All

Beta 300 RX is Swiss army knife of dirt bikes. Especially the models with 6 speed, 24 and older. For an MX bike mine is happy at the track, trails, single track whatever. It does everything really good. I installed a green inner power valve spring and backed the PV adjuster out a tick, easy to ride anywhere.

Pro Taper SX Race bend. The clamps made, to me, a big difference on cornering, comfort and stability. The stock clamps had a harshness to them I thought was just the suspension until I got the Luxon's. The Luxon clamps were the only thing I changed from the previous trip to the same track, and pretty much the same conditions, and the bike just felt much more planted under heavy braking, through rutted corners it didn't feel like it wanted to wander and climb out, just went where I wanted it to go. Flatter/dry corners it still has a bit...

Love mine. Also have a 21 300RX that’s I’ve raced all over as well. Beta is a solid company that treat customer’s like no other company does. You won’t regret getting one.

Here is what it looks like with '25 plastics and '24 graphics. The white side panels and air box cover blend the white backgrounds instead of the red plastic breaking it up and looking clunky. Those aren't bubbles, just weird reflections. 😆

Those gold rims have that Beta giving off 1980s CR vibes - very nice!!!

I just finished doing the update on one we have going out. Beta will warranty that update just make sure the dealer has done one before it goes out. Pretty easy to see if its been done, if there is a ground wire on the back/clutch side of the starter then it has not been done. I also flipped the starter relay over. Was not a fan of how the wires were run. I'll take a pic of what it looks like after I changed it for those that are interested.