1988 RM250 DG pipe with no dent for radiator hose

collinsvintage
Edited Date/Time 1/23/2022 4:07pm
Hi guys. I am new to this forum. I saw some discussions about the 87-88 pipe for the RM250. My bike is an 88 but had an 87 pipe on it which fit perfectly. I then decided to buy an 88 pipe for it since the rest of the bike is 100% original. I ended up buying an 88 DG pipe (brand new old stock) which fits perfectly too except for the radiator hose which is squished between the pipe and the cylinder. I have not ridden the bike after I installed the pipe but am sure it will overheat since water will not circulate properly because of this. I am almost making a dent on the pipe in order to give the hose enough clearance (the 87 pipe already had a factory dent on it for this purpose). Can anyone give me a hint on what else I could do (rather not dent my brand new pipe!). Thanks
|
sandman768
Profile picture for user sandman768
Posts
7960
Joined
3/21/2014
Location
Saratoga Springs, NY US
sandman768 2/27/2019 9:49am
2/27/2019 9:49am
Very limited supply of pipes for the 88 as I”m sure you know by now, if it fits but needs a little dent to make clearance for the hose, do what you have to do! If you plan on riding it, the pipe can’t sit on the hose....I had to dent my new DG pipe for my 84RM250 also, to clear a engine mount bolt. All this means nothing without photos....
collinsvintage 2/27/2019 10:48am
2/27/2019 10:48am
Thanks for getting back to me! I had I bike like this on in 88 with a pipe from pro circuit which fit perfectly. This pipe from DG is not a low boy pipe like the ine from PC but it looks nice too. The only issue is the fitting of the radiator hose which intrigues me. I wonder if back in 88 riders had to reroute the hose or they made a dent on the pipe themselves.
nch209
Profile picture for user nch209
Posts
480
Joined
1/1/2017
Location
NoVa, VA US
nch209 2/27/2019 10:58am
2/27/2019 10:58am
Not too much to offer, but I would not be scared to dent it. Heat it up, and use a thick walled steel pipe to bang on to form in just how you need. I think if you took your time you could make a clean factory look, and then just buff out the heat marks and you would be set. Good Luck!
1

