Upgrade to enjoy this feature!
Vital MX fantasy is free to play, but Premium users receive great benefits. Premium benefits include:
- View and download rider stats
- Pick trends
- Create a private league
- And more!
Only $10 for all 2026 SX, MX, and SMX series.
The Shop
DeCal Works Huge Plastic Inventory of UFO and Polisport kits.
Luxon 4-Post Bar Mounts
$189.95 - $239.95
1. The drd exhaust I have was rubbing the shock spring. I measured and it is indeed “thicker” in the mid pipe section. Switched back to the oem pig.
2. I had my break pedal hanging(rookie mistake) while I had my suspension off being serviced. Rear break had a leak when I hooked everything back up. I flipped the washers around on the rear break as I didn’t see any obvious cracks or leaks. I bled the breaks and it tightened up. We shall see if this fixed whatever the problem was. Appeared to be leaking by the swing arm and not by the caliper.
I am looking for the 22' or '23 specifically for the graphics, I have my OEM '21 shrouds and some shrouds with aftermarket graphics, but something about these 22/23' OEM graphics speak to me and I want them.
Thanks again.
I tried a ton of aftermarket stuff and only thing I really like over stock is a tall seat, level link, and good foot pegs and bars. I tried a full pc exhaust and a drd exhaust and prefer the power delivery of the stock. I just hate the look.
Pit Row
I'm loving the acerbis one :-) easy and straight forward to install :-) Hardly feel it riding it and actually on my 250 it gives the front more stable and planted feeling :-) Always fuel it up when I can :-) Should give you around 180 k range :-) on my 250 ...
for sale, 400$ including postage. Payment via PayPal.
I also have carbon fibre engine hangers for $100.
They both work a beauty on rough tracks. No more vibrations and better handling.
Only selling together as I have to post the items from Italy, so the shipping for me is quite expensive.
My problems with it:
1) I had to service a bit too often the forks
2) at 110 hrs I had to service the top/bottom ends
3) the steering head needs to be greased often. I had to change the bearings twice.
The chain roller is not an issue if you use Chinese units as they are much harder than the stock ones. The slider will not wear out if you use an extra tooth.
Post a reply to: Let's see/review those 2019 kx450s