Recent Activity

All

Flight Suspension Added a reply to KYB Shock RMZ

12/31/2025 7:40pm
FWIW they are 780+ new, and i just had to search the country to find one. i bought 1 of 2 available in the country new in box. GLWS!

Flight Suspension Added a reply to Need to buy: 2019+ RMZ250 shock

10/26/2025 5:48pm
Thank you guys, i found one through the suzuki dealer network. But just an FYI, I bought the last one available in the US until they come off of backorder..they're getting harder to find

btroxler Liked a reply to forum topic whats the costs for changing fork seals? Quoted $350

8/11/2025 10:10am
$350 is pretty close. Here is a breakdown for what I charged last week on a set of 48mm KYB SSS Forks $117 for SKF Seals and Bushings $25 for 1 Qt Fork Oil $165 Labor $10 Shop Supplies $9.86 Tax/Shipping Bill was $325
This forum topic has 24 replies.

Flight Suspension Added a reply to WP Rear Suspension on new KTM Models

11/26/2024 2:02pm
IMO the compression is way too soft on WP MX shocks, and this causes a rebound problem for quick riders or rough tracks. Try going stiffer and stiffer on low speed and high speed until you get an idea of what direction helps the most.

Flight Suspension Added a reply to honda cr 250 1994 crank case wanted

11/4/2024 9:13am
This search will be a lot like dating, you'll start off with high standards, but here soon, you'll settle for whatever you can find.. In all seriousness though, I just went through the same thing and ended up buying a donor bike to srouce the parts i needed. you can find them on ebay occasionally, but the non damaged, non...

CrGuy2T Liked a reply to forum topic WTB pro circuit parts cr125/250/500 93-01

10/31/2024 9:41am
I have a set of factory 43mm kayaba forks. Robertmartin517@yahoo.com
This forum topic has 1 reply.
I have for sale a restored 1993 Kawasaki KX250 (2-Stroke). $5,250 - Location, Central NJ 08822. I tore this bike down to the frame and replaced every single bearing, gasket, bolt, and wear item possible. The frame was repainted using ColorRite period correct matched paint, leveraging a 3-stage primer, paint, & clearcoat process. On re-assembly every bearing was replaced and mechanical part rebuilt. There is simply too much to list so instead of rambling them off I have provided an inventory of all the parts I replaced, which totals $2815 my cost. I am an engineer by trade and rebuilding...
This forum topic has 22 replies.
1) I don't have the diameters handy, but may be able to find them. These CRF forks aren't "rare" but they aren't easy to find, because the air fork era started right after this, and any KYB spring forks were gobbled up to remove the PSF's 2) I believe SPD machines their own clamps, so pick your forks and you...
Coil bind happens before the physical contact of the coils. Manufacterers determine the coil bind clearance specification depending on wire metallurgy specs and diameters. I'm not in direct contact with WP, so i can't speak to what that clearance is for their shock springs, I was just passing along what I have been told about why they spec the shorter...

FJ993 Liked a forum topic Factory carbon silencer Rm250 93-95

5/21/2024 10:32am
Factory carbon silencer Rm250 93-95. 350€ + shipping
This forum topic has 3 replies.