20 vs 22mm offset Austrian bikes

yz133rider
Profile picture for user yz133rider
Posts
5027
Joined
8/1/2013
Location
Avondale, PA, USA
yz133rider
Anyone experiment much with the different offsets?
Just ordered factory gasgas split clamps for the more positive front end feel.

I want less push and less vague in the corners.
|
Bruce372
Profile picture for user Bruce372
Posts
6329
Joined
4/1/2008
Location
USA
Bruce372 12/17/2021 8:05am
12/17/2021 8:05am
So this can be done with the factory edition split clamps?

When you do the work, can you take a few how to pics please?
yz133rider
Profile picture for user yz133rider
Posts
5027
Joined
8/1/2013
Location
Avondale, PA, USA
yz133rider 12/17/2021 8:24am
12/17/2021 8:24am
Bruce372 wrote:
So this can be done with the factory edition split clamps?

When you do the work, can you take a few how to pics please?
Sure I’ll take some pics.

Looks like they come with the stem and bearing already installed so should drop right on besides swapping over the bar mounts and controls will be the most tedious part.
mxryan25
Profile picture for user mxryan25
Posts
176
Joined
11/27/2018
Location
Dayton, OH, USA
mxryan25 12/17/2021 8:41am
12/17/2021 8:41am
Maybe it’ll give you what you’re looking for but I tried 20mm and was not a fan. It’s very simply to do, unthread the nut on the bottom of the bottom clamp which allows it to separate from the stem, then rotate the stem 180° and reinstall
1
yz133rider
Profile picture for user yz133rider
Posts
5027
Joined
8/1/2013
Location
Avondale, PA, USA
yz133rider 12/17/2021 8:46am
12/17/2021 8:46am
mxryan25 wrote:
Maybe it’ll give you what you’re looking for but I tried 20mm and was not a fan. It’s very simply to do, unthread the nut on...
Maybe it’ll give you what you’re looking for but I tried 20mm and was not a fan. It’s very simply to do, unthread the nut on the bottom of the bottom clamp which allows it to separate from the stem, then rotate the stem 180° and reinstall
What did you feel? What’s your style, speed, tracks etc?

The Shop

See All »
Bruce372
Profile picture for user Bruce372
Posts
6329
Joined
4/1/2008
Location
USA
Bruce372 12/17/2021 8:53am
12/17/2021 8:53am
mxryan25 wrote:
Maybe it’ll give you what you’re looking for but I tried 20mm and was not a fan. It’s very simply to do, unthread the nut on...
Maybe it’ll give you what you’re looking for but I tried 20mm and was not a fan. It’s very simply to do, unthread the nut on the bottom of the bottom clamp which allows it to separate from the stem, then rotate the stem 180° and reinstall
Can it be done on the bike?
murph783
Profile picture for user murph783
Posts
1355
Joined
3/2/2011
Location
USA
murph783 12/17/2021 9:07am
12/17/2021 9:07am
Coming from a yamaha, but offset is offset, I made that change-to 20mm from stock which is either 22 or 22.5 I believe. Did exactly what you’re saying you want it to. Gets a little twitchy but I’m happy with the trade off
mxryan25
Profile picture for user mxryan25
Posts
176
Joined
11/27/2018
Location
Dayton, OH, USA
mxryan25 12/17/2021 9:08am
12/17/2021 9:08am
Bruce372 wrote:
Can it be done on the bike?
Yes

The front end felt heavy and more twitchy, which even with the standard offset the Austrian bikes don’t have the most stable front end feel. Flat corners were noticeably worse, rutted turns felt fine but not really any better than stock. Also made the front end/chassis feel a little more rigid. I ride local A, only rode it one day at soggy bottom mx in KY, tighter, rutty clay based track
mxryan25
Profile picture for user mxryan25
Posts
176
Joined
11/27/2018
Location
Dayton, OH, USA
mxryan25 12/17/2021 9:12am
12/17/2021 9:12am
Are you running the stock forks ? A good spring fork (cone valve, KYB, ohlins) will feel more planted, more plush, and less vague. That’s why I’m back on Japanese bikes Laughing
1
1

Post a reply to: 20 vs 22mm offset Austrian bikes