All

Has anyone done any anodizing at home? In particular, on a set of upper fork tubes? I have a 2018 rmz450 and my forks are going to need to rebuilt soon. The outer tubes coating is badly faded and i would like to re-anodize them black, gold or a bronze. I was wondering if this could be done at home...

18-20 RMZ450 Rear Shock WP/Showa Hybrid

What SKF seal head will work with the 2009 rmz450 shock? i have skf part number SH-SHO-18-50-22-16. Do the 08-09 use the same seal head as the 2010-2017 rmz450? Getting ready to put the 09 rmz450 shaft in a wp body for a newer rmz450.

I am helping a buddy rebuild his 2004 cr125. When we pulled the top end apart i noticed it was an aftermarket piston and noticeably larger than stock. The piston i pulled out measured 58.97mm and the cylinder measured 59mm. The cylinder also appears to have a sleeve. Has anyone seen anything like this on a cr125? i thought the...

Okay, i know this has been gone over before but what options do the owners of the 18+ rmz450 have as far as shocks? -06-08 kx450f shock w/out lowering link -11-15 WP shock body with Showa shaft assembly? Just a few questions on the showa/ wp hybrid shock. What showa shaft assmebly is used? the 08+ rmz450 shock shaft? i've...

I have a yz250 and i would just like a better quality fuel. Im near Salt Lake City but frequently drive up to Ogden. Was wondering if anyone knows a convenient place to buy av gas or higher octane pump fuel.

My 2014 yz250f has a cylinder works 270 kit, full ti yoshimura system, carillo rod, updated shift stopper and water pump. This bike has amazing power for a "250". Running 13/49 gearing, if it was tuned correctly I could possibly run a 48 on the rear. Has anyone got their mapping dialed in on a big bore kit? Seems like...

Hey everyone just wanted to ask if anyone else has heard of the yz250f's snapping connecting rods? I talked to a machine shop today and they said the hp of the bikes has made an issue on the 14's and newer. The stock rod is a cast unit, but they replace them with a billet carillo rod and use an...

I've had a 2014 yz250f for about a year now. It has the cycra power flow shrouds, no backfire screen and a full yoshimura exhaust. I just checked my valves which were all in spec still. One day riding though I went down in a corner and a rock yanked my breather hose off the valve cover and I got...

What are the spring rates of the balance springs stock in a 2014 yz250f? I'm looking at some factory connection balance springs and they're 1.7kg. Just wondering if stock is stiffer or softer and how it'll affect the suspension.