04 cr 250 servo

Mx29
Profile picture for user Mx29
Posts
14
Joined
12/8/2018
Location
NC US
Mx29
Can one of you guys link me to one of those replacement servo motors? Apparently Honda doesn’t sell em anymore and I hear there’s a replacement motor somewhere that I can pop in the case. Thanks ??
|
mxracer666
Profile picture for user mxracer666
Posts
777
Joined
10/28/2010
Location
NE Iowa, IA US
mxracer666 1/14/2019 6:59pm
1/14/2019 6:59pm
I'm very interested in this as well -- are there different servo motors for the different years of the CR250? (02-07)
Mx29
Profile picture for user Mx29
Posts
14
Joined
12/8/2018
Location
NC US
Mx29 1/14/2019 7:05pm
1/14/2019 7:05pm
mxracer666 wrote:
I'm very interested in this as well -- are there different servo motors for the different years of the CR250? (02-07)
I don’t think so. I’m not ? tho
captmoto
Profile picture for user captmoto
Posts
5865
Joined
4/22/2009
Location
Rancho Cucamonga, CA US
captmoto 1/15/2019 2:18pm
1/15/2019 2:18pm
I know thumpertalk sucks and all but search the Honda 2 stroke forum. I think there was something there.
1
omalley
Profile picture for user omalley
Posts
1528
Joined
7/27/2016
Location
Snohomish, WA US
omalley 1/15/2019 10:22pm
1/15/2019 10:22pm
I’ll check when I get up tomorrow (at work right now). I’ve got a couple I picked up from a member here. As memory serves it’s a mabuchi motor (550 or something).
1

The Shop

See All »
labbe001
Profile picture for user labbe001
Posts
94
Joined
11/6/2015
Location
Alabaster, AL US
labbe001 1/18/2019 4:50am
1/18/2019 4:50am
I just had to replace mine with a Mabuchi RS 365 SH. It almost snatched my arms off when I rode the bike for the first time after replacing the servo motor. Apparently it had slowly been going out over time. These motors are really cheap so I went ahead and purchased 2 of them.
It's a pretty simple fix for anyone with some mechanical ability. Be careful when taking the servo cases apart as there are a lot of small parts and pieces that can fall out. You'll need a solder gun as well. I also used some silicone sealant when putting the servo cases back together to help keep water out.
2
Mx29
Profile picture for user Mx29
Posts
14
Joined
12/8/2018
Location
NC US
Mx29 1/18/2019 4:03pm
1/18/2019 4:03pm
labbe001 wrote:
I just had to replace mine with a Mabuchi RS 365 SH. It almost snatched my arms off when I rode the bike for the first...
I just had to replace mine with a Mabuchi RS 365 SH. It almost snatched my arms off when I rode the bike for the first time after replacing the servo motor. Apparently it had slowly been going out over time. These motors are really cheap so I went ahead and purchased 2 of them.
It's a pretty simple fix for anyone with some mechanical ability. Be careful when taking the servo cases apart as there are a lot of small parts and pieces that can fall out. You'll need a solder gun as well. I also used some silicone sealant when putting the servo cases back together to help keep water out.
I was able to locate a new servo off an 05-07. Diff part number but hooks up and operates fine. I did order a motor to fix my existing unit. Cheap price to have a good spare. Thanks everyone
New to -4S-Joe 1/19/2019 12:58pm
1/19/2019 12:58pm
labbe001 wrote:
I just had to replace mine with a Mabuchi RS 365 SH. It almost snatched my arms off when I rode the bike for the first...
I just had to replace mine with a Mabuchi RS 365 SH. It almost snatched my arms off when I rode the bike for the first time after replacing the servo motor. Apparently it had slowly been going out over time. These motors are really cheap so I went ahead and purchased 2 of them.
It's a pretty simple fix for anyone with some mechanical ability. Be careful when taking the servo cases apart as there are a lot of small parts and pieces that can fall out. You'll need a solder gun as well. I also used some silicone sealant when putting the servo cases back together to help keep water out.
Mx29 wrote:
I was able to locate a new servo off an 05-07. Diff part number but hooks up and operates fine. I did order a motor to...
I was able to locate a new servo off an 05-07. Diff part number but hooks up and operates fine. I did order a motor to fix my existing unit. Cheap price to have a good spare. Thanks everyone
Will the newer model servo work on an 2002?
Mx29
Profile picture for user Mx29
Posts
14
Joined
12/8/2018
Location
NC US
Mx29 1/19/2019 10:24pm
1/19/2019 10:24pm
labbe001 wrote:
I just had to replace mine with a Mabuchi RS 365 SH. It almost snatched my arms off when I rode the bike for the first...
I just had to replace mine with a Mabuchi RS 365 SH. It almost snatched my arms off when I rode the bike for the first time after replacing the servo motor. Apparently it had slowly been going out over time. These motors are really cheap so I went ahead and purchased 2 of them.
It's a pretty simple fix for anyone with some mechanical ability. Be careful when taking the servo cases apart as there are a lot of small parts and pieces that can fall out. You'll need a solder gun as well. I also used some silicone sealant when putting the servo cases back together to help keep water out.
Mx29 wrote:
I was able to locate a new servo off an 05-07. Diff part number but hooks up and operates fine. I did order a motor to...
I was able to locate a new servo off an 05-07. Diff part number but hooks up and operates fine. I did order a motor to fix my existing unit. Cheap price to have a good spare. Thanks everyone
New to -4S-Joe wrote:
Will the newer model servo work on an 2002?
I have a 04 and if I recall correctly the 02-04 are a certain part number and 05-07 are a diff one and I used the newer one and it works fine. Same plug and same wires. I don’t see why it wouldn’t.
1
Jake_R72435 8/22/2020 7:16pm
8/22/2020 7:16pm
Mx29 wrote:
I was able to locate a new servo off an 05-07. Diff part number but hooks up and operates fine. I did order a motor to...
I was able to locate a new servo off an 05-07. Diff part number but hooks up and operates fine. I did order a motor to fix my existing unit. Cheap price to have a good spare. Thanks everyone
New to -4S-Joe wrote:
Will the newer model servo work on an 2002?
Mx29 wrote:
I have a 04 and if I recall correctly the 02-04 are a certain part number and 05-07 are a diff one and I used the...
I have a 04 and if I recall correctly the 02-04 are a certain part number and 05-07 are a diff one and I used the newer one and it works fine. Same plug and same wires. I don’t see why it wouldn’t.
Are the mounts the same on it as well?

Post a reply to: 04 cr 250 servo