ISO/WTB: Bill's Silencer for '94 CR125

WRH
Profile picture for user WRH
Posts
191
Joined
5/5/2014
Location
Saraland, AL US
WRH 1/6/2021 11:24am
1/6/2021 11:24am
I would think he still has the stamp for the pipe. If not ask how much for a stamp to be made, then what is the minimum he would build for you and he would still own the stamp. Or you could own the stamp and your in the CR125 pipe sales business all of a sudden. It's only money.
1
sandman768
Profile picture for user sandman768
Posts
7916
Joined
3/21/2014
Location
Saratoga Springs, NY US
sandman768 1/6/2021 11:51am
1/6/2021 11:51am
bills Facebook site posted they are in the process of making pipes for the 02-03 Cr125 with other years coming up... I just don’t get it... why wouldn’t you just blow out 10 pipes at 250-350 each... your going to sell every one of them...
1
WRH
Profile picture for user WRH
Posts
191
Joined
5/5/2014
Location
Saraland, AL US
WRH 1/6/2021 12:35pm
1/6/2021 12:35pm
15 years ago the stamp was $1200.00, if I owned it. The stamped pieces were $100.00, labor to put them together was $130.00.
That's not with the price of the nice silencer, just a functional silencer. Then there is shipping cost. AND... You had to have the pipe to make the stamp from.
My first order was for 125 pipes. The exhaust sold for retail $325.00
However, you go to Taiwann and source out the exhaust the cost was much less per unit. You just needed to buy minimum 500 units.
10 pipes and maybe 900.00 profit. And you sell every one of them.
You still have to pay for the time and materials it takes to box, create a invoice , the credit card fees. etc.
1
hdogg21
Profile picture for user hdogg21
Posts
276
Joined
2/6/2019
Location
Shakopee, MN US
hdogg21 1/7/2021 11:16am
1/7/2021 11:16am
matt.3150 wrote:
Was it these your looking for? [img]https://p.vitalmx.com/photos/forums/2021/01/04/470214/s1200_84FBDD13_E5F8_423F_825E_12CBD1603FBF.jpg[/img] [img]https://p.vitalmx.com/photos/forums/2021/01/04/470215/s1200_79386191_0BAB_44CE_9FB6_4763C0CB85D5.jpg[/img]
Was it these your looking for?





hdogg21 wrote:
If those are for a 1994 Honda CR125 then the answer to your Question is YES SIR!!!
matt.3150 are you selling or teasing ???? I'm ready to buy!!!

The Shop

See All »
llaliberte22 1/7/2021 3:08pm
1/7/2021 3:08pm
hdogg21 wrote:
matt.3150 are you selling or teasing ???? I'm ready to buy!!!
He's always just flexing on everone
3
matt.3150
Profile picture for user matt.3150
Posts
622
Joined
3/20/2015
Location
San Jose, CA US
matt.3150 1/8/2021 11:53am
1/8/2021 11:53am
Sorry I’m not selling because I have an entire 1994 HRC works RC125 I’m building right now, sorry if I got your hopes up, I was showing that there are some pipes out there. A while back I also talked to Bill at Bills pipes and he does not want to make anymore and he does not have the die’s anyway! The die’s cost anywhere for $10000 to $20000. So there not cheap and you have to have allot of pipes to make!
4
matt.3150
Profile picture for user matt.3150
Posts
622
Joined
3/20/2015
Location
San Jose, CA US
matt.3150 1/8/2021 1:38pm
1/8/2021 1:38pm
hdogg21 wrote:
matt.3150 are you selling or teasing ???? I'm ready to buy!!!
llaliberte22 wrote:
He's always just flexing on everone
I find is funny that when I didn’t put up pictures of what I have everyone would bitch and complain that they wanted to see my stuff. When I do then I’m a jerk for it. I guess I’ll just quit show the stuff, it’s not doing me any good.
2
4
llaliberte22 1/8/2021 4:30pm
1/8/2021 4:30pm
Sorry, but that one, especially after the OP who has been searching for months asked other members to move on from his thread if they didn't have what he was looking for and READY TO SELL, just felt like a big "fuck you, I got one and you don't" to him and other who are desperately looking for one.

Perfectly fine to me if you do it in your own build thread, I'll be the first to ask for more. It just looks like you are trying to hi-jack others post and it works because of you have some amazing stuff.

