Recent Activity
All
gahooligan Added a comment about news story Cooper Webb Injury Update | Announces End of 2023 Supercross Season
5/1/2023 4:14pm
Shit happens.... I'd like to give it up to the Lord... Glad he is ok. It looked really bad and ouldnhave been much worse. Hope he heals quickly!
Votes:
This news story has 10 comments.
gahooligan Added a reply to 125/150/250/300 KTM/HUS/GG jetting thread
4/15/2023 4:48am Not throwing shade on these setups at all they work great for some people. They didnt work for me. If you seach for my posts you will find the jetting I installed that was recommended from a ktm tech with a lot of experience. His jetting works awesome for me. I have the jetting and slide from this post sitting...
gahooligan Added a reply to 125/150/250/300 KTM/HUS/GG jetting thread
5/4/2022 12:38pm That is awesome news!! Thanks for trying that and sharing your results.
gahooligan Added a reply to 125/150/250/300 KTM/HUS/GG jetting thread
5/4/2022 12:34pm Mine idles fine and will idle fine unattended for extended periods. No bog on the stand or riding. Its getting in the 80s here so well see how it goes and if I need to move back to the leaner slide and jetting for summer. I doubt it though.
gahooligan Added a reply to 125/150/250/300 KTM/HUS/GG jetting thread
5/4/2022 6:14am Did you try the jetting that I listed above that worked for me on the 22and set a bit higher idle? Mine does not bog anymore.
gahooligan Added a reply to 125/150/250/300 KTM/HUS/GG jetting thread
4/28/2022 7:21pm Lo, What is this grand sorcery you speaketh of??? Seriously. I love learning. Please explain. Is this some two stroke wizardry stuff??
gahooligan Added a reply to 125/150/250/300 KTM/HUS/GG jetting thread
4/28/2022 2:14pm Most of us have no clue what is causing it and a lot of knowledgeable people have tried to solve it. The jetting i am running will not harm the bike. It runs clean of you wring it oit and will have the very slightest spooge if i ride at a slowerpace down the trails with my son. I have...
gahooligan Added a reply to 125/150/250/300 KTM/HUS/GG jetting thread
4/28/2022 10:57am Try the jetting I listed above with the red PV spring at no more than one turn in from full out. You have everything you need, it came in the optional jetting Also set your idle a bit higher till it revs out clean on the stand when fully watm if you whack the throttle. Try it, what have you...
gahooligan Added a reply to 125/150/250/300 KTM/HUS/GG jetting thread
4/21/2022 3:41pm Odd for sure. Especially when big changes dont result in much. Only time i have seen that ihappen s when the float level was way off. I rechecked and actually at 3/4 on the air screw and it was in the low 60s end of last ride. I could probably run a 32.5 but not if i idled it way...
gahooligan Added a reply to 125/150/250/300 KTM/HUS/GG jetting thread
4/21/2022 2:19pm Interesting. So I am a bit leaner on bottom and mid, correct? and I do not need your 490 on top in the woods. Did you try combining the two or ever go leaner on pilot and needle?
gahooligan Added a reply to 125/150/250/300 KTM/HUS/GG jetting thread
4/21/2022 6:17am I'm running the stock silencer. I have also run the Turbine Core 2.0 with zero difference felt. Boht silencers rip. I personally like the oem look better but thats probably because, at heart, I am a mx guy but ride wood with my son for now. I ride moto as well and even in MX you have to exit slow...
gahooligan Added a reply to 125/150/250/300 KTM/HUS/GG jetting thread
4/21/2022 4:08am The red is supposed to be the softer spring. The stock spring is yellow. You will never tell the difference by hand. They are both super stiff by hand. Yes, the power curve is supposed to be more linear with the red. Some people say it takes some of the hit away but makes the bike more powerful and faster...
gahooligan Added a reply to 125/150/250/300 KTM/HUS/GG jetting thread
4/20/2022 9:31pm 🤣🤣🤣🤣 you covered anal leakage but left out rectal bleeding... I do think I need to talk to my doctor about feeling confused when I see Walruses though... I love you too AJ🥰 I just figured I would preface it as it Is such a deviation from the norm here. I am curious if someone else has a 2022 125...
gahooligan Added a reply to 125/150/250/300 KTM/HUS/GG jetting thread
4/20/2022 7:58pm Ok, after a few rides I am ready for the hate mail but here goes... If you read any of my posts you know my 2022 125XC still had a hesitation off the bottom with the recommended jetting here. I just never could tune it out no matter what I tried. I believe digger had the same issue on a...
gahooligan Added a reply to 2022 KTM 125/150 SX/XC CDI recall?
4/8/2022 3:16pm I talked to a very knowledgeable and reputable local KTM shop yesterday. They sell and service a lot of ktms. According to him, the issue is with the metallurgy of the new crank supplier. Inferior metal. However, he stated he has only seen a few failures and personally would ride one until it had an issue stating "your crank may...
gahooligan Added a reply to 2022 KTM 125/150 SX/XC CDI recall?
4/5/2022 10:10pm Digger even tried the pwk, with correct jetting, no change, same issue. I am telling you its odd. I am probably going to juat keep trying to get a fix, at least until it seizes the crank, like others. 🤣🤣🤣
gahooligan Added a reply to 2022 KTM 125/150 SX/XC CDI recall?
4/5/2022 9:07pm I appreciate the input. Read Diggers comments on page 2 of this thread. I have his/AJ's jetting from the jetting thread installed and have tried multiple combinations. It runs better than stock for sure, but digger, I, and others have the same bog that cannot be jetted out. I have tried a lot and digger has tried probably everything. Nothing...
gahooligan Added a reply to 125/150/250/300 KTM/HUS/GG jetting thread
4/5/2022 9:39pm While the actual carburetor opening area is the same under the slide for any given slide position the steeper cutaway of the leaner slide produces less vacuum over the needle jet and pulls less fuel through the needle jet, leaning the mixture.
gahooligan Added a reply to 2022 KTM 125/150 SX/XC CDI recall?
4/5/2022 7:08pm Digger - just curious. Are these bikes you had the issue with still going strong with no crank failures even with "the bog"?? Did they get the cdi recall and did it resolve the issue? I am at 13.2 hours, but i am now concerned "the bog" may be related to a tight crank and that I will be pushing...
gahooligan Added a reply to 2022 KTM 125/150 SX/XC CDI recall?
4/4/2022 4:39pm Can anyone confirm if it is an actual crank out of spec issue, or if it just needs rebuild?