Posts
69
Joined
12/1/2009
Location
Rockaway, NJ, USA
Edited Date/Time
1/22/2012 6:11pm
I saw in the video how he lays his bike down to wash under the front fender and underneath the frame.
Is there any way to do this with out running the bike of gas? I was told it is not good to lay it down if there is still gas in it.
It seems like a waste of gas to run it dry just to lean that far over.
Thanks
Is there any way to do this with out running the bike of gas? I was told it is not good to lay it down if there is still gas in it.
It seems like a waste of gas to run it dry just to lean that far over.
Thanks
For carbed bikes, like sadi above, turn the gas off. What runs out of the carb overflow won't hurt anything and the little that might make it to the engine won't either.
You'll have a much nicer bike if you follow his example. Although, I thought I'd learn something new from the vid. I guess I did learn how to pose with my bike cleaner bottles.
Front Page of Vital.
The Shop
Luxon 4-Post Bar Mounts
$189.95 - $239.95
DeCal Works Huge Plastic Inventory of UFO and Polisport kits.
Hose off the accumulated mud, then let the bike drip dry for a while before spraying the entire bike with Shout. Wait about 15 minutes then hose down the bike. No scrubbing is required for fresh dirt stains. They just melt away.
Right now, Im in the process of trying out Slick offroad wash, which is what Pro Circuit uses. A buddy of mine got some and tried it out, and it works awesome. Im recovering from injury at the moment and not back riding yet (and my bike is clean), so I havent had a chance to try it out for myself yet. It runs $5 for a pack, which you mix with a gallon of water in a garden pump sprayer.
Post a reply to: Bike Washing question