Recent Activity
All
Thomas_Goodrich Added a reply to 2000 rm125 runs poorly.
9/29/2024 5:56pm I’m kinda leaning coil too. Builds up heat and becomes intermittent.
More »
Thomas_Goodrich Started a new thread 2000 rm125 runs poorly.
9/29/2024 5:11pm My RM 125 is running terribly. When I fire it up it runs great. I can do about two laps on the track, then it gets real boggy with no throttle response. It will rev out and pull hard about 50% of the time. The other 50% of the time it will bog and die. The carb is clean and...
This forum thread has 5 replies.
Thomas_Goodrich Started a new thread PrimalX graphics= Terrible experience
12/6/2020 7:57pm I ordered some Pastrana like graphics for my 2000 Rm 125. They came quickly. I was very excited to open them and install them. Upon opening the box, I realized the color seemed off. I put them against the bike. The color is way off. He made them the 2001 and up neon yellow, not the older yellow. I even...
This forum thread has 1 reply.
Thomas_Goodrich Added a reply to Picked up a 1997 RM250 that needs work. Looking for suggestions and direction since I am new at this.
7/23/2020 6:12pmThomas_Goodrich Added a reply to 1996 cr 250 new era mcgrath tribute… finally done!!!
4/18/2020 4:35pm I want a McGrath bike so bad.
Thomas_Goodrich Started a new thread Rm 125 power
4/9/2020 5:54pm I have a 2000 rm125. I bought the bike brand new. Sold it, and bought it back. The bike used to be all top end. It ripped pretty good. It now has a Fmf SST pipe with fmf shorty silencer, Boyesen power reeds, and has stock gearing. The bike has over 160psi of compression and runs well, it’s just gutless...
This forum thread has 5 replies.
Thomas_Goodrich Added a reply to Rm 125 power
4/9/2020 5:54pm Power valve was unhooked! Hooked it up and she rips!
Thomas_Goodrich Added a reply to Rm 125 power
4/2/2020 6:47pm I verified the correct Pv setting. I haven’t taken it apart to make sure everything is moving freely. The spark plug looks perfect.
Thomas_Goodrich Added a reply to Your "Corona" project?
3/19/2020 7:12pmThomas_Goodrich Started a new thread 2000 rm 125 build
3/14/2020 1:34pm I am the original owner of my 2000 rm 125. I raced it for a few summers in 2000-2002. I then moved from NY to Fl. I had to sell it in 2007. I now live in NY again. I found it for sale on Facebook in Daytona fl. I paypaled the guy and had it shipped to NY. I...
This forum thread has 20 replies.
Thomas_Goodrich Added a reply to 2000 rm 125 build
3/14/2020 1:34pm Well since primal x graphics screwed me and would not refund, I cut the yellow parts off. Then I installed the non yellow parts. The tank graphics were for a 250 not a 125, so no part of that fit, the number plate was for a 96-98 not a 2000. So I really had to cut them up. I really...
Thomas_Goodrich Added a reply to 2000 rm 125 build
3/11/2020 5:06am I don’t know where that cover came from. The plain black one on my bike came from parts unlimited. It was like $40
Thomas_Goodrich Added a reply to 2000 rm 125 build
3/5/2020 6:43am Now these Y2K bikes are old school. They are tough to get parts for. It was cheaper to powder coat my wheels than buy em.
Thomas_Goodrich Added a reply to 2000 rm 125 build
3/1/2020 12:34pm It looks much better in person. The photos look drab.
Thomas_Goodrich Added a reply to 2000 rm 125 build
3/1/2020 12:34pmThomas_Goodrich Added a reply to 2000 rm 125 build
3/1/2020 12:33pm I ended up powder coating stock hubs to match the frame and the wheels yellow. I did new michelins too!
Thomas_Goodrich Added a reply to PrimalX graphics= Terrible experience
2/11/2020 5:49pm Turns out I’m not the only guy he’s ripped off. I got about a dozen pm’s.
Thomas_Goodrich Added a reply to Team Peak Honda CR125
2/2/2020 3:50pm Awesome build!!
Thomas_Goodrich Added a reply to 2000 rm 125 build
1/20/2020 2:40pm I don’t know if this wheel is yellow or gold but I like it