Posts
480
Joined
2/23/2015
Location
Byhalia, MS
US
Edited Date/Time
8/2/2022 3:34pm
So I finally got my 22 RX300. I'm pretty excited and already looking for extras. I figured being a Beta and only a second year model some parts would be a little difficult but wasn't really expecting plastic kits and graphics to be that bad. So I'm designing my own graphic on Motocal and curious if anybody knows what colors will match the stock graphics and seat cover? Right now I'm just using regular red and Yamaha blue but would like to know if anybody knows the actual colors or what will at least closely match from Motocal.
Scrub design had some beta kits available
HBD does Beta USA race teams graphics.
- This is who i've used on my '21 and I will say, they are slightly off on the red, but it's close.
I've had samples made and none of them are close. As someone else mentioned, HBD prints a lot of their graphics and they are more of a red color and don't match as well.
The Beta factory graphics are somewhere in the fluorescent red spectrum, with an orange hue.
It would take someone with a newer large format printer to print a sample with a block matrix of alll the colors in that flo-red-orange range and then pick the one that matches best.
I've even asked the top dogs at Beta this question and they said they get this question all the time. They default to HBD but HBD is not printing the same color as the factory graphics.
The Shop
DeCal Works Huge Plastic Inventory of UFO and Polisport kits.
Free shipping: VITALMX
Luxon 4-Post Bar Mounts
$189.95 - $239.95
https://shop.betausa.com/products/category/9825.0.1.1.1163467.1149036.1…
But yes, if you are looking to make your own custom graphics and you find someone that can actually match the factory flo red/orange color then please post because I have a set I want to make as well.
Cell phone camera does not do the best at capturing this color but you can see here the bright honda red isn't close to the match the Beta color and this is similar to what you would get from HBD:
180 decals did the sticker kit. Not sure what the color is.
https://180decals.com/
I did notice it was a darker red, but I just wanted to get all the blue off the bike.
Pit Row
It offers a wide style of power I would say like an fmf. Definitely worth it.
Is that the fresco cone pipe? Friend had one of those on it before the messico. Likes the messico much better.
https://www.nlabstudio.com/ Did the 2020 and got the red the closest I’ve seen.
Interesting thread. The colors, yeah, most of the little shops won't be able to match the colors of Kawasaki, Honda, KTM or Beta, fact. The parameters of the lower end printers will never allow for it. We've invested heavily in equipment and development, and guarantee, it's right. As for 'different angles', this is not correct. If you have a SCRUB Beta graphics kit, it's right from any angle. Artificial light will have effect, this is the same with any printed material.
We have loads or designs, many, we never actually show on our sites, as we find the 'back garage' boys selling on eBay just copy our work, so, reserved for special folks, like YOU!
Below is our Polisport Restyle Development bike. (we do the work for Polisport promotion bikes)
I went with scrub designs and am happy with the outcome. I haven't got the bike out the house yet to see it in the sunlight but in the artificial light it matches the polisport plastics really well.
Sun through the window is a little rough
Post a reply to: Beta RX300 Colors