Re anodizing the logo on the 84 CR250RE

retrofun
Profile picture for user retrofun
Posts
148
Joined
11/25/2010
Location
Maple ridge, CA
retrofun
Edited Date/Time 3/1/2021 1:00pm
Figured I would ask here as the FB groups haven’t been much help in this situation.

I’m building a 84 CR250RE as a display piece for my personal collection. I’ve spent a lot tracking down as many nos parts as I can, however I cannot find a nos swingarm. I know there are still a few left out there, but finding one has become a pain.

My question is, can anyone recommend an anodizing place that can replicate the original logo?

I thought I had a lead out in the Netherlands.. but the guy I was dealing with turned out to be a fuckin idiot.

So any advice would be appreciated. Or a lead to a nos one...

Thanks.
1
|
TTperra
Profile picture for user TTperra
Posts
311
Joined
9/15/2015
Location
SE
TTperra 2/22/2021 10:00pm
2/22/2021 10:00pm
Is not the logo a sticker?
1
retrofun
Profile picture for user retrofun
Posts
148
Joined
11/25/2010
Location
Maple ridge, CA
retrofun 2/24/2021 10:00pm
2/24/2021 10:00pm Edited Date/Time 2/25/2021 9:09pm
Thanks, I’m not looking for a decal. The original was anodized into the swingarm.
1
mxracer666
Profile picture for user mxracer666
Posts
791
Joined
10/28/2010
Location
NE Iowa, IA, USA
mxracer666 2/24/2021 11:04pm
2/24/2021 11:04pm
retrofun wrote:
Thanks, I’m not looking for a decal. The original was anodized into the swingarm.
(swing arm)
1

The Shop

See All »
retrofun
Profile picture for user retrofun
Posts
148
Joined
11/25/2010
Location
Maple ridge, CA
retrofun 2/25/2021 9:09pm
2/25/2021 9:09pm Edited Date/Time 2/25/2021 9:10pm
retrofun wrote:
Thanks, I’m not looking for a decal. The original was anodized into the swingarm.
mxracer666 wrote:
(swing arm)
Whoops, did not notice that.. it was pretty late when I replied.. it was a long day haha
StevieD113 2/27/2021 4:35am
2/27/2021 4:35am
Honda just used decals, over bare alloy. They never anodised the decals/logos in.

To restore have them vapour blasted, then use scotch bright pads to get the original "brushed" finish. then apply the decal.


1
Kidkawie
Profile picture for user Kidkawie
Posts
1193
Joined
8/31/2012
Location
ქუთაისი, GE
Kidkawie 2/27/2021 7:14pm
2/27/2021 7:14pm
Dont think you can even anodize a logo from the process.
1
AHRMA361 2/27/2021 7:40pm
2/27/2021 7:40pm
Pretty sure the OP is correct. I owned one way back then.

It was not a decal. Don't know if it was anodized but it was embedded in the swing arm.

It said PRO LINK 250R in red.

lostboy819 2/28/2021 11:04am
2/28/2021 11:04am Edited Date/Time 2/28/2021 11:07am
Honda had it listed as a emblem even though its been discontinued for years. It may or may not come on the swing arm if you find a new OEM one.On the 84 It said "250R" and on other years like 1985 it said "Prolink" but they were a separate part number so they wee replaceable so doubt they were anodized. The one in the pic said Prolink but for the specific year it would be just like what was on the bike, makes no difference because they have been long discontinued. I also know that they were expensive and they held up really well so not sure what they were made of, could have been clear coated on the swing arm but they were durable what ever they made them out of.

https://www.hondapartsnation.com/oemparts/a/hon/506bdb84f870023420a27aa…
quicken
Profile picture for user quicken
Posts
250
Joined
3/17/2013
Location
Rhinelander, WI, USA
quicken 2/28/2021 12:58pm
2/28/2021 12:58pm Edited Date/Time 2/28/2021 1:14pm
It's not a traditional decal.... anodized or some type of treatment in the surface


Stevie D, do you have any linkages for this model in stock?








3
retrofun
Profile picture for user retrofun
Posts
148
Joined
11/25/2010
Location
Maple ridge, CA
retrofun 2/28/2021 2:20pm
2/28/2021 2:20pm Edited Date/Time 2/28/2021 2:21pm
Yep as quicken shows in his pic the 84 was not a decal. I’m thinking maybe it was silk screened on then clear anodized.

It’s definitely not easy to remove.
lostboy819 2/28/2021 5:25pm
2/28/2021 5:25pm
They put a clear protective coat on the swingarm that might be why it looks anodized.
retrofun
Profile picture for user retrofun
Posts
148
Joined
11/25/2010
Location
Maple ridge, CA
retrofun 2/28/2021 7:56pm
2/28/2021 7:56pm
Pretty sure the swingarm were clear anodized from the factory same as the fork lowers.

As for the logo it’s definitely not a decal.. if it was screen printed the paint used is translucent as you can see the the aluminum brushed marks through it.
MXVet261
Profile picture for user MXVet261
Posts
743
Joined
4/1/2008
Location
Valley City, OH, USA
MXVet261 3/1/2021 1:00pm
3/1/2021 1:00pm
Suzuki did the same for the "Full Floater" logo from 83-85. Printed directly on the swingarm, not a sticker.
retrofun
Profile picture for user retrofun
Posts
148
Joined
11/25/2010
Location
Maple ridge, CA
retrofun 3/1/2021 6:27pm
3/1/2021 6:27pm
MXVet261 wrote:
Suzuki did the same for the "Full Floater" logo from 83-85. Printed directly on the swingarm, not a sticker.
That’s right I completely forgot about those, I had an 83 125.

Post a reply to: Re anodizing the logo on the 84 CR250RE