Posts
432
Joined
4/1/2008
Location
USA
Can anyone recommend a reliable and accurate tyre pressure gauge with auto shut off that I can connect to my compressor’s airline and set the tyre pressure and it will fill to the specified pressure? Needs to be accurate for dirt bike tires but also able to use for truck tires.
Or is the auto shut off feature just a gimmick, and I’m better off with a regular inline gauge that I can connect to the airline?
Cheers,
Simon
Use any convential screw type pressure regulator.
Just cross check it first with your preferred hand held tire gauge to verify the reading offset (if there is one).
I have a separate outlet on the hardline coming from my compressor that I can set with the regulator for doing quick tire checks, etc...
that’s a great idea… i will copy it for sure!
Thanks, and that’s a great idea if I had my compressor plumbed in, but I move it about a load so this setup needs to be handheld.
Milwaukee inflator
The M18 is overkill fot dirtbikes but works great on large vehicles.
The M12 is alot better on smaller tires bit will need a couple batteries to pump up a large truck tire from flat
The Shop
DeCal Works Huge Plastic Inventory of UFO and Polisport kits.
Luxon 4-Post Bar Mounts
$189.95 - $239.95
I've got the m18 inflator and in smaller tires it overshoots the set pressure by a lot. I'll set it to 13 and by the time it shuts off it's at 19.
Mount it on an angle piece of metal and clamp it to part of the compressor handle, if say it is a 10g portable that has the metal handle opposite the wheeled end.
That's what I did before I went up to a 220v with hard plumbing.
Otherwise you are looking at wiring in a variable pressure switch that shuts off the compressor.
For that, just get a battery operated one with the swappable batteries like a Dewalt, Ryobi, Milwaukee, etc... with a digital preaaure setting. That's what I use when out at the track.
How small of tire? Mine seems to be just fine for my dirt bikes, I haven't used it on a bicycle tire yet though.
Amazon has some cheap one that work really good. All though I always double check my pressure with a good quality tire gauge.
I’ve seen ppl at the track with a Milwaukee one but I keep it simple. I use a bike pump and do around 5-10 pumps on both tires, then I use a digital air gauge with a manual release button and let air out to my desired psi. I do it first thing before I lube my chain and I’m good to go.
Post a reply to: Auto shutoff tire pressure gauge