Posts
9079
Joined
8/16/2006
Location
Afton, TN, USA
Edited Date/Time
12/24/2013 5:03pm
If you did I'm sure you recall the whoops and them being made from lightpoles,2 on bottom,one on top,covered with dirt.
It wore off pretty quick and we were hitting bare logs ala endurox. Only time I had creosote on my frame rails.
The start fed straight into them with no 1st turn and the gate was 40 back then.
There were 2 sections of them and I recall a flagman waving yellow before the set after you charged the start area in 4th
like that made it safer or we would slow down,lol.
It wore off pretty quick and we were hitting bare logs ala endurox. Only time I had creosote on my frame rails.
The start fed straight into them with no 1st turn and the gate was 40 back then.
There were 2 sections of them and I recall a flagman waving yellow before the set after you charged the start area in 4th
like that made it safer or we would slow down,lol.
Good times.
The Shop
Luxon 4-Post Bar Mounts
$189.95 - $239.95
DeCal Works Huge Plastic Inventory of UFO and Polisport kits.
When I farmed back in the 80,s I would get my bike our and pin it in the fresh tilled field,making 5th gear berms aching for
a 18 tooth front. That is what I see outdoors today.
Kids today would go home if faced with dust so thick your bike would go so rich from filter blockage that you would run out of fuel from dust. Ask Larry Brooks about leading at Anderson SC on the rc125 only to run out on the lastish lap.
But,it was what it was, I was looking thru photos today with my daughter to show her some pics of my best friend that was
murdered 12/21/86 and we ran across pics of the lightpoles.
I dont have a lot of pics, a loner I was,the few that went along know the insanity I brought,some hung tough others burned out quick but I am proud of what we did,mostly for nothing but the thrill.
Post a reply to: anyone race daytona sx in 85?