Recent Activity
All
ryno19339 Started a new thread New SX style megabombs for ktm?
1/25/2019 1:30pm Has anyone tried this style of megabomb for Mx? My bike is geared to be able to pull in the low, rather than for top speed or high rpm ( I run a 14/53 on a 2018 250sxf) Would this be a good fit for a guy on a 250sxf like my self or no?
This forum thread has 0 replies.
ryno19339 Added a reply to Lets see your 16+ KTMs!
1/25/2019 1:18pm My 18 250 
More »
ryno19339 Started a new thread Ktm drilling holes in left side plate for more air
3/24/2018 6:28pm Just curious what size holes should I uses as well as what kind of mesh could I put on the inside to block dust and what not. My motors a stock motor curious to how many holes and what mesh. Sorry for incomplete sentences in class typing this quick
This forum thread has 11 replies.
ryno19339 Added a reply to Ktm drilling holes in left side plate for more air
3/22/2018 8:43am No matter what I do duct tape etc my air box gets soaked during washing. I use a filter cover each wash because it’s so bad so the holes won’t make much worse
ryno19339 Added a reply to Cone valve / traxx
8/21/2017 4:17pm Where did you find it used? Ebay? Also compared to stock how are they
ryno19339 Started a new thread Cone valve / traxx
8/21/2017 1:48pm Is it possible to get this suspensions without having too spend the 5 big ones it would cost? More or less could I get the internals and adjusters and just install them on the oem?
This forum thread has 5 replies.
ryno19339 Started a new thread Vp racing tank stickers
8/17/2017 3:33am All the guys have them at the nationals and Loretta they are like 2 inch long stickers. They go right underneath the gas cap any idea where I can get them?
This forum thread has 25 replies.
ryno19339 Added a reply to Vp racing tank stickers
8/16/2017 7:07pm Lol doin that tomorrow as for now I figured I would as vital
ryno19339 Started a new thread 16 ktm bike acting weird
7/30/2017 4:06pm H
This forum thread has 5 replies.
ryno19339 Started a new thread Clear graphic cover on factory bikes?
7/28/2017 5:32pm What is the stuff and where do I get some it's like a clear graphic cover with bumps in it Ik tld ktm uses it. Where can I get some and how much
This forum thread has 2 replies.
ryno19339 Started a new thread Info on u4.4 vs u4e
7/19/2017 9:52am So I live in Albany ny and run t4e in my stock 2016 ktm 250sxf, bike runs great never ran regular t4 so Idk if t4e is better or worse can anyone give any reports on the stuff and if u4e is even worth it if I can't get regular u4.4
This forum thread has 27 replies.
ryno19339 Added a reply to Info on u4.4 vs u4e
7/17/2017 8:59pm Really any hint as too what's new or better? And are you're motors stock or high comp or what
ryno19339 Added a reply to Info on u4.4 vs u4e
7/17/2017 8:58pm What do you ride ? Stock motors ?
ryno19339 Added a reply to Info on u4.4 vs u4e
7/17/2017 2:42pm Have you or anyone ever put a bike away over the winter with vp in it? Do you have to drain the vp out of the bike and the efi system? Or could I just switch back to pump gas for a tank or two and store it with that in it
ryno19339 Added a reply to Info on u4.4 vs u4e
7/17/2017 2:27pm I have not so far just the t4e I talked to a vp rep and he says that regular u4.4 is now available to ny so I called my local dealer and he said he is going to be calling his rep to make an order for me and I told him to call me before he orders u4e and...