All Balls bearings??

Kyriazis298
Profile picture for user Kyriazis298
Posts
759
Joined
6/1/2014
Location
CA
Kyriazis298
Edited Date/Time 11/14/2014 8:26am
Are they good quality?

Thinking of buying the crank bearings and all other bearings for the bike.. OEM are backordered and i need them soon

Also how are the hot rods tranny bearings??
|
Olson
Profile picture for user Olson
Posts
4605
Joined
4/14/2012
Location
SE
Olson 11/13/2014 5:49pm
11/13/2014 5:49pm
Wait for the OEM.
queen of spodes 11/13/2014 6:01pm
11/13/2014 6:01pm
I used All Balls for swingarm & linkage bearings. Did not trust them for engine bearings.. OEM in the engine.
bradmx421
Profile picture for user bradmx421
Posts
1673
Joined
1/9/2010
Location
Riverside, CA, USA
bradmx421 11/13/2014 6:02pm
11/13/2014 6:02pm
I am very familiar with them, they are good quality bearings....for wheels, linkage, shocks, swingarms.

But I would recommend staying with OEM for every bearing inside your motor.(unless your upgrading to roller bearings, which are still KTM OEM technically)
JBernard_401
Profile picture for user JBernard_401
Posts
1317
Joined
10/29/2013
Location
Boulder, CO, USA
JBernard_401 11/13/2014 6:06pm
11/13/2014 6:06pm
i want to so All Balls are KML bearings. so they arent that bad. but for internal i'd go OEM

The Shop

See All »
SteveB
Profile picture for user SteveB
Posts
20
Joined
11/13/2014
Location
AU
SteveB 11/13/2014 6:21pm
11/13/2014 6:21pm
Hey all, first post.

I actually purchased All Balls crank bearnings for my 06 Kx250F from Rocky Mountain a few months ago, and they turned out to be the same brand of bearing as the OEM part I was replacing.

Cheers
Steve
me_da_racer
Profile picture for user me_da_racer
Posts
264
Joined
12/3/2013
Location
Chandler, TX, USA
me_da_racer 11/13/2014 6:32pm
11/13/2014 6:32pm
Hotrod has good crank bearing at a good price.
Ross_McWatters 11/13/2014 6:50pm
11/13/2014 6:50pm
I have had bad experiences with the Hot Rods main bearing, H had been fitting them for a couple of years and then they stopped coming with Japanese bearing and started to come with "Hot Rods' lasered into the them ...then they started to fail quite quickly. We had 2 bikes go in quick time (under 5 hours) and caused a lot of drama and expense. Hot rod's importer here did nothing for us. Stick to OEM!



Kyriazis298
Profile picture for user Kyriazis298
Posts
759
Joined
6/1/2014
Location
CA
Kyriazis298 11/13/2014 7:29pm
11/13/2014 7:29pm
me_da_racer wrote:
Hotrod has good crank bearing at a good price.
I refuse to use the hotrods crank bearings, they are made in taiwan but i hear the tranny bearings are made in japan so just wanted to know
lostboy819
Profile picture for user lostboy819
Posts
12803
Joined
8/16/2006
Location
Blk Forest, CO, USA
lostboy819 11/13/2014 8:01pm
11/13/2014 8:01pm Edited Date/Time 11/13/2014 8:01pm
..........
lostboy819
Profile picture for user lostboy819
Posts
12803
Joined
8/16/2006
Location
Blk Forest, CO, USA
lostboy819 11/13/2014 8:02pm
11/13/2014 8:02pm
PTshox
Profile picture for user PTshox
Posts
1597
Joined
10/1/2011
Location
Highland Village, TX, USA
PTshox 11/13/2014 8:18pm
11/13/2014 8:18pm
OEM are most likely NSK bearings for Japanese bikes. NSK and Timken are probably the best bearings companies in the world. There is a lot of technology used to make these products.

I was at one point in my life involved with mfg/selling the vibration equipment used to monitor and test the bearings both during the mfg process and in the field. Some of these vibration monitors went on to large machines that if they tossed a bearing it was millions to fix. Thus they would monitor the bearings vibration rates and so they cold tell before there was a failure that they needed to be replaced. Timken was a large customer of ours. What we sold them was all used to monitor the testing/QA process to see if they were smooth bearings or not.