The Shop

See All »
quiknic
Profile picture for user quiknic
Posts
843
Joined
11/30/2008
Location
Santa Clarita, CA US
Fantasy
820th
quiknic 2/27/2019 3:45pm
2/27/2019 3:45pm
collinsvintage wrote:
Thanks for getting back to me! I had I bike like this on in 88 with a pipe from pro circuit which fit perfectly. This pipe...
Thanks for getting back to me! I had I bike like this on in 88 with a pipe from pro circuit which fit perfectly. This pipe from DG is not a low boy pipe like the ine from PC but it looks nice too. The only issue is the fitting of the radiator hose which intrigues me. I wonder if back in 88 riders had to reroute the hose or they made a dent on the pipe themselves.
Do you still have the Pro Circuit pipe that you took off? I am looking for a Pro Circuit works pipe for my 88 RM-250 if you have it and would be interested in selling it?
sandman768
Profile picture for user sandman768
Posts
7960
Joined
3/21/2014
Location
Saratoga Springs, NY US
sandman768 2/27/2019 5:28pm
2/27/2019 5:28pm
That’s not bad, heat it up, dent it in where it hits the hose, then wrap hose with some heat tape..nice bike...
collinsvintage 2/28/2019 6:28am
2/28/2019 6:28am
collinsvintage wrote:
Thanks for getting back to me! I had I bike like this on in 88 with a pipe from pro circuit which fit perfectly. This pipe...
Thanks for getting back to me! I had I bike like this on in 88 with a pipe from pro circuit which fit perfectly. This pipe from DG is not a low boy pipe like the ine from PC but it looks nice too. The only issue is the fitting of the radiator hose which intrigues me. I wonder if back in 88 riders had to reroute the hose or they made a dent on the pipe themselves.
quiknic wrote:
Do you still have the Pro Circuit pipe that you took off? I am looking for a Pro Circuit works pipe for my 88 RM-250 if...
Do you still have the Pro Circuit pipe that you took off? I am looking for a Pro Circuit works pipe for my 88 RM-250 if you have it and would be interested in selling it?
The 88 RM250 I owned in 88 was sold in 89 when I got an 89 RM 250. Never seen that bike after that, sorry! My current RM I purchased recently and it came with an 87 pipe (which fit perfectly). I am intrigued because the 87 pipe that was on the bike is a DG pipe too and it had the factory dent for the radiator hose but the new pipe I got specific for the 88 model does not - a bit frustrating to say the least but I'll make a dent as suggested by everyone - Just hope I am able to make it look minimally decent.
collinsvintage 4/11/2019 1:53am
4/11/2019 1:53am
sandman768 wrote:
That’s not bad, heat it up, dent it in where it hits the hose, then wrap hose with some heat tape..nice bike...
Quick feedback on my pipe. I heated up the pipe and made the dent as instructed. I honestly thought it would be much easier - had to hammer the pipe with no mercy to get it to give in! I was able to dent it enough to get the hose by without being squashed but it still touches the pipe. Since it has the extra sleeve to protect it from the heat, I hope it should be ok now. At least the dent has a factory look which made me happy. Smile
collinsvintage 4/11/2019 2:11am
4/11/2019 2:11am
sandman768 wrote:
That’s not bad, heat it up, dent it in where it hits the hose, then wrap hose with some heat tape..nice bike...
collinsvintage wrote:
Quick feedback on my pipe. I heated up the pipe and made the dent as instructed. I honestly thought it would be much easier - had...
Quick feedback on my pipe. I heated up the pipe and made the dent as instructed. I honestly thought it would be much easier - had to hammer the pipe with no mercy to get it to give in! I was able to dent it enough to get the hose by without being squashed but it still touches the pipe. Since it has the extra sleeve to protect it from the heat, I hope it should be ok now. At least the dent has a factory look which made me happy. Smile
I forgot to mention I finally took the bike out for the first ride (and my first ride after 15 years). It worked great but I have a major leak at the flange. It is either not tight enough (was concerned not to over tighten) or I might have put the gasket backwards (not sure if there is a specific side that should go against the motor). The bike ran awesome though and the only issue that I noticed is the bottom shock linkage/bushings developed some play and will have to be replaced/serviced. Not sure how complex this will be and I hope to find the parts I might need on Ebay.