Cheers to a cold one 🍻
3
matt.3150
Profile picture for user matt.3150
Posts
622
Joined
3/20/2015
Location
San Jose, CA US
matt.3150 1/9/2021 12:54pm
1/9/2021 12:54pm
llaliberte22 wrote:
Sorry, but that one, especially after the OP who has been searching for months asked other members to move on from his thread if they didn't...
Sorry, but that one, especially after the OP who has been searching for months asked other members to move on from his thread if they didn't have what he was looking for and READY TO SELL, just felt like a big "fuck you, I got one and you don't" to him and other who are desperately looking for one.

Perfectly fine to me if you do it in your own build thread, I'll be the first to ask for more. It just looks like you are trying to hi-jack others post and it works because of you have some amazing stuff.

Cheers to a cold one 🍻
Well it is an open forum, people put stuff up all the time. I guess I’m getting a ticket from the open forum police!😃
I get stuff all the time on forum that I started, but it is what it is. Open!
5
swodown348
Profile picture for user swodown348
Posts
112
Joined
3/23/2016
Location
Escondido, CA US
swodown348 1/12/2021 12:22pm
1/12/2021 12:22pm
hdogg21 wrote:
I know right...

That would be awesome! Plz let me know, thx!
swodown348 wrote:
Just took a look and unfortunately the pipe appears to be for a KX. Sorry for the false alarm.
Purging the garage today and I found a box I wasn’t too sure what was in it. Turns out it had a nickel plated Bill’s Pipe for 90-97 CR125. Let me know if you’re interested.


2
hdogg21
Profile picture for user hdogg21
Posts
276
Joined
2/6/2019
Location
Shakopee, MN US
hdogg21 1/12/2021 1:25pm
1/12/2021 1:25pm
swodown348 wrote:
[img]https://p.vitalmx.com/photos/forums/2021/01/12/471932/s1200_01A02E53_DCC0_4DB6_A400_B348634194B5.jpg[/img]Purging the garage today and I found a box I wasn’t too sure what was in it. Turns out it had a nickel plated Bill’s Pipe...
Purging the garage today and I found a box I wasn’t too sure what was in it. Turns out it had a nickel plated Bill’s Pipe for 90-97 CR125. Let me know if you’re interested.


PM sent! Thank you, Jon
JOE_SPROCKETS#1 1/12/2021 2:14pm
1/12/2021 2:14pm
swodown348 wrote:
[img]https://p.vitalmx.com/photos/forums/2021/01/12/471932/s1200_01A02E53_DCC0_4DB6_A400_B348634194B5.jpg[/img]Purging the garage today and I found a box I wasn’t too sure what was in it. Turns out it had a nickel plated Bill’s Pipe...
Purging the garage today and I found a box I wasn’t too sure what was in it. Turns out it had a nickel plated Bill’s Pipe for 90-97 CR125. Let me know if you’re interested.


hdogg21 wrote:
PM sent! Thank you, Jon
If hdog doesn’t want it put me next in line for it please.
Yeti831
Profile picture for user Yeti831
Posts
1348
Joined
1/30/2020
Location
UT US
Yeti831 1/12/2021 4:52pm
1/12/2021 4:52pm
chuckdavies wrote:
I also asked Bills recently via email about 92-97 CR125 pipes and they said no. Shame as they would get so many sales straight off!
hdogg21 wrote:
I did as well...I guess they don't like money haha
Which I don’t get. Not like they throw away the jigs.
1
sandman768
Profile picture for user sandman768
Posts
7916
Joined
3/21/2014
Location
Saratoga Springs, NY US
sandman768 1/12/2021 7:28pm
1/12/2021 7:28pm
Chris99Flannery wrote:
Nice! Dont feel bad but as i just ordered a cone pipe from Holland haha.
JSV?
hdogg21
Profile picture for user hdogg21
Posts
276
Joined
2/6/2019
Location
Shakopee, MN US
hdogg21 1/20/2021 11:56am
1/20/2021 11:56am
Well I’ve found a NOS pipe in Michigan...now I just need a silencer!!! Anyone? LMK thx, Jon
2
matt.3150
Profile picture for user matt.3150
Posts
622
Joined
3/20/2015
Location
San Jose, CA US
matt.3150 1/20/2021 8:56pm
1/20/2021 8:56pm Edited Date/Time 1/20/2021 8:56pm
hdogg21 wrote:
Well I’ve found a NOS pipe in Michigan...now I just need a silencer!!! Anyone? LMK thx, Jon [img]https://p.vitalmx.com/photos/forums/2021/01/20/473911/s1200_1484540E_53C6_4413_95A8_9BEA7328971E.jpg[/img]
Well I’ve found a NOS pipe in Michigan...now I just need a silencer!!! Anyone? LMK thx, Jon
That really great! I’m happy for you now!! I had to wait years and years for certain parts I have, so I know the feeling can be like “ man I’m never going to find one” but usually what happens to me is just when I basically give up , the dam thing shows up! Funny that way !!!! SUPER are you going to keep it nickel or strip it?
1
sandman768
Profile picture for user sandman768
Posts
7916
Joined
3/21/2014
Location
Saratoga Springs, NY US
sandman768 1/21/2021 6:12am
1/21/2021 6:12am
Good find👍 Does anyone have any test/ review”s of which pipe actually performed the best for the 93-97 CR125 ?
1

