Added reply in a thread Help With AER Forks 6/25/2022 1:20 AM

Ya know Bruce that's a good point. I might also try backing out my compression a tad on my shock - that could help with those slap down landings. Thanks

Added reply in a thread Help With AER Forks 6/25/2022 1:19 AM

Thanks for the input Matt. I definitely need to play with these forks some more. I think I've got some good direction on how to go from the responses so far. I think the plan is gonna be to drain about 70cc of oil out of each fork - down to 210 from ... more »

Added reply in a thread Stock ECU Remap 6/23/2022 1:48 PM

AJ you called TZR? That sounds like a really good ideal!!

Added reply in a thread Help With AER Forks 6/23/2022 11:59 AM

I agree he’s a great guy and very knowledgeable. I was just under the impression that my issue had nothing to do with his parts

Added reply in a thread Help With AER Forks 6/23/2022 11:38 AM

That’s one of the places I get a lot of harshness for sure. What do you think about the air coming out of my left bleeder? It was a good 2-3 second hiss. Bad seal head? If so I might do the SKF glide kit, or just take the $200 I’d spend for that and ... more »

Added reply in a thread Help With AER Forks 6/23/2022 9:56 AM

Thanks Moto. I’m gonna try the suggestions here to see how much improvement I can get, but if I’m still not happy I might look at an MXT Raven or a Coppersmith Hybrid kit

Added reply in a thread Help With AER Forks 6/23/2022 9:54 AM

Thanks FGR. I’m at about 8 hours on them.

Added reply in a thread Help With AER Forks 6/22/2022 10:09 PM

Matt - yes many times. Sometimes I do hear air escaping on the left (air) side. Is this normal or indicative of a problem? I know you do this to release any trapped air, but how much is normal? And I’ve only ever heard the hiss of air on the left fork ... more »

Added reply in a thread Help With AER Forks 6/22/2022 5:15 PM

I don’t understand either why he went with 280cc of oil in each fork when the manual calls for 180-240, which 230 being the oem setting. That confirms what I was thinking - that there is just too much oil in the forks. The JBI website does state you ... more »

Started new thread Help With AER Forks 6/22/2022 3:41 PM

Hey guys need some advice here. I have a '22 KTM 250SXF. I'm a slow MX racer - typically mid pack in the 60+ Vet Novice class in the SoCal OTMX club. Usual track for me is Glen Helen. I'm about 225lbs in shorts/T-shirt, so I'm guessing about 250 in full ... more »

This forum thread has 19 replies

Added reply in a thread KTM Launch Control Help 6/20/2022 10:39 PM

I'll check them out. you'd think if the wiring or connectors were bad something else would be going on too, but the bike runs great otherwise.

Added reply in a thread KTM Launch Control Help 6/20/2022 5:06 PM

Tried that too multiple times. Still doesn't work. Very frustrating

Started new thread 2022 KTM 150SX Parts For Sale 6/20/2022 2:28 PM

I sold my '22 150SX after just a few hours on it. I still have quite a few new and unused parts for sale: Numerous gaskets and O-rings: All brand new OEM/Athena. Including full Athena top end kit, 2 flange gaskets, 2 power valve gaskets, 8 base gaskets

... more »

This forum thread has 1 reply

Started new thread KTM Launch Control Help 6/20/2022 1:04 PM

I have a '22 KTM 250F The manual states to press the TC and Map buttons simultaneously while the bike is in neutral and idling, and then the MIL will flash rapidly to show it's activated. I tried this dozens of times with no luck. When I push both buttons ... more »

This forum thread has 7 replies

Added reply in a thread Stock ECU Remap 6/20/2022 1:00 PM

I thought the newer KTMs ( '21, '22) had locked CPUs which could not be remapped???

Updated photo album My Bikes 6/17/2022 12:05 AM
My Bikes
  • 97441252-932E-4B3A-9372-57A74EAC6DD1
  • New Husky
  • IMG 2975
  • IMG 1925
  • IMG 0293

This photo album has 1 comment

Added reply in a thread Luxon MX Husky FC350 Build - Carbon Fiber Crossbar 6/16/2022 11:59 PM

Billy any chance you might offer those caliper carriers in orange for the KTMs?

Added reply in a thread Engine Mounts/Hangers 6/16/2022 8:40 PM

Very cool. Thanks Billy. Definitely interested to see what you think of them. They certainly look awesome

Started new thread Engine Mounts/Hangers 6/15/2022 9:14 PM

Hey guys I was gonna pop the upper engine mounts/Hangers off my ‘22 250 SXF and have them bronze Cerakoted. I looked at the cool FCP ones, but for $400, I’m not real sure how much of a difference I’d actually feel. I’m a 62yr old vet novice, though, ... more »

This forum thread has 4 replies

Added reply in a thread Did I hear Honda isn't going to run the retro bike all year? 5/31/2022 8:40 PM

Best looking Hondas in YEARS!!!