Recent Activity
All
Burger745 Added a reply to YZ 125 VHM Head inserts
12/12/2025 11:09am Contact VHM and give them the part number for specs
More »
Burger745 Added a reply to 2025 Yz 250t
8/23/2025 9:58am Thanks digger
digger Liked a reply to forum topic 2025 Yz 250t
8/23/2025 9:56am
A #7 slide is for sure the stock slide. MX only: Needle--N3EJ in clip #2 Pilot--45, I like using a 48 pilot with the #8 slide ideally. It just has a fuller (more torque) feeling in the lower part of the power curve, that you may want when using the PC pipe. Main---178 Power jet---40 If you are using the stock, uncut head, you don't need that much c-12, I only mix it at 1 gal of c12 to 4 gal of 93, and I'm using a 5-UP head(21cc) on my bike. The bike won't run any better with more...
This forum topic has 17 replies.
Burger745 Added a reply to 2025 Yz 250t
8/23/2025 8:55am I did confirm #7 as stock. We ride MX only. Live in Massachusetts 0-1500 sea level and dealing with Summer temperatures at this point. Going to try 50/50 mix of C-12/93 pump with 32:1 motul 800. Both bikes will have Full PC pipe and 304 silencers with V-force 4x
Burger745 Added a reply to 2025 Yz 250t
8/19/2025 9:45am No C12 , motol 800 32:1
Burger745 Added a reply to 2025 Yz 250t
8/19/2025 4:50am Going on the dyno to fine tune, just trying to confirm what slide comes stock
Falcon Liked a reply to forum topic 2025 Yz 250t
8/18/2025 4:44pm
If you get a setting that works well for you, post it up. My '24 runs pretty rich, even on MXA's recommended settings (which are, by the way, the same as stock!)
This forum topic has 17 replies.
FGR01 Liked a reply to forum topic 2025 Yz 250t
8/18/2025 4:44pm
Sock is a 7.0 Most/all of PC's jetting recommendations use the stock slide.
This forum topic has 17 replies.
Burger745 Added a reply to 2025 Yz 250t
8/18/2025 4:44pm I just bought a 25 monster edition for my son and I picked up a 26 model. The 25 sounds rich. I played with the air screw and adjusted the idle. I put a full PC exhaust on the 26 and we put just the PC silencer on the 25. Both got V-force 4x reed cage. If you look at...
Burger745 Started a new thread 2025 Yz 250t
8/17/2025 8:41am Anyone know what the stock slide number is on PWK carb. Pro Circuit suggests 7.0 and I’m wondering what stock is to see if it’s leaner/richer
This forum thread has 17 replies.
crc245 Liked a reply to forum topic 2025 KX 450/250
7/19/2025 4:40pm
Same
This forum topic has 2 replies.
Burger745 Started a new thread 2025 KX 450/250
7/18/2025 8:32am Are footpegs the same/interchangeable for both models? RM has footpegs listed for 250 but not the 450. I believe they are the same but not sure? Anyone know if they are the same?
This forum thread has 2 replies.
Burger745 Started a new thread 2025 KX 450 front brake line
2/25/2025 3:02pm I just picked this bike up and can’t stand the front brake line routing on it. Does anyone sell a CR style line that goes behind the number plate? Not having any luck finding one?
This forum thread has 1 reply.
Burger745 Started a new thread Daytona SX tickets
2/7/2025 8:11pm 4 Tickets section 357 row 4. Awesome seats. I bought them before they were released to the general public. Can’t make it this year. $400
This forum thread has 1 reply.
Burger745 Started a new thread 2024 YZ 125
12/28/2024 3:46pm “GOING TO TRY AT ROCK BOTTOM 6K FIRM” 2024 YZ 125 Low hours “35” like new. Factory fatty pipe/shorty silencer, ODI Podium bars, G2 throttle, acerbis frame guards and full skid plate, BA suspension, VHM Head with custom dome and MX pump gas dome, VHM Ignition, V-force 4R reed cage, Dt1 air filter, ngk iridium plug, Dunlop 34’s, GYTR jet...
This forum thread has 1 reply.
Burger745 Started a new thread 2023+ Austrian bike MX Tech
12/27/2024 10:50am Mx Tech blackjack forks and national shock. Bought on 6/24 for my sons 2023 FC250. Very little use “15 hours max”. He picked up a new YZ 125 and rode that and the 4-stroke collected dust. Paid $5k. Looking to get some of my money back. Setup for 145-160lb “B” MX. Also have vortex I bought new for sale
This forum thread has 1 reply.
Langhammx Liked a reply to forum topic 2023+ Austrian bike MX Tech
12/27/2024 10:45am
Well at least they didn’t overcharge you on the shipping.
This forum topic has 1 reply.
Burger745 Added a reply to New YZ 250 Build (I Need Therapy)
12/5/2024 6:13am Curious, what did you pay for the forks? I have a 22 I’m building and was thinking of ditching the stock forks.
Burger745 Added a reply to 2022 YZ 250 Brake upgrades
10/25/2024 4:52pm Sorry this is months later, finally getting around to getting this done. I have priced out master and steel braided line. I looked through schematics on Yamaha and Honda. What are the lower part numbers for? Just wanted to get everything needed. Thx
Burger745 Added a reply to Piston change hours YZ 125
10/1/2024 4:57pm New head with special order race fuel dome, top end and VHM CDI installed. Bike should rip!