Recent Activity
All
billyg371 Added a reply to Opinions on 2018 YZ Rims
7/15/2017 7:15am Let me know if they get them in next week! California might have them sooner. Im clear across the country on the beaches of North Carolina. I sure hope they show up soon. I have a bunch sold (including mine 
)
)
More »
billyg371 Added a reply to Opinions on 2018 YZ Rims
7/13/2017 4:56pm Well according to the Yamaha order desk it's on a production delay. I handle all the motocross business at the dealership I work at amongst a lot of other things but hopefully it's not a long delay.
billyg371 Added a reply to Opinions on 2018 YZ Rims
7/13/2017 6:21am I didnt even think to check that! Im usually just on the dealer site while looking parts up. Oil filters are looking to be the same as 14-17! So thats a good thing. Ill try and update in here as I find out more from them!. What dealer do you deal with up there? Im originally from Northeast PA.
billyg371 Added a reply to Opinions on 2018 YZ Rims
7/13/2017 5:46am Parts fiches have been out for a week or so on 250s, 125s and some off-road bikes. Nothing yet for the 450 unless I'm looking in the wrong spot on the dealer site. Hopefully we know something soon! Edit: 450 fiche only available on yamaha dealer site through pmpro. Dates for these bikes are all over the place, just checked...
billyg371 Added a reply to Loretta's 25+ and 40+ rider rosters
7/13/2017 5:02am He qualified in Alabama. Weekend after high point regional.
billyg371 Added a reply to Opinions on 2018 YZ Rims
7/12/2017 12:57pm Just got off the phone with Yamaha and was informed that there is a production delay on the 450s. Ship dates are tentative for September. Hopefully they come sooner than later, I have a bunch of these on order..
billyg371 Added a reply to Catastrophic engine failure 2017 Honda 450r
6/21/2017 9:20am Working to get honda to cover these issues. Second picture in this post, bike is heading to a Honda dealer to get looked at. Both are friends of mine and sold these bikes to them in North Carolina, unfortunately both of these bikes are now in Pennsylvania. Hopefully honda will take care of them. Dad you heading to unadilla?? K8...
billyg371 Added a reply to Letter To Bike Shops
3/24/2017 10:46am I use WPS as well as MTA. When I started here (June 2016) They had Fly Gear that was a couple years old with mismatched jerseys and pants. Gloves were scarce and all over the place. This dealer has only been open 2 years in this location, so I'm having to build up inventory slowly. But I'm almost all sold...
billyg371 Added a reply to Letter To Bike Shops
3/24/2017 8:49am Happy to say that I carry just about everything on your list except the master cylinders, but I do keep rebuild kits for what I sell (Honda and Yamaha) plus Kawasaki and Suzuki. Its truly tough to stock expensive items and tell your owner why you need them but sit on the self for a while. I started at the...
billyg371
Added bike check billyg371's Setup
9/15/2016 7:40am
billyg371 Added a reply to Wheels for 14-up YZ 250f?
6/23/2016 1:26pm Awesome! Thanks I'll give him a call!
billyg371 Started a new thread Wheels for 14-up YZ 250f?
6/23/2016 12:05pm Looking to get a set of wheels for a '17 YZ250F. What do you guys recommend? Most likely going to get them from dubya. Bike will be raced in some outdoor nationals. Want to get something that will hold up well. Thanks guys!
This forum thread has 4 replies.
billyg371 Added a reply to 2005 CR125 chassis and carb with 2003 CR125 engine...HELP
4/28/2016 2:35pm the bike is basically a frankenbike haha. ill check the readings when i get home from work. i wrote them down. the compression i remember was 150-155. leak down ill have to check. I was shocked that it had 150psi when i took the head off. pitted and looked like some shot a bb gun at it. Come to find...
billyg371 Started a new thread 2005 CR125 chassis and carb with 2003 CR125 engine...HELP
4/28/2016 2:35pm Hey guys need some help here. I have a friend who bought this bike for his son and really wasn't aware of the issues. Heres a quick overview The frame, wire harness and Carb is a 2005. The engine is a 2002-2003. Had a hard time finding the right cylinder to match the bottom end. The issue lies in the...
This forum thread has 14 replies.
billyg371 Added a reply to 2005 CR125 chassis and carb with 2003 CR125 engine...HELP
4/28/2016 12:10pm Crank seals check and there is no leakage. now the powervalve and head are a different story. I guess the head was never replaced when the guy rebuilt it so i ordered a new top end kit, head, and some power valve parts. im not too familiar with the power valve. i referred to the service manual and that was...
billyg371 Added a reply to 2005 CR125 chassis and carb with 2003 CR125 engine...HELP
4/27/2016 11:09am Yes that is correct on the 32:1. engine was rebuilt with new crank seals (i did not rebuild it) float is in spec needle and seat are new and sealing perfect. i will be checking the exhaust valves after work. i would hope that the engine builder checked the squish. the complete engine is an 03 compression is good leak...
billyg371 Added a reply to 14' yz450 vs rmz450
2/29/2016 8:11pm Just picked up a 14' YZ450. Im coming off a 2011 RMZ 450 and honestly the yamaha feels great! The suzuki handled great like everyone says but it just lacked power. The yamaha once you get it set up right, will handle just as good if not better than the suzuki. Plus you have the tuner which is an awesome...
billyg371 Added a reply to SKF Wheel bearings, seals, spacers?
2/27/2016 7:25am Thanks man!
billyg371 Started a new thread SKF Wheel bearings, seals, spacers?
2/27/2016 7:25am Hey guys Just bought a used 14 YZ450F and I am going to replace the wheel bearings and seals. Does SKF make them for the new Yamahas? I couldn't seem to locate part numbers? Thanks in advance!
This forum thread has 2 replies.
billyg371 Added a reply to Your best mx photo shot with phone?
1/2/2016 10:35am Here is my best shot with an iPhone 4S. Back when I wrenched for coop his rookie season! Made it onto the SOBmx shirts printed for his first outdoor race. 