New 2023 YZ450F

Duncster316 4/25/2023 8:21am
4/25/2023 8:21am

I’ll show you what I did on my tall seat just for an idea. I felt like the foam was a little too tall for me and was very rounded, creating a narrow top. I shaved and sanded it down about a half inch. This setup is approximately a half inch taller than stock and has way more gripping area on the sides than the stock seat.19428A1B-33D2-4C08-BA4A-9D8CF60F56A3

 

10
dirtyrat23
Profile picture for user dirtyrat23
Posts
25
Joined
2/18/2022
Location
Escondido, CA, USA
dirtyrat23 4/25/2023 9:23am
4/25/2023 9:23am
gormleyflyer2002 wrote:

Anyone got a picture of the tall GUTS seat ?? They don't show on the web site ??

Brandon Miller wrote:
 

IMG 4011

 

What suspension are you running?

Brandon Miller 4/25/2023 11:59am
4/25/2023 11:59am
gormleyflyer2002 wrote:

Anyone got a picture of the tall GUTS seat ?? They don't show on the web site ??

Brandon Miller wrote:
 

IMG 4011

 

dirtyrat23 wrote:

What suspension are you running?

Coatings and set up by 405 Mods in Norman, Ok.

VPG43
Profile picture for user VPG43
Posts
59
Joined
10/16/2020
Location
NL
VPG43 4/25/2023 12:22pm
4/25/2023 12:22pm

Just got the Twin Air Powerflow kit. Seals a lot better. Very noticeable when you mount just the cage without airfilter. So it’s recommended in my point of view!

4

The Shop

See All »
Beaz824
Profile picture for user Beaz824
Posts
29
Joined
6/25/2017
Location
Minooka, IL, USA
Beaz824 4/26/2023 4:24am
4/26/2023 4:24am
VPG43 wrote:
Just got the Twin Air Powerflow kit. Seals a lot better. Very noticeable when you mount just the cage without airfilter. So it’s recommended in my...

Just got the Twin Air Powerflow kit. Seals a lot better. Very noticeable when you mount just the cage without airfilter. So it’s recommended in my point of view!

Does it use the same filters? I recall the previous model on my 20 I had to but new filters w the kit

1
DB97
Profile picture for user DB97
Posts
1181
Joined
7/28/2016
Location
Orlando, FL, USA
DB97 4/26/2023 8:50am
4/26/2023 8:50am
VPG43 wrote:
Just got the Twin Air Powerflow kit. Seals a lot better. Very noticeable when you mount just the cage without airfilter. So it’s recommended in my...

Just got the Twin Air Powerflow kit. Seals a lot better. Very noticeable when you mount just the cage without airfilter. So it’s recommended in my point of view!

Beaz824 wrote:

Does it use the same filters? I recall the previous model on my 20 I had to but new filters w the kit

No it’s a different filter. Flame retardant ones.

VPG43
Profile picture for user VPG43
Posts
59
Joined
10/16/2020
Location
NL
VPG43 4/26/2023 9:55am
4/26/2023 9:55am
VPG43 wrote:
Just got the Twin Air Powerflow kit. Seals a lot better. Very noticeable when you mount just the cage without airfilter. So it’s recommended in my...

Just got the Twin Air Powerflow kit. Seals a lot better. Very noticeable when you mount just the cage without airfilter. So it’s recommended in my point of view!

Beaz824 wrote:

Does it use the same filters? I recall the previous model on my 20 I had to but new filters w the kit

DB97 wrote:

No it’s a different filter. Flame retardant ones.

Model is the same, but flame retardant inside, yes. But I’ve used standard air filters for years without any problems. So I will use the TwinAir cage with the standard filters.

1
1
GPrider
Profile picture for user GPrider
Posts
771
Joined
4/10/2014
Location
La Mesa, CA, USA
GPrider 4/26/2023 10:48am
4/26/2023 10:48am

anyone find aftermarket plastic for sale yet? Need to ditch this black stuff for blue.

1
DB97
Profile picture for user DB97
Posts
1181
Joined
7/28/2016
Location
Orlando, FL, USA
DB97 4/26/2023 11:28am
4/26/2023 11:28am
GPrider wrote:

anyone find aftermarket plastic for sale yet? Need to ditch this black stuff for blue.

Polisport has blue on eBay. 

1
DB97
Profile picture for user DB97
Posts
1181
Joined
7/28/2016
Location
Orlando, FL, USA
DB97 4/26/2023 4:45pm
4/26/2023 4:45pm
VPG43 wrote:
Model is the same, but flame retardant inside, yes. But I’ve used standard air filters for years without any problems. So I will use the TwinAir...

Model is the same, but flame retardant inside, yes. But I’ve used standard air filters for years without any problems. So I will use the TwinAir cage with the standard filters.

Do you use the Gp cover too? Twin air USA said we can’t get it, but it’s for sale in the Netherlands.. I want one for the sand here in Florida. 

