Recent Activity

All

Mx746 Added a reply to D.o.t vs snell vs eu

11/11/2016 7:04am
Lots of good info in this thread. The "blowing the lid off" article that I know many of us have read is now quite dated. I think its time for a new comprehensive round of testing with all of the new technologies. I have wondered if a large like minded group (like we have here) would be willing to fund...

Mx746 Added a reply to Vet Rider Thoughts?

7/29/2016 1:43pm
You may laugh, but there's also BMX. Plenty of older guys racing these days, and at the national level, there is serious competition. There are cruiser classes that permit the use of 24" and larger wheels. USAbmx.com

Mx746 Added a reply to Vet Rider Thoughts?

7/29/2016 10:57am
I'd really like to see a shift toward old school natural terrain tracks without all of the "make it or break it" obstacles. The vintage crowd are the guys who are doing this stuff right imho. I have considered giving the modern bikes and tracks back to the invincible riders and going to find a clean vintage ride. There are...

Mx746 Added a reply to Vented Gear anyone?

6/20/2016 3:49pm
I have moose Sahara and fox 360 vented. The 360 vented absolutely works better for me..just more ventilation everywhere.

Mx746 Added a reply to CR 250 or RM 250?

6/15/2016 8:41am
Owned an 04 rm250 and an 03 cr250. If you have the time to do the pwk airstriker carb conversion, and seal airbox better than stock ( loads of threads over at thumper) and frequently check pv cables youll have a very very good 250. Handling is predictable and stable. Cockpit feels a tad more roomy than rm. The rm...

Mx746 Started a new thread most "flame out" resistant 4t?

6/3/2016 9:01am
Considering adding a 4t to the garage to sit next to the yz250 2t. Not anxious to make the same mistake as i did with the 14 crf450. (450f or even 250f), if resistance to flame out was your primary requirement in a new bike purchase, which would you consider first? Thanks folks!
This forum thread has 21 replies.

Mx746 Added a reply to most "flame out" resistant 4t?

6/3/2016 7:19am
Seems like a year or two ago, ktm owners were all talking about their own methods to get their tps sensor values set correctly, but I haven't seen anything recent on that, maybe its been corrected in the 16's +?

Mx746 Added a reply to Best American-Made 2 Stroke Oil???

2/18/2015 2:53pm
Ive been reviewing oils lately as well, and noticed the flash points vary widely between types, most of the castor base oils are around 400 and higher, and the majority of the others are between 200-250. I didn't see anything listed in the 300's, which seems to me to be a desirable zone, a compromise between having to run a...

Mx746 Added a reply to Reed and no neck brace

12/18/2010 10:43am
Seems to me leatt needs to alter the design to distribute force away from this area, but that would look like an admission of flawed design, so I wouldn't plan on seeing them alter anything. In the meantime there is the UFO reactor2 that could possibly help in this scenario.