Lives in:
USA
Member Since:
12/29/2016
Indiana
23/489130/s1200_0C2CD728_EB31_45DA_AE62_E640502910BE.jpg[/img]
To this day.
Cool stuff coming from Italy! I found a guy who was able to reproduce perfect replica CRE Graphis AND the Marzocchi Magnum45 fork decals that have eluded me for three years... Also scored a lot of Acerbis ISDE numbers from a friend and former ISDE racer. i'm still missing #1's but I have the 6's and 8's to make my number (618) graphics should be here in a few weeks, stay tuned for final build pics!
came out sweet. Those Paioli forks are from Mr Hines
Got a lot done this weekend! the motor is assembled, cleaned up and back in the frame. I put the tank and seat on so I could sit on it and get the bars adjusted, tighten up the handguards, and sort out the mount for the TrailTech Voyager Pro. that part was tricky because I wanted it to tuck behind the headlight, not sit way up on top of the bars. it's a tight fit with the FasstCo bars and stabilizer but i made it work. Pay no attention to...
I've still been working through this whole quarantine mess, so I haven't had as much time to work on this as I'd like, but I recently got motivated! I've ordered what I hope will be the last of the parts I need, and am ready to get this moving! working now on getting the motor cleaned up and back together.
little bit more progress from the weekend. Still a lot to do, but it's starting to look like something!
Picked up the Frame yesterday from Impact Coating & Blasting in Caldwell, Idaho, and i'm very impressed with how it turned out! they did a very good job, and were able to protect the VIN, and the Honda model sticker.