Removing stuck lock on grip

Related:
Create New Tag

10/19/2018 7:12 PM

Hey guys, struggling to remove the stock emig grip on the 06 rm250 I just bought. Screw is all the way out, used a screw driver to pry the clamp open and it won't budge. Even tried to whack the grip with a hammer in an effort to crack the plastic tube.

Bars a pro taper which I know is usually a tighter fit on lock on grips. Any ideas on how to get these off?

|

10/19/2018 7:36 PM

Grab it with a good pair of channel locks, and try to twist it. Maybe soak it with some penetrating oil between the bar / grip.

|

10/20/2018 5:36 AM

Hammer and a punch, patience.

|

10/20/2018 6:25 AM

Its plastic dude. Cut that bitch off

|

10/20/2018 11:57 PM

kb228 wrote:

Its plastic dude. Cut that bitch off

That worked like a charm, didn't realize the plastic was that soft. Thanks

|