N.Robo
Profile picture for user N.Robo
Posts
3
Joined
11/25/2019
Location
GB
N.Robo 11/25/2019 5:18pm
11/25/2019 5:18pm
collinsvintage wrote:
Hi guys. I am new to this forum. I saw some discussions about the 87-88 pipe for the RM250. My bike is an 88 but had...
Hi guys. I am new to this forum. I saw some discussions about the 87-88 pipe for the RM250. My bike is an 88 but had an 87 pipe on it which fit perfectly. I then decided to buy an 88 pipe for it since the rest of the bike is 100% original. I ended up buying an 88 DG pipe (brand new old stock) which fits perfectly too except for the radiator hose which is squished between the pipe and the cylinder. I have not ridden the bike after I installed the pipe but am sure it will overheat since water will not circulate properly because of this. I am almost making a dent on the pipe in order to give the hose enough clearance (the 87 pipe already had a factory dent on it for this purpose). Can anyone give me a hint on what else I could do (rather not dent my brand new pipe!). Thanks
Hiya I’ve a 1988 Rm250 ive had years but I’ve no exhaust so I’m interested in one if anyone would be interested in selling a spare one etc. It’s good to no a 1987 one fits as it broadens my search for one so any help would b most greatful. 👍😊
collinsvintage 11/26/2019 6:14am
11/26/2019 6:14am
collinsvintage wrote:
Hi guys. I am new to this forum. I saw some discussions about the 87-88 pipe for the RM250. My bike is an 88 but had...
Hi guys. I am new to this forum. I saw some discussions about the 87-88 pipe for the RM250. My bike is an 88 but had an 87 pipe on it which fit perfectly. I then decided to buy an 88 pipe for it since the rest of the bike is 100% original. I ended up buying an 88 DG pipe (brand new old stock) which fits perfectly too except for the radiator hose which is squished between the pipe and the cylinder. I have not ridden the bike after I installed the pipe but am sure it will overheat since water will not circulate properly because of this. I am almost making a dent on the pipe in order to give the hose enough clearance (the 87 pipe already had a factory dent on it for this purpose). Can anyone give me a hint on what else I could do (rather not dent my brand new pipe!). Thanks
N.Robo wrote:
Hiya I’ve a 1988 Rm250 ive had years but I’ve no exhaust so I’m interested in one if anyone would be interested in selling a spare...
Hiya I’ve a 1988 Rm250 ive had years but I’ve no exhaust so I’m interested in one if anyone would be interested in selling a spare one etc. It’s good to no a 1987 one fits as it broadens my search for one so any help would b most greatful. 👍😊
I have a DG pipe that will fit your 88 RM if you’re interested.
1
N.Robo
Profile picture for user N.Robo
Posts
3
Joined
11/25/2019
Location
GB
N.Robo 11/26/2019 6:46am
11/26/2019 6:46am
collinsvintage wrote:
Hi guys. I am new to this forum. I saw some discussions about the 87-88 pipe for the RM250. My bike is an 88 but had...
Hi guys. I am new to this forum. I saw some discussions about the 87-88 pipe for the RM250. My bike is an 88 but had an 87 pipe on it which fit perfectly. I then decided to buy an 88 pipe for it since the rest of the bike is 100% original. I ended up buying an 88 DG pipe (brand new old stock) which fits perfectly too except for the radiator hose which is squished between the pipe and the cylinder. I have not ridden the bike after I installed the pipe but am sure it will overheat since water will not circulate properly because of this. I am almost making a dent on the pipe in order to give the hose enough clearance (the 87 pipe already had a factory dent on it for this purpose). Can anyone give me a hint on what else I could do (rather not dent my brand new pipe!). Thanks
N.Robo wrote:
Hiya I’ve a 1988 Rm250 ive had years but I’ve no exhaust so I’m interested in one if anyone would be interested in selling a spare...
