"New" Neken Spring/Air Triple Clamp Observations

jeffro503
Profile picture for user jeffro503
Posts
27631
Joined
7/22/2007
Location
St Helens, OR US
jeffro503 1/1/2018 1:51pm
1/1/2018 1:51pm
jeffro503 wrote:
SMV......I may be interested in picking that up from you. You mentioned 24mm , were there other sizes? I wonder what was on my 08' CRF450...
SMV......I may be interested in picking that up from you. You mentioned 24mm , were there other sizes? I wonder what was on my 08' CRF450? I remember playing around with that a bit and could really tell a difference on that bike when I stiffened it up. The way you and Swatdoc have yours set up , I'm really liking the idea of this. Those air clamps are trick as heck too , and going to do my best to track down someone with a set around here. Like to figure out exactly how they work. Send me a PM and let me know what you may want for that stabilizer , definitely interested.
smv ryder wrote:
Yes pre 2011 they were 20mm, so your 2008 CRF 450 had a 20mm model. Not sure why in 2011 they went to the bigger 24mm...
Yes pre 2011 they were 20mm, so your 2008 CRF 450 had a 20mm model. Not sure why in 2011 they went to the bigger 24mm Piston, but one thing I have heard is you want the 24mm over the 20mm. If you revlave them for specific use they really make a difference, Racetech gold valved it’s the bees knees but not needed.
The SFS triple clamps are trick as heck for sure and I do like the feel for sure!
Do you actually gets PM’s? Or can I get an email address?
I have to thank Swatdoc for the detailed pictures and factory Husky for posting up Jason Anderson’s bike.
Hey SMV....you can send me a PM , and it'll go to one of my emails. Look forward to it.
smv ryder
Profile picture for user smv ryder
Posts
880
Joined
11/2/2014
Location
Aspen, CO US
smv ryder 1/1/2018 7:08pm
1/1/2018 7:08pm
jeffro503 wrote:
Hey SMV....you can send me a PM , and it'll go to one of my emails. Look forward to it.
You have mail my man
jeffro503
Profile picture for user jeffro503
Posts
27631
Joined
7/22/2007
Location
St Helens, OR US
jeffro503 1/2/2018 7:05am
1/2/2018 7:05am Edited Date/Time 1/2/2018 7:09am
jeffro503 wrote:
Hey SMV....you can send me a PM , and it'll go to one of my emails. Look forward to it.
smv ryder wrote:
You have mail my man
Hey Smv , I didn't have one come through. I'll try sending you one , so check your email.

Edit :.....I don't think you have an email setup through your PM system here smv. It doesn't have a way to contact you through your profile. In the mean time , if you want to shoot me an email , send it to bigfattylenny@hotmail.com

Long story on that email address haha.
phatfi20
Profile picture for user phatfi20
Posts
289
Joined
4/24/2017
Location
MD US
phatfi20 1/2/2018 8:47am
1/2/2018 8:47am
Can you still use a top neken clamp if your bottom one is stock?

The Shop

See All »
swtwtwtw
Profile picture for user swtwtwtw
Posts
1287
Joined
4/16/2008
Location
Apple Valley, CA US
swtwtwtw 1/2/2018 8:59am
1/2/2018 8:59am
phatfi20 wrote:
Can you still use a top neken clamp if your bottom one is stock?
If the bottom is cast it is not recommended.
rikhek
Profile picture for user rikhek
Posts
328
Joined
2/26/2012
Location
Tulsa, OK US
rikhek 1/2/2018 12:08pm
1/2/2018 12:08pm Edited Date/Time 1/2/2018 12:09pm
phatfi20 wrote:
Can you still use a top neken clamp if your bottom one is stock?
Frustrating when someone like myself takes significant time to provide detailed info on the product being discussed in the very first post and then someone asks one of the most basic questions already detailed/answered in the first/introductory post.

I suggest you read the thread STARTING AT POST #1 to get an answer to your question. Several other posts also discuss...
swtwtwtw
Profile picture for user swtwtwtw
Posts
1287
Joined
4/16/2008
Location
Apple Valley, CA US
swtwtwtw 1/2/2018 12:33pm
1/2/2018 12:33pm
phatfi20 wrote:
Can you still use a top neken clamp if your bottom one is stock?
rikhek wrote:
Frustrating when someone like myself takes significant time to provide detailed info on the product being discussed in the very first post and then someone asks...
Frustrating when someone like myself takes significant time to provide detailed info on the product being discussed in the very first post and then someone asks one of the most basic questions already detailed/answered in the first/introductory post.

I suggest you read the thread STARTING AT POST #1 to get an answer to your question. Several other posts also discuss...
Like this from a few months ago
http://m.vitalmx.com/forums/Vital-MX-Product-Reviews,47/Neken-SFS-Air-S…
Smh
MT952
Profile picture for user MT952
Posts
19
Joined
4/11/2016
Location
Canfield, OH US
MT952 1/2/2018 12:34pm
1/2/2018 12:34pm
I like mine. I typically run 120-130 psi in them. Definitely reduced the arm pump and shoulder pain that I was having. I got both top and bottom clamps even though my 16.5 FE only needed the top.

