Recent Activity
All
BryanB339 Started a new thread 2021 Gas Gas MC450F Race Build!! *Final Stages*
7/26/2021 2:15pm Just picked up a 2021 Gas Gas MC450F from Point View Cycles in Ohio! I am going to be documenting my build and testing different parts/products that you might be interested in along the way. I want to give a huge shout to all my sponsors helping me out this year. First thing first. Stock photo! 
As with any...
As with any...
This forum thread has 40 replies.
BryanB339 Added a reply to K-Tech spring conversion for WP AER
6/23/2021 12:17pm Is this still forsale?
More »
Yzf916 Liked a reply to forum topic 2021 Gas Gas MC450F Race Build!! *Final Stages*
5/21/2021 8:24am
Loved the Pro Taper pegs. Had on a previous bike. Arched top really worked well whether back on the pegs or sitting up front.
This forum topic has 40 replies.
BryanB339 Added a reply to 2021 Gas Gas MC450F Race Build!! *Final Stages*
4/29/2021 6:27am Yea I got the Guts complete seat. I got it with the stiff foam because I figured after a few hours it will breakdown and be a little softer. I think the Guts is like 15 mil taller. I am a fan of it for sure.
prida28 Liked a reply to forum topic 2021 Gas Gas MC450F Race Build!! *Final Stages*
4/29/2021 6:25am
Thanks Bryan. I am the same height as you. I tend to run 5mm bar risers and have ran taller seat. I haven’t tried the lower pegs yet and still need to get a taller seat for my Gas Gas. I may have to try the pegs now. The stock seat foam has turned into a sponge couch already.
This forum topic has 40 replies.
BryanB339 Added a reply to 2021 Gas Gas MC450F Race Build!! *Final Stages*
4/29/2021 6:25am They are UFO. Technically they are for a husky but they fit the Gas Gas.
Joe512 Liked a reply to forum topic 2021 Gas Gas MC450F Race Build!! *Final Stages*
4/29/2021 6:24am
Looking to get some new pegs as well, does anyone have experience with Fastway pegs vs the Pro Tapers?
This forum topic has 40 replies.
BryanB339 Added a reply to 2021 Gas Gas MC450F Race Build!! *Final Stages*
4/27/2021 5:23am I am a little under 6'2. I feel the KTM/ Husky/ GasGas peg to top of seat height is short so dropping the pegs a tad and adding the taller seat helped out a lot.
Yamyz144 Liked a reply to forum topic Best knee braces!?
4/26/2021 10:47am
Pods work great but my next pair will be a set of mobus. Heard great things about them.
This forum topic has 20 replies.
BryanB339 Added a reply to 2021 Gas Gas MC450F Race Build!! *Final Stages*
4/26/2021 10:45am Thanks to everyone who posted some feedback so far. I installed the Pro Taper pegs and did some testing over the weekend. Again I went with the -5 mm on the cleat and this made a huge difference for me! They also have a slight arch to them which I love and it made shifting so much better. I never...
BryanB339 Added a reply to 2021 Gas Gas MC450F Race Build!! *Final Stages*
4/26/2021 10:36am Do it! I am coming off an '18 CRF450R. I can def feel the difference in weight and this thing corners so good. I am still messing with the suspension to get it dialled but I feel I am getting close.
Sipes #412 Liked a reply to forum topic 2021 Gas Gas MC450F Race Build!! *Final Stages*
4/26/2021 10:33am
Nice bike. This is making me want to sell my 19 kx450 and get one of these lol.
This forum topic has 40 replies.
Rickyisms Liked a reply to forum topic 2021 Gas Gas MC450F Race Build!! *Final Stages*
4/26/2021 10:33am
For me, I can't stand the Flo pegs. They're great quality but are too sticky for me. I have bigger feet and run the Fastway Evo airs with the smaller cleat kit. Good comfort and traction, still easy enough to move your feet around on the pegs when you need to.
This forum topic has 40 replies.
BryanB339 Added a reply to 2021 Gas Gas MC450F Race Build!! *Final Stages*
4/22/2021 9:23am Yea I was concerned with the durability of them. They make the steel cleat so if I blow through these billet ones pretty quick I will probably switch over to that. The only thing is the steel comes in just the standard height. I never tried the flo pegs. Let me know how they work out.
BryanB339 Added a reply to 2021 Gas Gas MC450F Race Build!! *Final Stages*
4/22/2021 9:20am Those are UFO's. They are technically Husky guards but the frames are the same so they work.
BryanB339 Added a reply to 2021 Gas Gas MC450F Race Build!! *Final Stages*
4/21/2021 7:45am Thanks for the feed back everyone and liking my post so far! In hopes to make the rider cockpit a little more friendly for my height, I got a set of the Pro Taper foot pegs and chose to get the extra cleats at a -5 mil. I am pumped to get them on the bike and do a little...
Jt726 Liked a reply to forum topic 2021 Gas Gas MC450F Race Build!! *Final Stages*
4/21/2021 7:37am
Makes me want one. Great job.
This forum topic has 40 replies.
Travis_Hudson Liked a reply to forum topic 2021 Gas Gas MC450F Race Build!! *Final Stages*
4/21/2021 7:37am
Bike looks sweet!!
This forum topic has 40 replies.
TunaBro Liked a reply to forum topic 2021 Gas Gas MC450F Race Build!! *Final Stages*
4/21/2021 7:37am
Damn that looks good!
This forum topic has 40 replies.
BryanB339 Added a reply to 2021 Gas Gas MC450F Race Build!! *Final Stages*
4/14/2021 5:25am This thing is really starting to come together now. Let me know what you guys think! Recent upgrades; Guts tall complete seat. Its about 15 mil taller than stock UFO complete plastic kit MX Graphics complete custom kit P3 skid plate, disc guard, and fork protectors Protaper Fusion SX bend bars with clamp on grips Scar racing bar mounts. These...