Recent Activity
All
Jrey2 Liked a reply to forum topic 2023 KTM 350sx-f decel pop
2/25/2024 9:13am
actively looking into it myself: https://www.thumpertalk.com/forums/topic/1077085-the-tps-adjustment-thr…
This forum topic has 24 replies.
colin504 Added a reply to 2023 KTM 350sx-f decel pop
2/25/2024 9:08am I am currently going through the same issue with my 24 gasgas mc350. have done fuel filter, air cage, and fmf factory 4.1 exhaust. Still popping under decel. I will look into changing the tps setting.
atrdrvr7 Liked a reply to forum topic 2023 KTM 350sx-f decel pop
2/25/2024 9:07am
My 23’ did this also. Very annoying! I bumped the tps voltage from .52 to .56. Decel pop completely gone. Less flameouts also. I think the bike comes a little to lean from the factory.
This forum topic has 24 replies.
whitechapel44 Liked a reply to forum topic 24 gg mc350 fmf factory 4.1 exhaust with mega bomb header
1/4/2024 1:00pm
nope don't need a tune, they make the pipes to work with the stock tune, experiment with and without the spark arrestor. sometimes the bikes like the back pressure the arrestor gives
This forum topic has 1 reply.
colin504 Started a new thread 24 gg mc350 fmf factory 4.1 exhaust with mega bomb header
1/3/2024 9:14am Just wondering if anyone has installed this full exhaust on their newer gasgas ktm of husky 350’s. I purchased the full kit after Christmas, and wondering if it will require a new tune or not? Won’t be running the spark arrester. *header is not in stock yet so not in pick, but it’s coming
This forum thread has 1 reply.
cwel11 Liked a reply to forum topic Should have got a 350 years ago...
12/22/2023 8:28am
Totally agree with your thoughts here. The clutch pull is a bit stiffer on the braktec but not enough to notice while riding. Braktec gets a bad wrap but they’re essentially a Brembo clone and not bad at all. The biggest pain imo is finding aftermarket levers and the bolt on factory hand guards. Hopefully that stuff comes around though.
This forum topic has 931 replies.
Rider 5280 Liked a reply to forum topic Should have got a 350 years ago...
12/22/2023 8:28am
If you end up wanting to swap to a Brembo caliper and master cylinder, I've got a new take-off set with extras (carbon fiber shield, new ARC Powerlever lever, etc.). Just an option.
This forum topic has 931 replies.
colin504 Added a reply to Should have got a 350 years ago...
12/21/2023 10:57pm Definitely not as bad as the reviews make them sound. The brembo clutch on the 22 has a very minimally lighter pull. But I can only notice it if pulling them both side by side on the stand. It’s still a very nice clutch feel on the 24, but the 22 is a slight bit easier. the brakes I almost...
colin504 Added a reply to Should have got a 350 years ago...
12/21/2023 7:43am So far I only have about 4 hours on the 24. It feels more stable at high speed, but also feels a bit more rigid. (Apparently takes 10 hours to break chassis in) the new 350 motor in the 24 is way better for sure. both are great bikes and I’ll be keeping the 22 for this whole season and...
colin504 Added a reply to Should have got a 350 years ago...
11/30/2023 12:50pm Was a Yamaha guy my whole life, they are great bikes and always treated me well, I will never have anything bad to say about the yammies. couple years ago could not get my hands on a new yz250F anywhere. So I opted to try out a 22 gasgas mc350, and absolutely fell in love. As a 170lb vet expert...
colin504 Added a reply to Braktech levers for 24 gasgas
10/6/2023 4:34pm I emailed arc and got part numbers for their braktec levers if anyone else is interested
cwtoyota Liked a reply to forum topic Braktech levers for 24 gasgas
10/6/2023 4:32pm
I added a post in that thread just now with my plans for dumping the BrakTec shit including some detailes on fitment. TLDR: eBay people have the Tusk levers in stock for some cheap gearbag spares (They were out of stock on RMATV): I purchased this pair: https://www.ebay.com/itm/314802301659 https://www.ebay.com/itm/235044614968
This forum topic has 10 replies.
cwel11 Liked a reply to forum topic Braktech levers for 24 gasgas
10/6/2023 9:08am
That’d be convenient
This forum topic has 10 replies.
FGR01 Liked a reply to forum topic Braktech levers for 24 gasgas
10/6/2023 9:08am
You do not lose fluid when you remove the slave from the cases. If the slaves are the same you should be able to swap the entire system over.
This forum topic has 10 replies.
colin504 Added a reply to Braktech levers for 24 gasgas
10/6/2023 8:31am Ya I’m going to look into swapping it all over this winter. Was hoping with the clutch I could swap everything, the master and slave cylinder all complete with hoses lines still hooked up? Or do you loose all fluid when you take it off the engine case? also not sure if the brembo caliper will bolt right into the...
cwel11 Liked a reply to forum topic Braktech levers for 24 gasgas
10/6/2023 8:18am
If it were me and I had a bike sitting there to swap it all I’d probably change everything just because it’d all be Brembo. (I’m OCD like that though 😂) The brakes would be easy because you wouldn’t even have to disconnect the lines. The clutch would be a bit worse to deal with the clutch bleeding. Side note, after the new one gets broken in update on your thoughts new gen vs old pls!
This forum topic has 10 replies.
colin504 Added a reply to Braktech levers for 24 gasgas
10/5/2023 8:11pm Thanks for the info. I currently still have my 22 gasgas 350 as well. While I don’t really notice a difference with the brakes or clutch yet, I am debating trying to swap at least the brembo clutch off the 22 onto the 24 if that is possible.
FGR01 Liked a reply to forum topic Braktech levers for 24 gasgas
10/5/2023 8:07pm
This forum topic has 10 replies.
cwel11 Liked a reply to forum topic Braktech levers for 24 gasgas
10/5/2023 8:07pm
Flo levers make them. I currently am running the shorty brake and clutch on my 23 MC350. They work fine but I’ve noticed the Braktec clutch pull is considerably harder than my ARC/Brembo setup was on my Husky. We actually now have an early 23 mc250f with the Brembo and it’s smooth as butter compared to the 350. Ordered ARC CL-122 and BR-122 to see if the levers help the issue. If not I may switch out to a Brembo. Braktec gets a bad rep because it’s “not Brembo” but honestly the brakes are just as good. Clutch pull on...
This forum topic has 10 replies.
colin504 Started a new thread Braktech levers for 24 gasgas
10/5/2023 2:26pm Just picked up a 24 mc350. Does anyone know if the levers are the same as the brembo perch? I’m looking to buy some folding levers but all the part searches bring up levers for brembo. thanks
This forum thread has 10 replies.