Recent Activity
All
VAMX181 Started a new thread Polishing Aluminum Frame
3/8/2013 12:33pm What is the best way to polish an aluminum frame? I figured you guys would have some experience. Any advice apreciated.
This forum thread has 2 replies.
VAMX181
Added bike check VAMX181's Suzuki
2/28/2013 6:52pm
VAMX181 Started a new thread TTR 125 Problems
12/11/2012 8:27pm just cleaned the carb on my ttr after a long summer of sitting in the trailer. Can get it to start and run fine but will not idle, went one size bigger on the pilot and screwed the idle screw all the way in and still will not idle without choke on, It also has a bad hesitation about half...
This forum thread has 5 replies.
VAMX181 Added a reply to TTR 125 Problems
12/11/2012 4:35pm Didnt run great when I put it away, had the same problem it has now. Put fresh gas in it too
More »
VAMX181 Added a reply to TTR 125 Problems
12/11/2012 4:21pm Carb sat in the carb tank for over an hour and the jets in an ultrasonic cleaner at work. Im doubtful that it is a carb issue because the bike starts right up and runs fine until mid rpm range and it falls on its face
VAMX181 Added a reply to 2007-2009 RMZ 250 Parts
10/9/2012 8:17pm OBO
VAMX181 Started a new thread 2007-2009 RMZ 250 Parts
10/9/2012 8:17pm I have a set of pro circuit cams for a 2007-2009 RMZ 250. Took them out of the bike when i sold it. In good condition. Im looking to get 300 for the pair. Exhaust and intake. Will try and upload pictures later. Message me for more info or questions.
This forum thread has 1 reply.
VAMX181 Added a reply to Budds Creek Ride in the dirt for St. Judes Childrens Hospital This weekend Oct. 13, and 14
10/9/2012 8:17pm bump
VAMX181 Started a new thread Budds Creek Ride in the dirt for St. Judes Childrens Hospital This weekend Oct. 13, and 14
10/9/2012 8:17pm Charity ride at Budds Creek this weekend. Give aways and silent auction. All proceeds go directly to St. Judes Childrens Hospital.
Here is a link to the facebook page for more info.
http://www.facebook.com/events/272168252898978/?ref=ts&fref=ts
This forum thread has 1 reply.
VAMX181 Started a new thread Does anyone have experience with powder coating companies and how much I should pay to get my 05 RM 250 frame powder coated
4/26/2012 4:12pm I have been throwing around the idea of powder coating my frame. Shop down the street quoted me 300 dollars but I have no experience and need some tips and sugestions on price and procedure
This forum thread has 6 replies.
VAMX181 Added a reply to Stewart to motoconcepts???
4/20/2012 5:17pm Thats a Honda 250F look at the clutch cover, not close to true
VAMX181 Added a reply to James Stewart- Options, Opinions, Opportunity
4/12/2012 3:20pm has anyone ever given the thought to james being stuborn and not wanted to try things jgr has offered. I know they put that custom tank on the bike for his comfort but what about softer front end, james has always been known as a guy who runs one of the stiffest set ups in the game.
VAMX181 Added a reply to James Stewart- Options, Opinions, Opportunity
4/12/2012 3:18pm Havent the newer yamaha's had issues with front end feel? like the dubach kit to move the motor forward for more front end bite. That being said could weight and height be a factor? milsaps is considerably taller and heavier than james. Maybe a bigger rider gels well with the bike and the smaller guy doesnt.
VAMX181 Added a reply to James Stewart- Options, Opinions, Opportunity
4/12/2012 2:56pm James in a race car is a joke, People other than jgr employees that witnessed his "try out" at south boston speedway in the late model said he sucked. a second a lap off the usual pace. Unless I have been given info thats not correct I just dont see that route happening anytime in the near future.
VAMX181 Added a reply to Other than SoCal, which National & why?
4/11/2012 6:07pm Budds Creek is about an hour away from Washington, DC could see some cool sights and also hang out at the gaylord hotel on the potomac which is about 40 minutes from the track.