My only wish would be if Neken offered a slightly taller bar mount so i could raise my forks up on the clamps.



This is how high i wold like to run them. Can't because then the bars bottom out on the top of the fork.



Mike

phatfi20
Profile picture for user phatfi20
Posts
289
Joined
4/24/2017
Location
MD US
phatfi20 1/2/2018 12:50pm
1/2/2018 12:50pm Edited Date/Time 1/2/2018 12:51pm
rikhek wrote:
Frustrating when someone like myself takes significant time to provide detailed info on the product being discussed in the very first post and then someone asks...
Frustrating when someone like myself takes significant time to provide detailed info on the product being discussed in the very first post and then someone asks one of the most basic questions already detailed/answered in the first/introductory post.

I suggest you read the thread STARTING AT POST #1 to get an answer to your question. Several other posts also discuss...


I read the whole thread to avoid just that. You said you only had to buy the top because you already had the bottom. Maybe it is obvious to you because you own them and wrote it that way. That doesn't mean they are, or are not, compatible with a stock bottom clamp.

The kind gentleman that did answer my question said they are compatible but it is not recommended.
Bruce372
Profile picture for user Bruce372
Posts
6329
Joined
4/1/2008
Location
US
Bruce372 1/2/2018 2:38pm
1/2/2018 2:38pm
phatfi20 wrote:
Can you still use a top neken clamp if your bottom one is stock?
rikhek wrote:
Frustrating when someone like myself takes significant time to provide detailed info on the product being discussed in the very first post and then someone asks...
Frustrating when someone like myself takes significant time to provide detailed info on the product being discussed in the very first post and then someone asks one of the most basic questions already detailed/answered in the first/introductory post.

I suggest you read the thread STARTING AT POST #1 to get an answer to your question. Several other posts also discuss...
To be fair, it's quite confusing with the different versions and combos, and then with HSPD discussion, you effectively have 2 threads going on in 1 thread
Bruce372
Profile picture for user Bruce372
Posts
6329
Joined
4/1/2008
Location
US
Bruce372 1/2/2018 2:44pm
1/2/2018 2:44pm
Does anyone have an online resource where the top clamp can be purchased?
smv ryder
Profile picture for user smv ryder
Posts
880
Joined
11/2/2014
Location
Aspen, CO US
smv ryder 1/2/2018 5:35pm
1/2/2018 5:35pm
Bruce372 wrote:
To be fair, it's quite confusing with the different versions and combos, and then with HSPD discussion, you effectively have 2 threads going on in 1...
To be fair, it's quite confusing with the different versions and combos, and then with HSPD discussion, you effectively have 2 threads going on in 1 thread
Yep... super sorry for mucking that up.
I will delete if needed.
Jeffro I will hit you up my man
Bruce372
Profile picture for user Bruce372
Posts
6329
Joined
4/1/2008
Location
US
Bruce372 1/2/2018 6:03pm
1/2/2018 6:03pm
Bruce372 wrote:
To be fair, it's quite confusing with the different versions and combos, and then with HSPD discussion, you effectively have 2 threads going on in 1...
To be fair, it's quite confusing with the different versions and combos, and then with HSPD discussion, you effectively have 2 threads going on in 1 thread
smv ryder wrote:
Yep... super sorry for mucking that up.
I will delete if needed.
Jeffro I will hit you up my man
Don't sweat it dude, it's not like any other thread stays on topic
Lynch
Profile picture for user Lynch
Posts
728
Joined
3/14/2015
Location
SE
Lynch 1/2/2018 9:54pm
1/2/2018 9:54pm
MT952 wrote:
I like mine. I typically run 120-130 psi in them. Definitely reduced the arm pump and shoulder pain that I was having. I got both top...
I like mine. I typically run 120-130 psi in them. Definitely reduced the arm pump and shoulder pain that I was having. I got both top and bottom clamps even though my 16.5 FE only needed the top.

My only wish would be if Neken offered a slightly taller bar mount so i could raise my forks up on the clamps.



This is how high i wold like to run them. Can't because then the bars bottom out on the top of the fork.



Mike

Blink The highest I would raise my forks is the same as your first picture, can't even think about how my bike would handle with them higher up.
Bruce372
Profile picture for user Bruce372
Posts
6329
Joined
4/1/2008
Location
US
Bruce372 1/3/2018 10:14am
1/3/2018 10:14am
So where did people get their clamps from?
Spooner
Profile picture for user Spooner
Posts
2446
Joined
1/8/2011
Location
Kansas City, MO US
Spooner 1/3/2018 10:19am
1/3/2018 10:19am
You can get them from pretty much any dealer. They are distributed by Parts Unlimited.
Bruce372
Profile picture for user Bruce372
Posts
6329
Joined
4/1/2008
Location
US
Bruce372 1/3/2018 10:20am
1/3/2018 10:20am
phatfi20 wrote:
Can you still use a top neken clamp if your bottom one is stock?
swtwtwtw wrote:
If the bottom is cast it is not recommended.
Can you explain this? Or are you having a laugh??

