Recent Activity
All
BIGSHANEADAMS Started a new thread Kickstand cutting
12/14/2020 4:35pm I have a 2020 crf250f that I had lowered by Factory Connection 1” and have a pro billet kickstand that is now to long. Does anyone know how much I get it, do I cut it 1 in. Or because of the angle do I get it less? Thank you all in advance for any advice.
This forum thread has 8 replies.
BIGSHANEADAMS Added a reply to 2018 CRF 250 R Water Pump Help
9/5/2020 1:41pm
harescrambled Liked a reply to forum topic 2018 CRF 250 R Water Pump Help
9/5/2020 1:41pm
Those engines use a mechanical water pump seal. You have to press the shaft out. It will not come out by hand. Then when you reassemble it, you have to install a new mechanical seal, which must be pressed on. (Honda recommends a new water pump shaft as well). You're basically looking at replacing everything except the impeller
This forum topic has 6 replies.
BIGSHANEADAMS Added a reply to 2018 CRF 250 R Water Pump Help
9/5/2020 9:06am I got it kinda figured out, I run a Boyseen water pump and Engine Ice, along with Maxima Extra 4 motor oil now. It doesn’t over heat except in tight rough riding, but at the track it doesn’t over heat at all. I do not let it run very long before riding it and don’t let it idle on the...
BIGSHANEADAMS Started a new thread Too Short for a 2019 yz250f?
4/30/2020 9:51am I have a 2018 CRF250r and I’m not really happy Witt the reliability. I’m 5’4” is a 2019 yz250f going to be way to tall for me?
This forum thread has 17 replies.
FIREfish148 Liked a reply to forum topic Chest/back protector for short rider?
3/10/2020 10:14am
I used to run a Thor’s previous version of this under my jersey. I was about 5’5” when I started running it. Fit perfect. 
This forum topic has 4 replies.
hubbardmx50 Liked a reply to forum topic Chest/back protector for short rider?
3/10/2020 10:14am
The Troy Lee 5900 is really good and super easy to adjust with the screws to make longer or shorter. Troy Lee sizing chart says the Medium fits anyone 5-5'8 https://www.rockymountainatvmc.com/riding-gear/troy-lee-bg-5900-roost-d…
This forum topic has 4 replies.
StellARrr Liked a reply to forum topic Chest/back protector for short rider?
3/10/2020 10:14am
I'm 5'3 and adult chest protectors are too long for my back. I like the Fly Junior Lite Youth Roost Guard (L/XL) that was made by Leatt. They don't make it anymore, but it looks like it might be available on a couple closeout sites. [[The website says the L/XL is for chest circumference 28-31 inches and riders 4'9"-5'1" tall but the label/booklet that came with mine said it was for up to 5'3".]] Leatt youth 4.5 chest protector looks like the same chest protector...so it should fit the same way. (I don't wear it under my jersey though because...
This forum topic has 4 replies.
Radical Liked a reply to forum topic Chest/back protector for short rider?
3/10/2020 10:14am
I'm 5'7" and this one fits well. It's very comfortable, and doesn't restrict movement. The back is longer than the front. https://www.rockymountainatvmc.com/riding-gear/troy-lee-bg-5955-roost-d…
This forum topic has 4 replies.
BIGSHANEADAMS Started a new thread Chest/back protector for short rider?
3/10/2020 1:06am I’m 5’2” y’all and I’m looking at an Alpinestars A1 but I believe it will hang to low, any ideas on a quality under jersey chest protector with back protection as well. Thank everyone in advance for your time.
This forum thread has 4 replies.
BIGSHANEADAMS Started a new thread 2019 CRF250R Handguards
12/6/2019 6:18pm Anyone mount any handguards to a 2018 or newer cRF250R? There does’t look like there is any room with the mode selector and kill button. I’m only looking to mount them for a few rides a year and don’t want/need full bark buster style wrap around handguards. Anyone mounting anything would be helpful. Thank you in advance.
This forum thread has 8 replies.
BIGSHANEADAMS Added a reply to 2019 CRF250R Handguards
12/6/2019 6:18pm Thank you I believe I will try those
Xeno Liked a reply to forum topic 2019 CRF250R Handguards
12/6/2019 6:14pm
We sell a billet start button that mounts to the back of the brake master cylinder. This makes room for hand guards. It's completely plug-n-play. Connects to the OEM wire harness. 
https://www.jcrspeedshop.com/products/billet-start-button?variant=19763715997783
https://www.jcrspeedshop.com/products/billet-start-button?variant=19763715997783
This forum topic has 8 replies.
theToothPerry Liked a reply to forum topic 2019 CRF250R Handguards
12/6/2019 6:13pm
I run these on my RX but i find my front brake being applied in the worst of times from bushes. Any fix for that?
This forum topic has 8 replies.
Xeno Liked a reply to forum topic 2019 CRF250R Handguards
12/6/2019 6:13pm
We've been using the Acerbis X-Ultimate Handguards because they mount farther toward the center of the handlebar. 
This forum topic has 8 replies.
woodsgoon Liked a reply to forum topic 2019 CRF250R Handguards
12/6/2019 6:13pm
none of us (8) have had an issue getting handguards to mount for woods racing. or barkbusters
This forum topic has 8 replies.
BIGSHANEADAMS Added a reply to 2019 CRF250R Handguards
12/6/2019 6:11pm Thank yoi
BIGSHANEADAMS Added a reply to 2019 CRF250R Handguards
12/6/2019 4:25pm Thank you, I’m hurting from room on the Mode selector side as well, do you know any handguards I can use? I’m not looking for any full wrap around handguards more like the cycra rebound or Acerbis Unico
BIGSHANEADAMS Added a reply to 2018 CRF 250 R Water Pump Help
11/23/2019 9:31pm Let me ask a quick question please, to remove the impeller is it lefty loosey or reverse threaded. I can’t find this information anywhere. Thank you in adance
BIGSHANEADAMS Started a new thread 2019 CRF250R water pump impeller removal
11/23/2019 7:13am how do I remove the water pump impeller, is it normal threaded or reverse threaded? What do I torque it back to when ready to bottom it back up? Thanks in advance
This forum thread has 1 reply.