Recent Activity
All
RM250racer Started a new thread yz250 sss conversion
12/11/2018 4:03pm what all is needed do put the 06 and up forks on my 00 yz250? my forks are pretty much fubar and i want to switch the the SS forks. what other years and bikes have them and that will swap over? i know ill need to triples. would a 450 or 250f triple fit on my bike?
This forum thread has 39 replies.
RM250racer Started a new thread Knock of keihin?
10/15/2017 4:43am
This forum thread has 4 replies.
RM250racer Added a reply to 97 rm125 carb
4/5/2017 7:53pm
More »
RM250racer Started a new thread 97 rm125 carb
4/5/2017 7:52pm bought an rm 125 that the guy pulled the carb off because it was bogging. bought a differnt one for it but it didnt fit and decided to sell it. i got the original carb (im pretty sure) but the slide that was on the bike is too big for the carb. im guessing from the other carb he tried...
This forum thread has 2 replies.
RM250racer Added a reply to When you quit riding did you....
10/15/2016 1:41pm grew up riding with my dad when he could which wasnt very much. always would mess around in the yard though. bought my first pickup a week before i turned 16, and once i got my license i would load up and ride local every single day after school. kinda slowed a bit after i graduated and starting working full...
RM250racer Started a new thread Drill holes in my piston?
5/9/2016 3:32am 02 cr125. Brand new oem cylinder and a pro x piston kit. There's no holes where the exhaust bridge is, the kit says nothing about drilling holes like how the Weisco kits do. Should it still get two holes? Thanks
This forum thread has 8 replies.
RM250racer Started a new thread Linkage question
4/12/2016 4:44am 2002 cr125. When tightening the piece that goes to the shock and swingarm to the link arm, it has zero movement. Back It off an 1/8th of a turn and it's smooth as butter. What can cause this? Without the pivot bolt going through, the two peices themselfs fit nice and snug. Ive never seen this before.
This forum thread has 3 replies.
RM250racer Added a reply to Linkage question
4/11/2016 2:31pm That's what I was thinking but it looks like someone has just rebuilt all the linkage. and everything looks straight. Maybe mis shimmed
RM250racer Started a new thread Athena base gasket question
4/4/2016 7:31am got a 01 yz125 that i bought with an athena cylinder (standard bore) and 2 piece head. The kid put it together and the piston was hitting the head enough to not allow for full rotation. I verified that the crank (hot rods) and piston (Wossner) are correct for the year. The cylinder and head look untouched as far as...
This forum thread has 5 replies.
RM250racer Started a new thread vintage guys, got a long shot question
12/2/2015 10:01am The bike is a 76 dt400. Could anyone tell me what the thread size is for the countershaft nut that holds the front sprocket on? I looked at Ace and Menards and nothing seemed big enough in fine thread. Thanks in advance
This forum thread has 6 replies.
RM250racer Added a reply to Best Fuel Jug for my 2smoker?
12/2/2015 12:49am Be careful the first time filling especially if you're used to that no vent crap, they fill quick lol look away for a second and gas everywhere
RM250racer Added a reply to Best Fuel Jug for my 2smoker?
12/1/2015 7:54pm The vp 5 gallon cans are great but a little expensive for a gas can. for the "eco friendly" you can drill a hole and make your own plug to use as a breather.
RM250racer Added a reply to vintage guys, got a long shot question
12/1/2015 1:53pm I don't own any thread gauges, but that was my first thought. Hardware stores seem like they won't be any help. Biggest metric was a m18 and that wasn't very close at all. I'm hoping I can find the exact size and then start calling around finding someone that might carry something that will work. Thanks for the responses.
RM250racer Added a reply to 2002 Plano Honda Shark Cr 125 complete
11/24/2015 1:32pm Awesome bike! I love the blue bars
RM250racer Added a reply to 2006 RM125 Build
11/9/2015 4:32pm what did you use on the cases
RM250racer Added a reply to 91 kx250, 92 cr125, 96 cr250 and crf 250 parts
10/8/2015 12:11pm how much for the cr125 brake setup and throttle housing to 60123?
RM250racer Started a new thread cr125 runaway
9/29/2015 11:55am I have a 92 cr 125 that wants to run away only with the choke off. the bike will start first kick with the choke on, after 30 seconds or so turning the choke off the bike acts as its WOT. Choke back on and it quickly goes back to a normal idle. It has power while riding with the...
This forum thread has 6 replies.
RM250racer Added a reply to cr125 runaway
9/29/2015 9:32am Okay, so I went through the carb again, everything is clean and clear. same problem. i pulled the flywheel/stator but im not sure as what to look for visually? its seated and free of cracks/tears. Also, I noticed that the coil isn't original. It doesn't span the gap between the mounts, its short about an inch. could this be a...
RM250racer Added a reply to yz250 sss conversion
9/24/2015 11:41am Yeah..... I bought an 09 lol.
RM250racer Added a reply to cr125 runaway
9/21/2015 9:21am does the choke circuit bypass the pilot jet? checked every mating surface for leaks including the left side crank seal with carb cleaner. Visually nothing looks out of place either, I havent pulled the stator to look at the crank seal though.