When all bikes came with 7/8 bars, everyone replaced the cast top clamp with a billet clamp with removable mounts.

Never heard of any issues with running a oem cast bottom clamp with a billet top clamp.

Pit Row

See All »
flyinb501
Profile picture for user flyinb501
Posts
673
Joined
7/25/2011
Location
Lakewood Ranch, FL US
flyinb501 1/3/2018 10:25am
1/3/2018 10:25am
Spooner wrote:
You can get them from pretty much any dealer. They are distributed by Parts Unlimited.
How come I'm not not seeing these on any retailer websites? Could I get them from BTO for instance? If I'm reading correctly I would only need the top clamp for my '16 350 sxf?
swtwtwtw
Profile picture for user swtwtwtw
Posts
1287
Joined
4/16/2008
Location
Apple Valley, CA US
swtwtwtw 1/3/2018 11:12am
1/3/2018 11:12am
phatfi20 wrote:
Can you still use a top neken clamp if your bottom one is stock?
swtwtwtw wrote:
If the bottom is cast it is not recommended.
Bruce372 wrote:
Can you explain this? Or are you having a laugh?? When all bikes came with 7/8 bars, everyone replaced the cast top clamp with a billet...
Can you explain this? Or are you having a laugh??

When all bikes came with 7/8 bars, everyone replaced the cast top clamp with a billet clamp with removable mounts.

Never heard of any issues with running a oem cast bottom clamp with a billet top clamp.
My comment is from Neken.
Personally I agree with your experience .
Spooner
Profile picture for user Spooner
Posts
2446
Joined
1/8/2011
Location
Kansas City, MO US
Spooner 1/3/2018 11:32am
1/3/2018 11:32am
Spooner wrote:
You can get them from pretty much any dealer. They are distributed by Parts Unlimited.
flyinb501 wrote:
How come I'm not not seeing these on any retailer websites? Could I get them from BTO for instance? If I'm reading correctly I would only...
How come I'm not not seeing these on any retailer websites? Could I get them from BTO for instance? If I'm reading correctly I would only need the top clamp for my '16 350 sxf?
The retailer still has to set up the product on the site if they want to sell them. Maybe you can call them and special order it? Or just visit a local shop as they have a MAP policy so they won’t be discounted online.
swtwtwtw
Profile picture for user swtwtwtw
Posts
1287
Joined
4/16/2008
Location
Apple Valley, CA US
swtwtwtw 1/3/2018 11:32am
1/3/2018 11:32am
VxeR wrote:
Are these a different version? http://www.nk-neken.com/en/triple-clamps-sfs-spring
Those ended up not being stiff enough, hence the new spring/air.
IMO if the full air is a grade "A", the spring/air is an "A-".
As to availability, I know they are onshore. I have 2 sets coming. Parts Unlimited dealers are the best source.
Just about Any ktm/husky only needs the top clamp, no matter the 48mm fork. UNLESS one is changing clamp colors of course.
rikhek
Profile picture for user rikhek
Posts
328
Joined
2/26/2012
Location
Tulsa, OK US
rikhek 1/4/2018 1:35pm
1/4/2018 1:35pm
flyinb501 wrote:
How come I'm not not seeing these on any retailer websites? Could I get them from BTO for instance? If I'm reading correctly I would only...
How come I'm not not seeing these on any retailer websites? Could I get them from BTO for instance? If I'm reading correctly I would only need the top clamp for my '16 350 sxf?
I think they're hard to source as they're a really new product. I couldn't source one anywhere online or from a local brick and mortar so I contacted Neken directly. Their US rep got back to me and my clamp was on the way the next day directly from Neken USA. Contact information is provided below.

Also, yes you are reading this correctly and only need the top clamp for your '16 350.

Email for questions/ordering: support@nekenusa.com

Or use the contact link at the top of the webpage: www.nekenusa.com

Rick
flyinb501
Profile picture for user flyinb501
Posts
673
Joined
7/25/2011
Location
Lakewood Ranch, FL US
flyinb501 1/5/2018 6:29pm
1/5/2018 6:29pm
flyinb501 wrote:
How come I'm not not seeing these on any retailer websites? Could I get them from BTO for instance? If I'm reading correctly I would only...
How come I'm not not seeing these on any retailer websites? Could I get them from BTO for instance? If I'm reading correctly I would only need the top clamp for my '16 350 sxf?
rikhek wrote:
I think they're hard to source as they're a really new product. I couldn't source one anywhere online or from a local brick and mortar so...
I think they're hard to source as they're a really new product. I couldn't source one anywhere online or from a local brick and mortar so I contacted Neken directly. Their US rep got back to me and my clamp was on the way the next day directly from Neken USA. Contact information is provided below.

Also, yes you are reading this correctly and only need the top clamp for your '16 350.

Email for questions/ordering: support@nekenusa.com

Or use the contact link at the top of the webpage: www.nekenusa.com

Rick
Thanks!

Post a reply to: "New" Neken Spring/Air Triple Clamp Observations