17' wp aer 48 forks

Andy_White
Posts
67
Joined
7/27/2016
Location
Fort Wayne, IN, USA
Hey guys, just purchased a 17' ktm 150sx. Have about 3 hours on the bike break in time so far... Loving the power the light bike is making (aside from the $17 plugs) I'm new to air forks so I was generally asking what kind of pressure you guys run. I'm about 5'8 163, intermediate rider (b). So far the forks feel awesome to me, just came off a 11 yzf40 and I'm really happy with the new bike. Just trying to tweak a few things to my personal riding style
|
mxb2
Posts
22422
Joined
6/15/2010
Location
Bowie, MD, USA
7/28/2016 8:11am
Manual have any info? Or contact a suspension company. Factory connection has good settings for that fork.
sandman768
Posts
8311
Joined
3/21/2014
Location
Saratoga Springs, NY, USA
7/28/2016 9:25am
Put a rubber o ring on one of the fork tubes, set standard air pressure, ride, monitor where oring ends up, you want oring to be about 1.5 inches from bottom of tube. If higher, less air, lower, add air. When you get consistent 1.5 inches then fine tune with comp & rebound. Read 16.5 FE post, I think same forks. The best psi for me is 145.
seth505
Posts
10242
Joined
4/1/2008
Location
SD, CA, USA
7/28/2016 9:43am Edited Date/Time 7/29/2016 6:45am
I had read in the ballpark of 148 psi
*edit* Opps sorry, I misread on it being a 150!
Andy_White
Posts
67
Joined
7/27/2016
Location
Fort Wayne, IN, USA
7/28/2016 12:07pm
Thanks guys appreciate it. I'll try the rubber o ring when I get home to do some testing. I put the pump to it this morning and it was reading 127 so I pumped her up to about 140 so we will see what kind of a difference that makes

The Shop

CarlinoJoeVideo
Posts
7516
Joined
11/30/2013
Location
Portland/Los Angeles, CA, USA
7/28/2016 12:37pm
Just remember the air is to set the equivalent of your "spring". The rest of the changes you do with clickers. You don't need to be going crazy with changing pressures because you would be out there changing springs all day.
slipdog
Posts
10054
Joined
7/25/2009
Location
Nor Cal, CA, USA
7/28/2016 1:19pm
Manual calls for 119psi
Andy_White
Posts
67
Joined
7/27/2016
Location
Fort Wayne, IN, USA
7/28/2016 4:01pm
Wow, I must have been way off from the posts I've read the air range has been from 138-152.
119 seems low, I have the manual just out of town and not at hand right now. I'm just trying to get a
Happy medium onto what people are actually running so I can start playing with my clicker settings.

tdrewk
Posts
12
Joined
3/16/2009
Location
Mount Pleasant, SC, USA
7/28/2016 4:54pm
Andy_White wrote:
Wow, I must have been way off from the posts I've read the air range has been from 138-152. 119 seems low, I have the manual...
Wow, I must have been way off from the posts I've read the air range has been from 138-152.
119 seems low, I have the manual just out of town and not at hand right now. I'm just trying to get a
Happy medium onto what people are actually running so I can start playing with my clicker settings.

Anything over 135-138 most likely would not apply to the 150. 119 does seem plausible, though as I mentioned in the PM I'm thinking you'll end up in between 125-135.

As suggested by Sandman768, use an o-ring or zip tye on your forks to measure the fork travel, it'll be your best indicator.
Andy_White
Posts
67
Joined
7/27/2016
Location
Fort Wayne, IN, USA
7/28/2016 5:17pm
Thank you! Sorry for some reason my pm's aren't notifying me when someone replys
Appreciate the help guys
slipdog
Posts
10054
Joined
7/25/2009
Location
Nor Cal, CA, USA
7/28/2016 5:42pm


slipdog
Posts
10054
Joined
7/25/2009
Location
Nor Cal, CA, USA
7/28/2016 5:46pm
This is from the '16 Europe manual because they don't have '17 online yet, but the Husky has the same recommendations in their '17 manual online. Not saying that's the best, just where they are stock.
mxb2
Posts
22422
Joined
6/15/2010
Location
Bowie, MD, USA
7/28/2016 8:22pm
slipdog wrote:
[img]https://p.vitalmx.com/photos/forums/2016/07/28/145009/s1200_Screenshot_2016_07_28_at_1.21.13_PM.jpg[/img]


U have that spec sheet by any chance for a 16fe450. 6 2 , 225.weight Rider ,mx
slipdog
Posts
10054
Joined
7/25/2009
Location
Nor Cal, CA, USA
7/28/2016 8:42pm
mxb2 wrote:
U have that spec sheet by any chance for a 16fe450. 6 2 , 225.weight Rider ,mx
'16 KTM and '17 Husky call for 157 in the 450, but I have no conversion chart for different weight. Still waiting for my TC250 to start testing so I can figure out settings and pressure changes.
mxb2
Posts
22422
Joined
6/15/2010
Location
Bowie, MD, USA
7/28/2016 8:54pm
mxb2 wrote:
U have that spec sheet by any chance for a 16fe450. 6 2 , 225.weight Rider ,mx
slipdog wrote:
'16 KTM and '17 Husky call for 157 in the 450, but I have no conversion chart for different weight. Still waiting for my TC250 to...
'16 KTM and '17 Husky call for 157 in the 450, but I have no conversion chart for different weight. Still waiting for my TC250 to start testing so I can figure out settings and pressure changes.
Thanks slipdog.
8/3/2016 1:48pm
Hello,

Im a suspension specialist from Spain.
I work on a lot of aer forks.
It s very important revalving this fork. I made othe air chamber for control the bottoms and made a other rebound piston with a rebound shim stack.
Its a great fork.

Sorry my bad english!
809
Posts
350
Joined
6/2/2014
Location
Paducah, KY, USA
8/4/2016 6:54am
There is some good info on KTM talk about this fork. I started a mid valve thread over there with good info if you do your own valving. I am currently running 133 psi with some valving changes. That is for 145 lbs riding mx.
slipdog
Posts
10054
Joined
7/25/2009
Location
Nor Cal, CA, USA
8/4/2016 7:04am
809 wrote:
There is some good info on KTM talk about this fork. I started a mid valve thread over there with good info if you do your...
There is some good info on KTM talk about this fork. I started a mid valve thread over there with good info if you do your own valving. I am currently running 133 psi with some valving changes. That is for 145 lbs riding mx.
You have a link for those that don't KTM talk? What model bike are you on?

I rode the 150, 250 and 350f at a demo Monday and assuming all were set according to the '17 OEM spec, all 3 forks felt soft and mushy.
8/4/2016 9:31am
Have fun installing that o ring lol.. Use a zip tie instead..

Post a reply to: 17' wp aer 48 forks

The Latest