Cleaning rust off Nickel plated exhaust

Motojmag247
Posts
111
Joined
4/30/2023
Location
Columbia, MO, USA

I got a PC pipe off eBay and it has quite a bit of surface rust on the nickel plating. What is everyone using to clean this off?

|
11/16/2025 12:53pm

Find someone with a laser cleaning machine, it will be pristine again in 10 minutes.

Motojmag247
Posts
111
Joined
4/30/2023
Location
Columbia, MO, USA
11/16/2025 2:35pm

That might be more expensive than what I paid for it. Looking for a cheap option. 

FahQ
Posts
890
Joined
7/5/2015
Location
USA
11/17/2025 5:16am

Scotch Brite pads WD-40 and elbow grease

5
LovnIT
Posts
11
Joined
6/22/2025
Location
Lamar, MO, USA
11/18/2025 7:13pm

Steel wool and WD-40 works wonders. I've also used Maxima MPPL.

1

The Shop

sandman768
Posts
8304
Joined
3/21/2014
Location
Saratoga Springs, NY, USA
11/19/2025 5:50am

Hit the rust with muratic acid, then lite scuff with scotchbrite & wd40…

2
mxracer666
Posts
795
Joined
10/28/2010
Location
NE Iowa, IA, USA
11/25/2025 9:25pm

If you haven't had experience with Muratic acid before, use caution that you do not breathe the vapors that come off it as it eats the rust (do it outside and hold your breath!) and wear nitrile gloves. Wipe on/off with paper towels.  It does an amazing job on rust. You can get a gallon of it at Home Depot for cheap.  The vapors are like mustard gas! Extremely strong

2

Post a reply to: Cleaning rust off Nickel plated exhaust

The Latest