Posts
26
Joined
7/14/2018
Location
Springfield, OR, USA
Edited Date/Time
11/15/2018 8:47pm
Welcome to my first build forum, dont expect many long explanations or brand new parts! The goal is to build a display bike for my company without breaking the bank. Im starting out with nothing but a 03 cr250 frame and a shop full of parts iv collected over the years of owning hondas. 
first off the frame was powdercoated by tim at Willamette powderfab in tagent oregon
i stripped down a blown up 03 motor iv had in the back of the shop for years, installed a new top end and ceraked everything. titanium nuts and bolts where all ordered directly from china.
i had a set of early model crf forks laying around that had a couple cracks in the hard anno. since theyre no longer structurally sound i figured they would be perfect to cerakote and use for a show bike. i bolted them into a set of black powdercoated 05 cr250 triple clamps off one of my other bikes
i cerakoted the straightest oem radiators i had then installed them, the forks, and a black 02 swingarm i had on a different bike
some more Chinese titanium
when logos just dont match your color scheme.. good thing i have a vinyl printer
the yellow spring wasnt cutting it and powdercoating 1 part wasnt really practical so i did the unthinkable and used spray paint on a motorcycle. i also stole a set of wheels off one of my other CRs.
first off the frame was powdercoated by tim at Willamette powderfab in tagent oregon
i stripped down a blown up 03 motor iv had in the back of the shop for years, installed a new top end and ceraked everything. titanium nuts and bolts where all ordered directly from china.
i had a set of early model crf forks laying around that had a couple cracks in the hard anno. since theyre no longer structurally sound i figured they would be perfect to cerakote and use for a show bike. i bolted them into a set of black powdercoated 05 cr250 triple clamps off one of my other bikes
i cerakoted the straightest oem radiators i had then installed them, the forks, and a black 02 swingarm i had on a different bike
some more Chinese titanium
when logos just dont match your color scheme.. good thing i have a vinyl printer
the yellow spring wasnt cutting it and powdercoating 1 part wasnt really practical so i did the unthinkable and used spray paint on a motorcycle. i also stole a set of wheels off one of my other CRs.
Look forward to seeing the completed bike!!
The Shop
Luxon 4-Post Bar Mounts
$189.95 - $239.95
DeCal Works Huge Plastic Inventory of UFO and Polisport kits.
Free shipping: VITALMX
I'm sure you could pick up another set very easily if you ever did want to ride it - not that you do.
Stainless pegs because im too cheap to go ti.
Galfer brake line and some more ti.
finally printed the rest of the graphic kit
another angle
Pit Row
Havent had much time to work on the build lately but heres a sneak peak of the fmf ti 2 silencer with a custom color matched sticker.
Post a reply to: My Titanium & Teal 2 Stroke Build