All

My left collarbone is broken in the middle with 2cm shortening and my doctor says it probably heals fine without surgery. I can imagine, if it breaks only ones. But I’m thinking “what if I break it again?” My hypothesis is: when plated back to its anatomical shape, it’s in the best position to break again. If it heals not...

Hi, Would like to make a flashy 90's Honda CR, but cannot find a lot of inspiration online. I do have a flo yellow plastics set, which is a present trend as well. But it's even harder to find an example of this with graphics. And I'd like it to be period correct. I have a 93-94 cr125 model, which...

Hi, I would say the Barnett clutch baskets with steel inserts will never wear, so are the best value. So why are still so few people recommending them and favoring e.g. Hinson more...whereas all the coated alloy baskets will wear eventually? Do the friction disk wear so much more or what's the case?

Hi, I've made a lowering spacer for my cartridge fork. But I'm wondering if it isn't restricting the oil flow. This are the internal parts, Showa CR125 '93: The top cap screws in and the rebound spring is locked between the cap and clip. The elliptical part above the shim stack is smaller than the clip, so hits the...

Hi, I've dissassembled my fork, but don't succeed in the very last bit. I want to get the rod out of the compression damper ( = inner tube), but the stop in the middle of the tube (as visible in the second picture) prevents me from. Looks like there are 2 options: 1. Getting that one out 2. Getting the...

Hi, Just came across this TTX swap. Anyone got some info about this? They are quite a bit longer, guess shimming them shorter internally would decrease the stroke too much...

Hi, Does anyone have some inspiration for graphic kits to put on flo yellow cr250-92/94 or cr125-93/94 plastics? Like Ceet or Werx graphic kits or a picture of a team rider. Thanks!