Recent Activity
All
reggie426 Added a reply to yz250 engine parts compatibilty
10/9/2017 10:32pm I think from memory up to 94 cylinder will fit, 95-97 cylinders have different exhaust mounting. I have the same in the shed, 2vm bottom end with 4ew cylinder but my bottom end is a WR
More »
reggie426 Added a reply to 1991 YZ250 Build
7/4/2017 2:27am Thanks mate, but I decided to stick with the stock magenta rebuild. This has stalled a bit, I've been mucking around with a 99 KX 125 as well so I haven't really done anything to this one lately.
reggie426 Added a reply to 2002 Splitfire KX125 Build
7/4/2017 2:23am What did Electrosil sting you for the plating and cylinder? I picked up a cylinder in pretty good shape, think it's still plated
reggie426 Started a new thread 1991 YZ250 Build
7/1/2017 3:22am Hi all, new member here, joined after searching a few things and found this site. I've picked up a running 1991 YZ250 for 2 bottles of Jack Daniels, and I've decided to do a frame up rebuild as a fun project. I've always been a 4 stroke guy so this is all new territory for me. The bike has fuel...
This forum thread has 32 replies.
reggie426 Added a reply to KX 125 2000 resto
5/25/2017 2:40am I started riding in 90 so all my fond memories are of the 90's mx bikes. Side note that doesn't help at all, there's a 98 kx250 in bits on Perth Gumtree for $500 Ono
reggie426 Added a reply to KX 125 2000 resto
5/23/2017 9:05pm Think ones called 2 Stroke And 4 Stroke Bikes buy/Parts/Swap Australia Wide or something. I found my 99 KX on a Perth Facebook group and my 91 YZ by putting a wanted ad on Gumtree
reggie426 Added a reply to KX 125 2000 resto
5/23/2017 12:39am Try Facebook, there's a few moto pages where a few bargains show up.
reggie426 Added a reply to 2002 Splitfire KX125 Build
5/3/2017 4:45am Sorry, plus $36 postage 
reggie426 Added a reply to 2002 Splitfire KX125 Build
5/3/2017 3:41am Search Gumtree for bits, they come up. I scored this shock for $200 from Victoria the other week 
reggie426 Added a reply to KX 125 2000 resto
5/2/2017 2:57pm Maybe the brake line is stuffed?
reggie426 Added a reply to KX 125 2000 resto
5/2/2017 5:53am Getting clean, when I picked it up for $400 AUD it looked like it had been ridden for weeks in red mud then just put away in the shed. The bottom end seems good and there's a PC pipe and shorty with it. The shock I found on a trading website (Gumtree) from a guy on the east coast of...
reggie426 Added a reply to KX 125 2000 resto
5/2/2017 4:59am I picked up a 99 in much the same condition, missing a cylinder though. Been trying to find nice bits for it, only found a Ohlins rear shock so far. Where did you find the VHM head from, can't seem to find one anywhere. 
reggie426 Added a reply to Rags to riches 97 yz125
4/5/2017 6:02am Good luck with the build, that red frame makes my eyes bleed
reggie426 Added a reply to 97 Emig inspired KX 250
2/27/2017 11:09pm Cheers, will do. I'm thinking white plastics over the green frame on my 99 build but want to do something retro with the shroud graphics, not sure what yet
reggie426 Added a reply to 97 Emig inspired KX 250
2/24/2017 3:18pm Who was it in Aus who did your sticker kit?
reggie426 Added a reply to 1991 YZ250 Build
2/17/2017 4:57pm Bump to help you find that frame!
reggie426 Added a reply to Kx125 04 pc build
2/7/2017 5:13pm Will do I think, I picked up this '99 for $400 without a cylinder which I've sourced locally for another $300, so I'm trying to decide whether to just clean it up and rebuild it or pour some more money into it. All I've done so far is rub the frame back and paint it the correct colour. 
reggie426 Added a reply to Kx125 04 pc build
2/7/2017 4:33pm What coatings did you use on the brake parts, or are they new? Just started building a 99 kx and looking for ideas, in Aus too and anything beyond stock bits are hard to find
reggie426 Added a reply to 1991 YZ250 Build
2/4/2017 7:21pm Been awhile, don't have a lot of time to get back to this plus moved house so things got stored for a while. But, starting to put things back together. 
Got lucky with the engine, I had a '95 engine and some parts I couldn't use, advertised it and the guy just happened to have a complete engine that...
Got lucky with the engine, I had a '95 engine and some parts I couldn't use, advertised it and the guy just happened to have a complete engine that...
reggie426 Added a reply to I.D. This top triple clamp
2/2/2017 3:36pm Pro Taper for sure, had them on my '00 426