aloyd316

aloyd316 Added a reply to Best carburetor for an 1985 KX125

10/6/2025 1:25pm

All with the VM34SS, correct? Any major motor mods or are you close to stock? Either way, this gives me a really good baseline to start at. Thanks!

More »

aloyd316 Added a reply to Best carburetor for an 1985 KX125

10/6/2025 12:30pm

Can you share the carb settings that you settled with?

More »

aloyd316 Added a reply to Best carburetor for an 1985 KX125

10/6/2025 11:51am

Any luck finding jetting specs on your stock carb? I have an '85 KX125 with a fresh top end, new vortex reed cage, and PC pipe. It's not bogging, but the power seems very flat compared to what I would expect and have read on this year model. I'm thinking it's on the lean side, but I will need to...

More »

aloyd316 Started a new thread 1993 - 1995 RM125 Silencer

8/20/2025 5:05am

I am finishing up a 1985 KX125, and the OEM silencer I have is busted up. I was thinking of using the RM silencer if the measurements are close enough, but it's tough to tell from the photos online. They appear to be a somewhat straight shot to the expansion chamber. Does anyone out there have a '93 - '95...

More »

This forum thread has 0 replies.

wpark89 Liked a reply to forum topic 81 CR125 Silencer

8/20/2025 4:45am

Just a thought but I've been very unhappy with those dg silencers. I have used pro circuit 304s on a lot of vintage 125s. It's very easy to relocate a mount or make some small mods to make them work. Most of the bikes before low boy pipes came out run very straight from pipe to silencer so it's a fairly easy job. This is a 93-95 rm 125 silencer I used on my KTM.