX in m-ville last week
--- What a freekn' blast to ride Cool

--- I went for more of the Rockstar Lites look.... '11 RMZ fender and plate mod. Susp done also



Digger29 wrote:
Mike, you need to put a cpl of washers under the rear 2 holes of the fender to space it correctly. I didn't like the way...
Mike, you need to put a cpl of washers under the rear 2 holes of the fender to space it correctly. I didn't like the way that the 2011 fender tipped way down in the front when we first put it on so I spaced it so it would look like it followed the contour of the tire better. Just my 2 cents :-)
Thanks.... I'll check it out today. Prepping both bikes today for a race on Sat
--- I'll compare my RMZ to the RM fenders

BTW--- your RM looks kick a$$ too.

Any before and after pics of your shaved side plates (side by side). I was gonna shave mine, but I couldn't wait and threw on my new backgrounds for a race 2 weeks ago
Dias374
Profile picture for user Dias374
Posts
88
Joined
10/19/2010
Location
Fort Morgan, CO US
Dias374 4/18/2012 7:13am
4/18/2012 7:13am
I have always liked gold rims on the RM. I think black would look good with the graphic scheme that you have on there, but I still think gold would look awesome too.
Digger29
Profile picture for user Digger29
Posts
1885
Joined
11/2/2011
Location
Oxford, MA US
Digger29 5/14/2012 9:25am
5/14/2012 9:25am Edited Date/Time 5/14/2012 9:31am
Finally broke down & bought a real handmade coned pipe from Scalvini. They are made by hand in Italy & they are works of art! Had many choices for the silencer from them but decided on going with the full carbon fiber one for the bling factor. These things are works of art & I raced it yesterday & they both worked awesome on the track too :-)

Digger29
Profile picture for user Digger29
Posts
1885
Joined
11/2/2011
Location
Oxford, MA US
Digger29 5/14/2012 9:26am
5/14/2012 9:26am
a better pic of the silencer.

Digger29
Profile picture for user Digger29
Posts
1885
Joined
11/2/2011
Location
Oxford, MA US
Digger29 5/14/2012 9:27am
5/14/2012 9:27am
Digger29
Profile picture for user Digger29
Posts
1885
Joined
11/2/2011
Location
Oxford, MA US
Digger29 5/14/2012 9:30am
5/14/2012 9:30am
Anyone interested in buying one of these beauties should call Pete Collins at Pete's Cycle & Sled 508 786 0888.
FGR01
Profile picture for user FGR01
Posts
6002
Joined
10/1/2006
Location
AZ US
Fantasy
1271st
FGR01 5/14/2012 1:19pm
5/14/2012 1:19pm




chump6784
Profile picture for user chump6784
Posts
1770
Joined
5/9/2011
Location
AU
chump6784 7/7/2012 11:49pm
7/7/2012 11:49pm
Finally got some pics of my bike, not a replica but anyway




Braap393
Profile picture for user Braap393
Posts
2
Joined
3/3/2013
Location
CA
Braap393 3/3/2013 9:25am
3/3/2013 9:25am
dirtbikersa wrote:
My old 125 - [IMG]http://i110.photobucket.com/albums/n93/dirtbikersa/Motocross/My%20Bikes/Rm125_2-1.jpg[/IMG]
My old 125 -
Where did you get your backrounds?
jhansen510
Profile picture for user jhansen510
Posts
2406
Joined
2/10/2009
Location
GREENFIELD, MN US
jhansen510 3/3/2013 7:17pm
3/3/2013 7:17pm
dirtbikersa wrote:
My old 125 - [IMG]http://i110.photobucket.com/albums/n93/dirtbikersa/Motocross/My%20Bikes/Rm125_2-1.jpg[/IMG]
My old 125 -
Braap393 wrote:
Where did you get your backrounds?
LOVE THIS 125!!!
Braap393
Profile picture for user Braap393
Posts
2
Joined
3/3/2013
Location
CA
Braap393 3/3/2013 8:43pm
3/3/2013 8:43pm
dirtbikersa wrote:
My old 125 - [IMG]http://i110.photobucket.com/albums/n93/dirtbikersa/Motocross/My%20Bikes/Rm125_2-1.jpg[/IMG]
My old 125 -
Where did you get those number plate backrounds?

Post a reply to: RM250 replica help