Recent Activity
All
Boo Boo Added a reply to Rmz250 oil change concern
3/22/2023 8:37pm Awesome good to hear that, thank you
More »
Boo Boo Added a reply to Rmz250 oil change concern
3/18/2023 8:10am Next time I change oil I’ll post a picture. The magnetic screen captures it. The paper filter looks good.
Boo Boo Started a new thread Rmz250 oil change concern
3/18/2023 3:01am Every oil change on my rmz250 there are metal shavings on the metal screen filter. Is this normal? I try to change the oil every 2-3 rides. No clutch issues, gear slipping, or knocking when running
This forum thread has 5 replies.
Boo Boo Added a reply to 2021 RMZ 250 exhaust
6/16/2022 6:44pm Ok cool thanks. I haven’t tried the maps
Boo Boo Started a new thread 2021 RMZ 250 exhaust
6/15/2022 8:29pm Does any after market exhaust improve the performance of the 2021 rmz250? I think I got the suspension working good and now looking at motor mounts to reduce rigidity!
This forum thread has 6 replies.
suspensionguy Liked a reply to forum topic 2021 RMZ250 suspension and rigidity
6/13/2022 5:18am
Use the kawi torque specs, Suzuki’s are real tight. Revalve it. Linkage. Will make it way more comfortable.
This forum topic has 20 replies.
250 cross Liked a reply to forum topic 2021 RMZ250 suspension and rigidity
6/9/2022 5:57am
Springs were most important in my opinion. I weigh about 175. Do you have many hours on your bike? I only ride a natural terrain turn track, no more jumps for my 66 year old knees so I think it's taking my forks a long time to break in. I also ride a 290 RMZ and a RM250 for comparison. I wouldn't be shy about going way out on compression until it loosens up and you're seeing near full travel.
This forum topic has 20 replies.
Boo Boo Added a reply to 2021 RMZ250 suspension and rigidity
6/8/2022 8:21pm Do think the revalve helped a lot or the springs did enough?
hog501 Liked a reply to forum topic 2021 RMZ250 suspension and rigidity
6/7/2022 1:58pm
Ping goes over some great setup tips in this video for the RMZ250 https://youtu.be/5jqLzkXAYew
This forum topic has 20 replies.
MXer391 Liked a reply to forum topic 2021 RMZ250 suspension and rigidity
6/7/2022 1:58pm
Grab a torque wrench and the manual and loosen up and re-torque the main chassis bolts (swingarm, linkage, engine mounts, etc.) You can back off the torque on the engine mounts a little bit. That will give you a little more "flex." You can also look into aftermarket engine mounts.
This forum topic has 20 replies.
TheSteezeMaster Liked a reply to forum topic 2021 RMZ250 suspension and rigidity
6/7/2022 1:58pm
Those clickers sound like they may be in a little far (stiff on the compression side, and slow on the rebound side). I would try something around 12 clicks out on rebound and compression for the fork. And I would try something in the 14 range for rebound/compression (I believe that’s stock). The good news is it’s KYB suspension so it has potential!
This forum topic has 20 replies.
seth505 Liked a reply to forum topic 2021 RMZ250 suspension and rigidity
6/7/2022 1:58pm
I honestly don't have a problem with mine after getting the correct springs on it. I had my steering stem a little on the tight side and I just loosened that slightly while greasing everything. I run Pro Taper bars with stock clamps/bar mounts.
This forum topic has 20 replies.
Boo Boo Started a new thread 2021 RMZ250 suspension and rigidity
6/7/2022 6:10am I got a 2021 RMZ250. Installed Race Tech lighter springs front and rear. Sag set at 105mm, and clickers around 8-10 out. For the most part it works good but it is very rigid compared to my 18 CRF 450. Steering was stiff also. Anyone got ideas on how to loosen it up, get more flex, and handlebar shock?
This forum thread has 20 replies.