Hiya I’ve a 1988 Rm250 ive had years but I’ve no exhaust so I’m interested in one if anyone would be interested in selling a spare one etc. It’s good to no a 1987 one fits as it broadens my search for one so any help would b most greatful. 👍😊
collinsvintage wrote:
I have a DG pipe that will fit your 88 RM if you’re interested.
Hiya yes I’d be interested for my 88 Rm250 please.
CodyMX4ever
Profile picture for user CodyMX4ever
Posts
21
Joined
2/3/2015
Location
Ironton, OH US
CodyMX4ever 1/19/2022 4:33pm
1/19/2022 4:33pm
collinsvintage wrote:
Hi guys. I am new to this forum. I saw some discussions about the 87-88 pipe for the RM250. My bike is an 88 but had...
Hi guys. I am new to this forum. I saw some discussions about the 87-88 pipe for the RM250. My bike is an 88 but had an 87 pipe on it which fit perfectly. I then decided to buy an 88 pipe for it since the rest of the bike is 100% original. I ended up buying an 88 DG pipe (brand new old stock) which fits perfectly too except for the radiator hose which is squished between the pipe and the cylinder. I have not ridden the bike after I installed the pipe but am sure it will overheat since water will not circulate properly because of this. I am almost making a dent on the pipe in order to give the hose enough clearance (the 87 pipe already had a factory dent on it for this purpose). Can anyone give me a hint on what else I could do (rather not dent my brand new pipe!). Thanks
N.Robo wrote:
Hiya I’ve a 1988 Rm250 ive had years but I’ve no exhaust so I’m interested in one if anyone would be interested in selling a spare...
Hiya I’ve a 1988 Rm250 ive had years but I’ve no exhaust so I’m interested in one if anyone would be interested in selling a spare one etc. It’s good to no a 1987 one fits as it broadens my search for one so any help would b most greatful. 👍😊
collinsvintage wrote:
I have a DG pipe that will fit your 88 RM if you’re interested.
Pipe still available? Anybody have a 1988 rm250 pipe?
collinsvintage 1/19/2022 4:49pm
1/19/2022 4:49pm
N.Robo wrote:
Hiya I’ve a 1988 Rm250 ive had years but I’ve no exhaust so I’m interested in one if anyone would be interested in selling a spare...
Hiya I’ve a 1988 Rm250 ive had years but I’ve no exhaust so I’m interested in one if anyone would be interested in selling a spare one etc. It’s good to no a 1987 one fits as it broadens my search for one so any help would b most greatful. 👍😊
collinsvintage wrote:
I have a DG pipe that will fit your 88 RM if you’re interested.
CodyMX4ever wrote:
Pipe still available? Anybody have a 1988 rm250 pipe?
Yes, still have it!
CodyMX4ever
Profile picture for user CodyMX4ever
Posts
21
Joined
2/3/2015
Location
Ironton, OH US
CodyMX4ever 1/20/2022 11:17am
1/20/2022 11:17am
collinsvintage wrote:
I have a DG pipe that will fit your 88 RM if you’re interested.
CodyMX4ever wrote:
Pipe still available? Anybody have a 1988 rm250 pipe?
collinsvintage wrote:
Yes, still have it!
I'll take it, do you have a PayPal address?
CodyMX4ever
Profile picture for user CodyMX4ever
Posts
21
Joined
2/3/2015
Location
Ironton, OH US
CodyMX4ever 1/21/2022 5:31am
1/21/2022 5:31am
Anyone with a pipe, anyone?
sandman768
Profile picture for user sandman768
Posts
7960
Joined
3/21/2014
Location
Saratoga Springs, NY US
sandman768 1/21/2022 5:48am
1/21/2022 5:48am
CodyMX4ever wrote:
Anyone with a pipe, anyone?
The 88 250 pipe is very rare, Look at the Facebook group for 84-88 RM”s, I believe a few guys making cone pipes from the UK or Holland maybe. Won’t be cheap, but they are works of art. Here is a photo of my 88 with a raw PC pipe on it 👍
2
CodyMX4ever
Profile picture for user CodyMX4ever
Posts
21
Joined
2/3/2015
Location
Ironton, OH US
CodyMX4ever 1/21/2022 8:32am
1/21/2022 8:32am
CodyMX4ever wrote:
Anyone with a pipe, anyone?
sandman768 wrote:
The 88 250 pipe is very rare, Look at the Facebook group for 84-88 RM”s, I believe a few guys making cone pipes from the UK...
The 88 250 pipe is very rare, Look at the Facebook group for 84-88 RM”s, I believe a few guys making cone pipes from the UK or Holland maybe. Won’t be cheap, but they are works of art. Here is a photo of my 88 with a raw PC pipe on it 👍
thanks...…….and nice bike.

