70s so cal CZ tuners

Edited Date/Time 11/14/2015 7:20pm
Has anybody on here ever heard of a CZ tuner named, and im not sure about the spelling, Chenda Lelyk? Im building a trick CZ with a Boyd and Stelling frame and this badass ported porcupine cylinder and head, which my dad (RIP) raced with in the 70s. The work was done by this czech guy Lelyk but no more Dad to talk about the old days with. I was curious if anyone knew about this tuner ?
|
speedman
Posts
244
Joined
9/11/2010
Location
Houston, TX, USA
11/14/2015 7:53am
Only knew Chenda Lelek's name from ads for "CZ Specialists" Triumph-Suzuki of Pomona: "Engines by Chenda Lelek--Rebuilding and custom porting by a real expert. 25 years in the CZ factory. He knows his stuff!!" I'm not sure I ever saw the story of how Lelek got out from behind the Iron Curtain.

It seems like circa 1971, there were local tuners all around the U. S. who'd started on Hodakas for small-bores or CZs for bigger bikes, and if you saw a really "built" 250/400 locally that actually worked well, it was probably somebody's framer CZ. Although I distinctly remember watching somebody's CZ 400 that probably had an internal rotor ignition bite him good over a small rise on a slippery Sunday morning at Rio Bravo after the 1973 Astrodome short track/TT--bike got light over the rise, wasn't straight, and whipped right out horizontal without apparent whiskey throttle. It was decades before I realized what probably contributed most was a trick ignition--a 4.50 Trelleborg would have been a good idea that day, but people didn't run them much in the area because the local clay turned to hardpack by your second moto, if not sooner.

I'm sure you'll hear more, but you might Google that shop & spelling--
FreshTopEnd
Posts
13350
Joined
8/16/2006
Location
Sacramento, CA, USA
11/14/2015 5:19pm Edited Date/Time 11/14/2015 5:20pm
speedman wrote:
Only knew Chenda Lelek's name from ads for "CZ Specialists" Triumph-Suzuki of Pomona: "Engines by Chenda Lelek--Rebuilding and custom porting by a real expert. 25 years...
Only knew Chenda Lelek's name from ads for "CZ Specialists" Triumph-Suzuki of Pomona: "Engines by Chenda Lelek--Rebuilding and custom porting by a real expert. 25 years in the CZ factory. He knows his stuff!!" I'm not sure I ever saw the story of how Lelek got out from behind the Iron Curtain.

It seems like circa 1971, there were local tuners all around the U. S. who'd started on Hodakas for small-bores or CZs for bigger bikes, and if you saw a really "built" 250/400 locally that actually worked well, it was probably somebody's framer CZ. Although I distinctly remember watching somebody's CZ 400 that probably had an internal rotor ignition bite him good over a small rise on a slippery Sunday morning at Rio Bravo after the 1973 Astrodome short track/TT--bike got light over the rise, wasn't straight, and whipped right out horizontal without apparent whiskey throttle. It was decades before I realized what probably contributed most was a trick ignition--a 4.50 Trelleborg would have been a good idea that day, but people didn't run them much in the area because the local clay turned to hardpack by your second moto, if not sooner.

I'm sure you'll hear more, but you might Google that shop & spelling--
A buddy put one of those button Motoplats on his 72 400. Light switch. On the other hand, the bike he rode immediately before that was a 72 TM400. Which he broke in half, and then bought the CZ. Any way, he ended up for a short bit with a bike that wouldn't break and still lit up like a roman candle.

That was also the bike he taught me to use a clutch on, just before I got a bike myself. What a lot of fun that was.
Tim507
Posts
3491
Joined
6/8/2010
Location
Oregon City, OR, USA
11/14/2015 7:20pm
There is an old time CZ shop in So Cal...Bertus CZ. Bertus was A Factory CZ mechanic and still has connections. He's done a lot of work on my bikes in years past.

CZ28x
Posts
8
Joined
8/23/2016
Location
South Pasadena, CA, USA
8/23/2016 11:41am
I think Chenda built the CZ's that Rex Staten rode

The Shop

speedman
Posts
244
Joined
9/11/2010
Location
Houston, TX, USA
8/23/2016 9:21pm
CZ28x wrote:
I think Chenda built the CZ's that Rex Staten rode
Harry Klemm built the CZs that Staten was riding in 1975, including the one that got both holeshots at the USGP that year. The CZ factory's restrictions on what they could use on that bike probably cost them the race win, and Klemm wouldn't even look at a CZ engine for years. He finally gave in to some vintage CZ owners, and has a really good article on his website that gives some hints as to how he modified Staten's engines, and principles that apply to any 2-stroke.
Klemm Vintage CZ page
Punch line: I suspect Chenda Lelek was the guy who threw the 20-year-old Klemm out of his CZ shop when they disagreed about those principles. Story is at the link.

Post a reply to: 70s so cal CZ tuners

The Latest