Recent Activity
All
FGR01 Liked a reply to forum topic 05 RMZ 250/ FCR
4/25/2022 2:25am
Remove the fuel screw and make sure the o-ring from the old fuel screw is not still up in the cavity. Fish it out with safety wire if it is. Blow out the fuel screw circuit with carb cleaner and compressed air. Put a little anti-seize on the fuel screw threads so it's easy to adjust. Clean or replace the pilot jet and blow that circuit out as well. The fact that you're needing large fuel screw openings suggests the pilot might be clogged. Remove the hot start plunger, clean it all out and put a light coat of grease...
This forum topic has 5 replies.
BBLMIN Started a new thread 05 RMZ 250/ FCR
4/24/2022 8:47pm Just finished up an 05 RMZ with fcr carb. Bike idles well, runs fantastic up high but has a terrible sputter from idle to 1/2 throttle. Cleans up really well above 1/2. I ordered a new air fuel screw with new springs and o rings, at any thing between seated to 2.5 out still runs poorly off idle. My first...
This forum thread has 5 replies.
matze Liked a reply to forum topic Exactly how sour was Craig?
3/27/2022 12:23pm
he needs some milk
This forum topic has 108 replies.
BBLMIN Added a reply to Let’s Talk About The Greatest Bike Graphics Of All Time ? Show Us Yours ?
3/26/2022 10:35pm
BBLMIN Added a reply to Has anyone ever built a bike from scratch?
3/23/2022 10:28pm Just( mostly) finished this 05 up yesterday; Still needs exhaust and tires but literally eBay’d and vital’d my way through it. I usually build a bike top to bottom every 2 years or so. Have an 05 kx 125, 06/12 KTM 200 and 04 CR 250 all built out of a box of parts, missing a bunch of stuff and...
Hugh_Wilson Liked a reply to forum topic 98 PC CARMICHAEL BUILD
3/16/2022 10:33pm
Got the motor in tonight, Still got some engine hangers, plumbing and other bits, Taken 5 years to get here. 
This forum topic has 52 replies.
GoggleFiend904 Liked a reply to forum topic 2000 KX 250 pro circuit berg racing
3/16/2022 10:14pm
The master cylinders came out pretty good. Tomorrow I’ll be putting new hoses on the carb and putting the stock air box on. I plan on riding this bike so I don’t want to risk damaging it. I’m trying to find carbon fiber frame guards that are currently still made, It looked like a place in Italy made them, but I haven’t received a response from them. I would also like to get some PC triple clamps at some point 
This forum topic has 35 replies.
BBLMIN Added a reply to Favorite MX Helmets
3/16/2022 9:57pm
BBLMIN Started a new thread WTB 04-06 RMZ 250 goodies
12/23/2021 7:44am Picking up an RMZ project. Seeing if anyone has some goodies stashed away?
This forum thread has 3 replies.