Pit Row

See All »
kb22
Profile picture for user kb22
Posts
143
Joined
8/5/2020
Location
Knoxville, TN US
kb22 1/21/2021 7:36am
1/21/2021 7:36am
sandman768 wrote:
Good find👍 Does anyone have any test/ review”s of which pipe actually performed the best for the 93-97 CR125 ?
Pretty sure nino did a review, how extensive I’m not sure but he seemed to be all for the messico being the best. Maybe he can chime in if he’s active on these forums. I know he goes over this and the power valve mod extensively on the thumper forums.
hdogg21
Profile picture for user hdogg21
Posts
276
Joined
2/6/2019
Location
Shakopee, MN US
hdogg21 1/21/2021 11:24am
1/21/2021 11:24am
matt.3150 wrote:
That really great! I’m happy for you now!! I had to wait years and years for certain parts I have, so I know the feeling can...
That really great! I’m happy for you now!! I had to wait years and years for certain parts I have, so I know the feeling can be like “ man I’m never going to find one” but usually what happens to me is just when I basically give up , the dam thing shows up! Funny that way !!!! SUPER are you going to keep it nickel or strip it?
Most likely strip it and give it the "Works" look as that's what Doug was running in '94...Do you know of anymore silencers like the Lammy one you have, maybe the guy you bought from has more??? That is what I'm on the hunt for now!!! LMK, thx Jon
matt.3150
Profile picture for user matt.3150
Posts
622
Joined
3/20/2015
Location
San Jose, CA US
matt.3150 1/21/2021 12:17pm
1/21/2021 12:17pm
matt.3150 wrote:
That really great! I’m happy for you now!! I had to wait years and years for certain parts I have, so I know the feeling can...
That really great! I’m happy for you now!! I had to wait years and years for certain parts I have, so I know the feeling can be like “ man I’m never going to find one” but usually what happens to me is just when I basically give up , the dam thing shows up! Funny that way !!!! SUPER are you going to keep it nickel or strip it?
hdogg21 wrote:
Most likely strip it and give it the "Works" look as that's what Doug was running in '94...Do you know of anymore silencers like the Lammy...
Most likely strip it and give it the "Works" look as that's what Doug was running in '94...Do you know of anymore silencers like the Lammy one you have, maybe the guy you bought from has more??? That is what I'm on the hunt for now!!! LMK, thx Jon
I’m sorry that silencer I got was the only one I’ve seen, if you could find a regular Bill’s silencer, you could make one similar.
Tracktor
Profile picture for user Tracktor
Posts
2343
Joined
8/17/2006
Location
The RTF/Amboy, WA US
Tracktor 1/21/2021 2:21pm
1/21/2021 2:21pm
Last time I checked Bills still sold the silencers. I will say a KTM/Husky 125 silencer fits with very little modification. I am running one of my extra PC KTM silencers on my 96 CR125.........
MX-617
Profile picture for user MX-617
Posts
154
Joined
9/6/2019
Location
Birmingham, AL US
MX-617 1/22/2021 5:58pm
1/22/2021 5:58pm
I have a PC silencer pulled from a 94 CR125 if anyone’s interested, it has a dent on the lower tube
MX-617
Profile picture for user MX-617
Posts
154
Joined
9/6/2019
Location
Birmingham, AL US
MX-617 1/23/2021 7:10pm
1/23/2021 7:10pm
JOE_SPROCKETS#1 wrote:
How much?
Make me an offer
hdogg21
Profile picture for user hdogg21
Posts
276
Joined
2/6/2019
Location
Shakopee, MN US
hdogg21 2/9/2021 6:08am
2/9/2021 6:08am
TTT

Who's got a Bill's silencer for a 1994 CR125 laying around collecting dust??? LMK ASAP

Email: hdogg21@live.com

Thank you!!!

Post a reply to: ISO/WTB: Bill's Silencer for '94 CR125