Recent Activity
All
Bhack711 Added a reply to 97 PC KX 125
3/14/2026 6:06pm Bhackenson@hotmail.com
More »
Bhack711 Added a reply to 97 PC KX 125
3/12/2026 6:54am Hi Miles05 email sent, check your junk if you dont see it!
Bhack711 Added a reply to 97 PC KX 125
3/11/2026 6:12am Awesome thanks sent you an email, check your junk if you don't see it!
Bhack711 Started a new thread 97 PC KX 125
3/10/2026 6:28pm Hi Guys, I'm in the middle of doing a 97 Pro Circuit KX 125 build. I have almost everything I need to complete it but the Pro Circuit foot pegs, and the period correct front BRAKING brake rotor. Anyone have any of these or know someone who does? Any help is greatly appreciated! Just throwing the 98 here for the...
This forum thread has 6 replies.
Bhack711 Started a new thread 16 CRF 250 clutch Jingle noise...weird
8/3/2022 6:09pm Hey guys, 
I've had 6 (now 7) CRF 250's over the years ranging from 2004 up to my latest 2016. I sold my 2010 to get this nice lower hour 2016. When I took it out for the first time the clutch was making this weird "jingle" noise whenever I pull the clutch in when its in gear. I...
I've had 6 (now 7) CRF 250's over the years ranging from 2004 up to my latest 2016. I sold my 2010 to get this nice lower hour 2016. When I took it out for the first time the clutch was making this weird "jingle" noise whenever I pull the clutch in when its in gear. I...
This forum thread has 9 replies.
Bhack711 Added a reply to Wristwatches
4/24/2020 6:09pm That thing is sweet, I had to get rid of my cb350 last fall. My friend has actually been wearing the watch while doing motos and mountain biking with no issues! He's been one heck of product tester
Bhack711 Added a reply to Wristwatches
4/24/2020 1:27pm gt80rider, I actually own my own timepiece company geared towards the moto/auto community. I've built it from the ground up over the past 2 years. It's been a challenge, and racing moto over the years has taught me a lot of lessons I never thought would transfer over to this. As a moto guy, I've always been into watches, and...
Bhack711 Added a reply to 16 CRF 250 clutch Jingle noise...weird
4/18/2020 6:38am I dont mind the noise just dont want it to gernade. Think any Hinson components or Rekluse would help?
Bhack711 Added a reply to 16 CRF 250 clutch Jingle noise...weird
4/17/2020 8:06am Put all the new parts in like suggested and more additional oil, still the same... Back to the drawing board. Anything else I could be missing??
Bhack711 Added a reply to 16 CRF 250 clutch Jingle noise...weird
4/12/2020 6:10am Thanks guys. I didn't think of the throw out bearing. I'll give that a shot since its relatively inexpensive to replace as well as getting a standard clutch plate to replace the judder spring set up. I have done that on my 2010's with good luck. My friend recently got a 2020 Crf250 and he called Hinson and they said...
Bhack711 Started a new thread Why wont my 2010 CRF 250 Cold Start
10/16/2017 11:55pm Surprise surprises, another EFI CRF hard to start question. I'm going make this as simple and short as possible. Bought a really low easy hour (about 10) 2010 crf250 this June after not riding for about 6 years due to injuries. The bike still had all the original ink stampings on it. From day 1 at the guys house it...
This forum thread has 16 replies.
Bhack711 Added a reply to Why wont my 2010 CRF 250 Cold Start
10/9/2017 5:50am We have a winner! FGR01 was right about the coolant temp sensor. Went through all other steps. Checked the capacitor, was holding 5v, ruled that out. Spent the $20 on the coolant temp sensor, and went riding 2 times since and fries up between 2-5 kicks no problem. Thanks for all the help guys!
Bhack711 Added a reply to Yamaha of Troy restore 99% complete with 250f
9/26/2017 6:41am This thing is spot on, sick job!
Bhack711 Added a reply to Why wont my 2010 CRF 250 Cold Start
9/26/2017 6:38am This is great thanks for the help guys. As far as the head goes the the valves were lapped, seats were good, leak test was good, clearance was adjusted. Only the left intake valve was out of spec by a thousandth. I do know a little about electrical and circuits, and the capacitor actually really makes sense when you think...
Bhack711 Added a reply to Why wont my 2010 CRF 250 Cold Start
9/25/2017 5:34am Ok did some testing over the past few days on this. I set my tps to .65 with the same results. Came back the next day, set it to .55, same results, then went down to .4, same results every time, 15-20 kicks when cold. I did this over a few days so I could replicate a new day of...
Bhack711 Added a reply to Why wont my 2010 CRF 250 Cold Start
9/21/2017 7:35pm
Sitting right at .47. Ill have to crank it up to .65 and see if that helps.
Bhack711 Added a reply to What caused this
9/18/2017 8:05am How many hours on the crank? A friends bike had this problem. It turned out that the crank bearings were worn cause it to be a big "longer" than spec, and the piston hit the head.
Bhack711 Added a reply to Why wont my 2010 CRF 250 Cold Start
9/15/2017 5:14pm Paw Paw, I have not check that. I just looked into it, and I'm ordering the tools I need as we speak. Ill keep you posted. Thanks!