Upgrade to enjoy this feature!
Vital MX fantasy is free to play, but Premium users receive great benefits. Premium benefits include:
- View and download rider stats
- Pick trends
- Create a private league
- And more!
Only $10 for all 2026 SX, MX, and SMX series.
CRMX105 7hrs when it happened. & only has not started correctly 1 time My friends was less that 1 hour.
gscx , mine will ping a bit down low in a tight corner. I'm glad you mentioned the in gear rpm changing .I had forgot to mention it.
I raise idle but compromised & set idle bit lower than I would like in neutral. so its not so high in gear otherwise. I haven't had stalls on track even with lower idle.
5.2 hr on mine. Haven't had the decomp issue so far. Stalling issue has improved now that bike has more time on it. Think mapping could be cleaner. Seems like map 2 runs the cleanest.
Are you talking about the big 14mm sealing washer on the bottom or the smaller 6mm one on the left side cover?
Funny you mention the idle increase. My ‘27 Yamaha also increases idle speed when in gear and also has almost no engine braking. This was the first time I noticed a bike doing that. Pretty cool honestly. I’m not a fan of engine braking.
The Shop
Luxon 4-Post Bar Mounts
$189.95 - $239.95
DeCal Works Huge Plastic Inventory of UFO and Polisport kits.
Good thing someone figured out to bump the bike past the compression stroke and retry starting. Lol......
Smaller 6mm!
Partzilla says they have it in stock: https://www.partzilla.com/product/honda/90404-HW1-670
I've used these bulk ones from Amazon for years with success. Not sure the outer diameter of the Honda OEM one, 10mm or 12mm. Looks 12mm in pictures. Measure your current one. https://www.amazon.com/uxcell-Copper-Washer-Sealing-Fastener/dp/B01LXD5PYF/ref=sr_1_21?th=1
Looks like they also have the correct size 14mm one 14x20x1mm
No, let’s go ahead and hook jumper cables to a battery that’s not meant for jumper cables 🤦🏻♂️🤦🏻♂️. People panicked for no reason. Good call on your part
The idle settings do need some tweaking and I believe it’s the culprit for the decompression issue. It believe the idle is way to low when it’s cold, therefore the decompression system is engaging when it shouldn’t. That causes the bike to stop between TDC and there’s to much compression for the starter to turn the bike over. If you rotate the engine around and get the bike off TDC, then everything works like it’s supposed to. I’ve been running my idle high from day one with no stalling or starting issues. I have 8 hours on the bike now. Honda needs to adjust the ECU so that the bike idles better. Anyway, enjoy the bike! 👍
Pit Row
Post a reply to: 2027 CRF450R