Recent Activity
All
Monte122 Liked a reply to forum topic Jeff Walker
3/31/2024 10:15pm
This forum topic has 46 replies.
Sandusky26 Liked a reply to forum topic Suspension companys
3/20/2024 6:15pm
This forum topic has 54 replies.
Dirty Points Liked a reply to forum topic Kove moto vs Triumph!
3/8/2024 10:56pm Terrible look for Kove as a brand, which is unfortunate because the company was doing well to lend credibility to their efforts with their participation in Dakar, etc. Can you imagine seeing this from another manufacturer:
This forum topic has 97 replies.
Organicgun Added a reply to Real-world YZ450F Owners: Do you prefer 2020-2022 OR 2023-2024 Models?
2/28/2024 9:00am I had a 2022 and a 23 yz450f. And all I can say is if you really like the character of your 20-22 you most likely won’t like the 23. The 22’s strengths are the 23’s weaknesses and vice versa. I sold the 23. I did like the motor, lightness, and cornering better from the 23, but I prefer the...
cwtoyota Liked a reply to forum topic Resprung bike, finally corners great but handles horribly in the chop
2/21/2024 9:36pm I was thinking along the same line as the guys above saying to back out the rebound clicker. As a general rule when I move up a spring rate I click in at least two clicks of rebound and when I go down a spring rate I back off at least two clicks. This method has worked well for me when I'm searching for clicker settings on a fork: Find yourself a flat turn or a wide very low banked corner and back the rebound out two clicks, ride the corner twice and see how it feels. Keep repeating this...
This forum topic has 15 replies.
Organicgun Added a reply to Resprung bike, finally corners great but handles horribly in the chop
2/20/2024 7:29am The rebound is too stiff. 7 out with stock valving is pretty slow especially if you have softer springs so it’s packing and holding the front down. Unless you’re riding deep sand. I would suggest 10-12 out area as a starting point.
Sandusky26 Liked a reply to forum topic NEW RMZ450!? oh boy.
2/15/2024 8:01am
This forum topic has 341 replies.
Rider 5280 Liked a reply to forum topic Precision concepts suspension
2/13/2024 9:19pm I've also tried Factory Connection. Same results as you. They even sent me another customer's stuff once in addition to valving my B-kit setup for someone 50 pounds lighter than me. I was done. I don't use them anymore either.
This forum topic has 8 replies.
TurboFamilyof4 Liked a reply to forum topic Precision concepts suspension
2/13/2024 9:19pm I’d wait for Enzo! I had my stuff done by them this past summer and it came back great! I haven’t had a Yamaha since the 1st yz400 and always wanted Enzo but couldn’t afford it then. Now I know what I was missing.
This forum topic has 8 replies.
Organicgun Added a reply to Precision concepts suspension
2/13/2024 9:19pm Thanks for the response. I had a yz250f with Enzo suspension and it was really good. So, I know they’ll do a good job. I guess it’s better to wait a month rather than send suspension back and forth a bunch of times to dial in settings. i ended up shipping it to Enzo. It’s gonna seem like a long...
183Matt Liked a reply to forum topic Precision concepts suspension
2/12/2024 9:02pm I’ve had there stuff in the past . It was good. I use AHM and they are awesome to work with. Unfortunately, this time of year you are going to run into extended turn around times for anyone that is good, it’s a busy time of year.
This forum topic has 8 replies.
Organicgun Added a reply to Precision concepts suspension
2/12/2024 9:01pm I’ve used ahm in the past it was ok after a couple redo’s Yeah they seemed pretty overwhelmed. The guy on the phone was nice but seemed pretty disappointed when I asked the turn around. I think I’ll just stick with the stock valving for now it’s not terrible. And then try again in a month. thanks👍
Organicgun Added a reply to Precision concepts suspension
2/12/2024 8:57pm No I haven’t checked with him. That’s a bummer to hear. I had a similar experience with factory connection. I’ve tried a couple kawi’s with precision’s settings and there felt pretty good just kind of soft. I think I just need to be patient, because I’m pretty confident that Enzo will be good from past experiences. thanks for the info...
Rider 5280 Liked a reply to forum topic Precision concepts suspension
2/12/2024 8:53pm Enzo - they are KYB specialists. Have you called Enzo in Texas to see if they can turn your suspension quicker? Craig Decker does amazing work. I've tried Precision Concepts several times. I just never could quite get there with their settings. It was the same for my neighbor, so we both eventually gave up. I will say, however, one of the best shocks I've ever ridden was by Precision Concepts. I still have that shock because it was so good (Showa on old CRF450R) .
This forum topic has 8 replies.
Organicgun Started a new thread Precision concepts suspension
2/12/2024 3:18pm I was wondering if anyone on here has any experience with precision concepts suspension on a yz450f. It’s really hard to find adequate reviews for their work on kyb or Yamaha. I was leaning towards Enzo, but their turn around time is over a month out right now. I’ve heard pretty good things about precision. Just not much for the...
This forum thread has 8 replies.
Organicgun Added a reply to The sport feels noticeably different this year
1/11/2024 10:42pm Supercross cringey? Uh… ok. Remember how badass Brett Michaels “Get your ride on” intro song was? Totally not super hard to watch or cringey.
Organicgun Added a reply to 2023 yz450f for sale
1/10/2024 7:24am Bump
GoggleFiend904 Liked a reply to forum topic Best Graphics Company?
1/1/2024 6:35am I’m not sure if backyard designs installs them, but I was extremely impressed with the communication and how fast they showed up. I designed my own and I think from design to delivery was 4 days from Germany
This forum topic has 39 replies.
Organicgun Started a new thread 2023 yz450f for sale
12/19/2023 6:37am Completely stock, except for a guts winged seat, 2023 yz450f with about 22 hours. Only ridden on private property grass tracks like a sissy. Plan was to do Worcs next year but it’s probably not gonna happen. Never raced. Never even made it to any tracks; the closest track is 2.5 hours away so it doesn’t make sense to keep...
This forum thread has 4 replies.
bulldog5150 Liked a reply to forum topic 2023 yz450f for sale
12/17/2023 9:50am
This forum topic has 4 replies.