VPG43
Profile picture for user VPG43
Posts
59
Joined
10/16/2020
Location
NL
VPG43 4/27/2023 11:16am
4/27/2023 11:16am
VPG43 wrote:
Model is the same, but flame retardant inside, yes. But I’ve used standard air filters for years without any problems. So I will use the TwinAir...

Model is the same, but flame retardant inside, yes. But I’ve used standard air filters for years without any problems. So I will use the TwinAir cage with the standard filters.

DB97 wrote:
Do you use the Gp cover too? Twin air USA said we can’t get it, but it’s for sale in the Netherlands.. I want one for...

Do you use the Gp cover too? Twin air USA said we can’t get it, but it’s for sale in the Netherlands.. I want one for the sand here in Florida. 

No I don’t use it. Maybe a universal one will work as well.

Burnett84
Profile picture for user Burnett84
Posts
29
Joined
8/29/2019
Location
Strasburg, OH, USA
Burnett84 4/29/2023 7:08am
4/29/2023 7:08am

Does anyone have a photo of the DT1 air flow kit. 

philip_DJ 4/29/2023 7:21am
4/29/2023 7:21am Edited Date/Time 4/29/2023 7:23am
Beaz824 wrote:

Does it use the same filters? I recall the previous model on my 20 I had to but new filters w the kit

DB97 wrote:

No it’s a different filter. Flame retardant ones.

VPG43 wrote:
Model is the same, but flame retardant inside, yes. But I’ve used standard air filters for years without any problems. So I will use the TwinAir...

Model is the same, but flame retardant inside, yes. But I’ve used standard air filters for years without any problems. So I will use the TwinAir cage with the standard filters.

The powerflow kit filter is a lot lower at the backside of the filter for better airflow. so it's not the same filter.

VPG43
Profile picture for user VPG43
Posts
59
Joined
10/16/2020
Location
NL
VPG43 4/30/2023 9:56am
4/30/2023 9:56am
DB97 wrote:

No it’s a different filter. Flame retardant ones.

VPG43 wrote:
Model is the same, but flame retardant inside, yes. But I’ve used standard air filters for years without any problems. So I will use the TwinAir...

Model is the same, but flame retardant inside, yes. But I’ve used standard air filters for years without any problems. So I will use the TwinAir cage with the standard filters.

philip_DJ wrote:

The powerflow kit filter is a lot lower at the backside of the filter for better airflow. so it's not the same filter.

Didn’t notice that, but oem style filters will fit.

rocketsocks26 4/30/2023 12:34pm
4/30/2023 12:34pm
DB97 wrote:
Look what finally showed up at my dealer.   

Look what finally showed up at my dealer. E460A458-FB2A-43FC-8D35-6EC4299AE5D9.jpeg?VersionId=cKqK3bxTNxKSLwI8

 

What’s the part # for this cover?

DB97
Profile picture for user DB97
Posts
1181
Joined
7/28/2016
Location
Orlando, FL, USA
DB97 4/30/2023 12:45pm
4/30/2023 12:45pm
rocketsocks26 wrote:

What’s the part # for this cover?

IMG 0985

 

tek14
Profile picture for user tek14
Posts
4927
Joined
1/26/2014
Location
Vantaa, FI
tek14 4/30/2023 1:12pm
4/30/2023 1:12pm Edited Date/Time 4/30/2023 1:19pm

IMG 7648.jpeg?VersionId=b4GwPOWtSo5Lj5KY6FA

 Been testing offset with this Nuaxle. So far just two different tracks but 23-24 seems to work great rough sandier tracks. Less busy off throttle coming into braking bumbs but seems to kill some turning so went back to 22 on harder tighter track. 

Next plan is draw and get made tighter plate for clutch spring. Seems just hard to get parts here in EU so why not make some.

4

Pit Row

See All »
GPrider
Profile picture for user GPrider
Posts
771
Joined
4/10/2014
Location
La Mesa, CA, USA
GPrider 5/1/2023 7:53am
5/1/2023 7:53am Edited Date/Time 5/1/2023 7:55am
tek14 wrote:
 Been testing offset with this Nuaxle. So far just two different tracks but 23-24 seems to work great rough sandier tracks. Less busy off throttle coming...

IMG 7648.jpeg?VersionId=b4GwPOWtSo5Lj5KY6FA

 Been testing offset with this Nuaxle. So far just two different tracks but 23-24 seems to work great rough sandier tracks. Less busy off throttle coming into braking bumbs but seems to kill some turning so went back to 22 on harder tighter track. 