Pit Row

See All »
CodyMX4ever
Profile picture for user CodyMX4ever
Posts
21
Joined
2/3/2015
Location
Ironton, OH US
CodyMX4ever 1/21/2022 2:18pm
1/21/2022 2:18pm
collinsvintage wrote:
I have a DG pipe that will fit your 88 RM if you’re interested.
CodyMX4ever wrote:
Pipe still available? Anybody have a 1988 rm250 pipe?
collinsvintage wrote:
Yes, still have it!
Sell or not?
quiknic
Profile picture for user quiknic
Posts
843
Joined
11/30/2008
Location
Santa Clarita, CA US
Fantasy
820th
quiknic 1/21/2022 3:47pm
1/21/2022 3:47pm
CodyMX4ever wrote:
Anyone with a pipe, anyone?
I have a DG pipe and I think silencer that was on my 88 RM250 if you were interested.

I am actually having a couple of cone pipes made for the 88 right now and hoping to have them in the next month. They are damn expensive and take a long time to get, should be well worth the cost and time once I get them.

I will post some pictures of the new pipe once they have arrived.
CodyMX4ever
Profile picture for user CodyMX4ever
Posts
21
Joined
2/3/2015
Location
Ironton, OH US
CodyMX4ever 1/21/2022 7:55pm
1/21/2022 7:55pm
CodyMX4ever wrote:
Anyone with a pipe, anyone?
quiknic wrote:
I have a DG pipe and I think silencer that was on my 88 RM250 if you were interested. I am actually having a couple of...
I have a DG pipe and I think silencer that was on my 88 RM250 if you were interested.

I am actually having a couple of cone pipes made for the 88 right now and hoping to have them in the next month. They are damn expensive and take a long time to get, should be well worth the cost and time once I get them.

I will post some pictures of the new pipe once they have arrived.
If the DG is in good condition, I will buy it
collinsvintage 1/21/2022 8:11pm
1/21/2022 8:11pm
CodyMX4ever wrote:
Pipe still available? Anybody have a 1988 rm250 pipe?
collinsvintage wrote:
Yes, still have it!
CodyMX4ever wrote:
Sell or not?
Hi Cody, I was travelling, sorry for my late reply. Yes, it is yours. What is your email address so I can send you some pictures?
quiknic
Profile picture for user quiknic
Posts
843
Joined
11/30/2008
Location
Santa Clarita, CA US
Fantasy
820th
quiknic 1/21/2022 9:40pm
1/21/2022 9:40pm
CodyMX4ever wrote:
If the DG is in good condition, I will buy it
Here is the system that I have. One tiny ding on the lower side that I have circled. Other than that it is in excellent shape and has minimal use.










CodyMX4ever
Profile picture for user CodyMX4ever
Posts
21
Joined
2/3/2015
Location
Ironton, OH US
CodyMX4ever 1/22/2022 8:02am
1/22/2022 8:02am
CodyMX4ever wrote:
If the DG is in good condition, I will buy it
quiknic wrote:
Here is the system that I have. One tiny ding on the lower side that I have circled. Other than that it is in excellent shape...
Here is the system that I have. One tiny ding on the lower side that I have circled. Other than that it is in excellent shape and has minimal use.










Thanks, how much?
CodyMX4ever
Profile picture for user CodyMX4ever
Posts
21
Joined
2/3/2015
Location
Ironton, OH US
CodyMX4ever 1/22/2022 8:03am
1/22/2022 8:03am
collinsvintage wrote:
Yes, still have it!
CodyMX4ever wrote:
Sell or not?
collinsvintage wrote:
Hi Cody, I was travelling, sorry for my late reply. Yes, it is yours. What is your email address so I can send you some pictures?
Please send them to 740 442 3910, how much?
quiknic
Profile picture for user quiknic
Posts
843
Joined
11/30/2008
Location
Santa Clarita, CA US
Fantasy
820th
quiknic 1/23/2022 2:24pm
1/23/2022 2:24pm
CodyMX4ever wrote:
Thanks, how much?
$500 for the pipe and silencer shipped in the lower 48.
CodyMX4ever
Profile picture for user CodyMX4ever
Posts
21
Joined
2/3/2015
Location
Ironton, OH US
CodyMX4ever 1/23/2022 4:07pm
1/23/2022 4:07pm
I bought the pipe from Collinsvintage, thanks everyone.
007rm250
Profile picture for user 007rm250
Posts
8
Joined
5/29/2024
Location
Ottawa, ON CA
007rm250 12/24/2024 3:51pm
12/24/2024 3:51pm

Hey guys, I have a pro circuit pipe for an 88 rm250. Throw me a price

sandman768
Profile picture for user sandman768
Posts
7960
Joined
3/21/2014
Location
Saratoga Springs, NY US
sandman768 12/24/2024 7:27pm
12/24/2024 7:27pm
007rm250 wrote:
Hey guys, I have a pro circuit pipe for an 88 rm250. Throw me a price

Hey guys, I have a pro circuit pipe for an 88 rm250. Throw me a price

Photos please

007rm250
Profile picture for user 007rm250
Posts
8
Joined
5/29/2024
Location
Ottawa, ON CA
007rm250 12/24/2024 10:28pm
12/24/2024 10:28pm

Post a reply to: 1988 RM250 DG pipe with no dent for radiator hose