Next plan is draw and get made tighter plate for clutch spring. Seems just hard to get parts here in EU so why not make some.

this is interesting, do you have a website for Nuaxle? I did a quick search and cant find anything. Would definitely be interested in testing one. Perfect for my type of riding

DB97
Profile picture for user DB97
Posts
1181
Joined
7/28/2016
Location
Orlando, FL, USA
DB97 5/1/2023 8:30am
5/1/2023 8:30am
GPrider wrote:
this is interesting, do you have a website for Nuaxle? I did a quick search and cant find anything. Would definitely be interested in testing one...

this is interesting, do you have a website for Nuaxle? I did a quick search and cant find anything. Would definitely be interested in testing one. Perfect for my type of riding

https://www.keeferinctesting.com/nuaxle-adjustable-offset-axle/

2
GPrider
Profile picture for user GPrider
Posts
771
Joined
4/10/2014
Location
La Mesa, CA, USA
GPrider 5/1/2023 8:34am
5/1/2023 8:34am
GPrider wrote:
this is interesting, do you have a website for Nuaxle? I did a quick search and cant find anything. Would definitely be interested in testing one...

this is interesting, do you have a website for Nuaxle? I did a quick search and cant find anything. Would definitely be interested in testing one. Perfect for my type of riding

DB97 wrote:

https://www.keeferinctesting.com/nuaxle-adjustable-offset-axle/

thank you!!!

1
JB22
Profile picture for user JB22
Posts
5
Joined
1/3/2023
Location
AUGUSTA, WV, USA
JB22 5/1/2023 4:53pm
5/1/2023 4:53pm

2023 YZ450F Rekluse Clutch cover for sale. Installed on bike for photos and taken right off. $160 shippedA09F099D-A5B6-4C11-B5BE-E2D81D049413.jpeg?VersionId=pMohQ2zSsu bKV0D10zG4ga

 

rocketsocks26 5/2/2023 1:33am
5/2/2023 1:33am
JB22 wrote:
2023 YZ450F Rekluse Clutch cover for sale. Installed on bike for photos and taken right off. $160 shipped  

2023 YZ450F Rekluse Clutch cover for sale. Installed on bike for photos and taken right off. $160 shippedA09F099D-A5B6-4C11-B5BE-E2D81D049413.jpeg?VersionId=pMohQ2zSsu bKV0D10zG4ga

 

U wanna sell the ignition cover too? 

JB22
Profile picture for user JB22
Posts
5
Joined
1/3/2023
Location
AUGUSTA, WV, USA
JB22 5/2/2023 4:55am
5/2/2023 4:55am
JB22 wrote:
2023 YZ450F Rekluse Clutch cover for sale. Installed on bike for photos and taken right off. $160 shipped  

2023 YZ450F Rekluse Clutch cover for sale. Installed on bike for photos and taken right off. $160 shippedA09F099D-A5B6-4C11-B5BE-E2D81D049413.jpeg?VersionId=pMohQ2zSsu bKV0D10zG4ga

 

rocketsocks26 wrote:

U wanna sell the ignition cover too? 

Ignition cover already sold

crmx105
Profile picture for user crmx105
Posts
655
Joined
5/7/2016
Location
Dunnellon, FL, USA
crmx105 5/2/2023 8:32am
5/2/2023 8:32am
fpandjic wrote:

Anyone bought this and can share more pics/information about it? https://mxfilters.com/Yamaha-Aluminum-Air-Flow-Kit-includes-Filter_p_97…

The one in the pic looks like its for 18-22. 23 completely different and reason why the new Twin Air power flow isn't much different than stock.

DB97
Profile picture for user DB97
Posts
1181
Joined
7/28/2016
Location
Orlando, FL, USA
DB97 5/2/2023 2:21pm
5/2/2023 2:21pm

I finally got the twin air Powerflow. The Powerflow filter looks to have more volume and it seals a lot better. Standard twin air filter for comparison in size. IMG 1005.jpeg?VersionId=fVUVDfDSpCWkea.pJaVbL

 IMG 1006

 IMG 1007

 IMG 1008.jpeg?VersionId=A3Ovp3vnGQadlCnkstWdQ3LWU

 

4
Crash82
Profile picture for user Crash82
Posts
9020
Joined
9/16/2006
Location
MONTGOMERY, AL, USA
Crash82 5/3/2023 12:33pm
5/3/2023 12:33pm
DB97 wrote:
I finally got the twin air Powerflow. The Powerflow filter looks to have more volume and it seals a lot better. Standard twin air filter for...

I finally got the twin air Powerflow. The Powerflow filter looks to have more volume and it seals a lot better. Standard twin air filter for comparison in size. IMG 1005.jpeg?VersionId=fVUVDfDSpCWkea.pJaVbL

 IMG 1006

 IMG 1007

 IMG 1008.jpeg?VersionId=A3Ovp3vnGQadlCnkstWdQ3LWU

 

Thanks for the pics. First time I have seen one how much did it set you back? 

DB97
Profile picture for user DB97
Posts
1181
Joined
7/28/2016
Location
Orlando, FL, USA
DB97 5/3/2023 2:31pm
5/3/2023 2:31pm
Crash82 wrote:

Thanks for the pics. First time I have seen one how much did it set you back? 

$250 plus shipping. 

dirtyrat23
Profile picture for user dirtyrat23
Posts
25
Joined
2/18/2022
Location
Escondido, CA, USA
dirtyrat23 5/4/2023 10:36am
5/4/2023 10:36am

Do we think there will be any changes for 2024? Or we just expecting some BNGs

Post a reply to: New 2023 YZ450F