Like the others said before me: stick to the OEM bearings for internal engine stuff. They are very good bearings and it's not worth the risk to try something that's maybe a little cheaper. Blown engines are expensive and time consuming to fix!
malachi177
Profile picture for user malachi177
Posts
2281
Joined
12/18/2010
Location
B.C., BC, CA
malachi177 11/13/2014 8:36pm
11/13/2014 8:36pm Edited Date/Time 11/13/2014 8:38pm
I'm running Hotrods cranks in both my RM's. Been two years so far, no issues. They're not crap.
bvm111
Profile picture for user bvm111
Posts
10190
Joined
7/1/2008
Location
Las Vegas, NV, USA
bvm111 11/13/2014 8:37pm
11/13/2014 8:37pm
lostboy819 wrote:
Needed a good laugh tonight.... This is probably my all time favorite movie and can quote almost the entire script'

Preferable prestone.... No....Make that Quaker state

I have the the all balls in my linkage and everything seemed equal to OEM. I agree with everyone else on the internal bearings and would only use OEM inside the engine!
JBernard_401
Profile picture for user JBernard_401
Posts
1317
Joined
10/29/2013
Location
Boulder, CO, USA
JBernard_401 11/13/2014 8:48pm
11/13/2014 8:48pm
PTshox wrote:
OEM are most likely NSK bearings for Japanese bikes. NSK and Timken are probably the best bearings companies in the world. There is a lot of...
OEM are most likely NSK bearings for Japanese bikes. NSK and Timken are probably the best bearings companies in the world. There is a lot of technology used to make these products.

I was at one point in my life involved with mfg/selling the vibration equipment used to monitor and test the bearings both during the mfg process and in the field. Some of these vibration monitors went on to large machines that if they tossed a bearing it was millions to fix. Thus they would monitor the bearings vibration rates and so they cold tell before there was a failure that they needed to be replaced. Timken was a large customer of ours. What we sold them was all used to monitor the testing/QA process to see if they were smooth bearings or not.

Like the others said before me: stick to the OEM bearings for internal engine stuff. They are very good bearings and it's not worth the risk to try something that's maybe a little cheaper. Blown engines are expensive and time consuming to fix!
1. SKF Explorer
2, SKF Standard
3. NSK
4. OEM



Kyriazis298
Profile picture for user Kyriazis298
Posts
759
Joined
6/1/2014
Location
CA
Kyriazis298 11/13/2014 9:04pm
11/13/2014 9:04pm
malachi177 wrote:
I'm running Hotrods cranks in both my RM's. Been two years so far, no issues. They're not crap.
I run hotrod cranks, not there bearings.
Olson
Profile picture for user Olson
Posts
4605
Joined
4/14/2012
Location
SE
Olson 11/13/2014 9:39pm
11/13/2014 9:39pm
Svenska Kullagerfabriken all the way.
BAMX
Profile picture for user BAMX
Posts
2905
Joined
1/22/2012
Location
Fallbrook, CA, USA
BAMX 11/13/2014 10:33pm
11/13/2014 10:33pm Edited Date/Time 11/13/2014 10:38pm
Hot rod crank and bearings in my 125 for 2 years with no issues. OEM is better though IMO. I have used the All Ball kits for steering and linkage with no issues but I don't think that I would go with them inside the motor. There should be a number etched into the side of the bearing that you can cross at a bearing supply. Also, just because bearings are made in Taiwan, they aren't necessarily bad. Big companies like SKF, make their bearings all over the world. It is about who makes them not where.

Pit Row

See All »
GeorgiePorgie
Profile picture for user GeorgiePorgie
Posts
8379
Joined
3/4/2012
Location
USA
GeorgiePorgie 11/13/2014 10:36pm
11/13/2014 10:36pm
Olson wrote:
Wait for the OEM.
Staples button. That was easy.
Deetsmx
Profile picture for user Deetsmx
Posts
888
Joined
4/21/2008
Location
Visalia, CA, USA
Deetsmx 11/13/2014 11:14pm
11/13/2014 11:14pm
I'm laying here with a cracked fibula thanks to aftermarket crank bearings. Not going to name the brand, but stick to oem.
Frodad78
Profile picture for user Frodad78
Posts
2156
Joined
1/11/2012
Location
USA
Frodad78 11/14/2014 5:16am
11/14/2014 5:16am
used them in my stem and linkage bearings 2 years ago, no issues to report.
O___o
Profile picture for user O___o
Posts
730
Joined
9/25/2014
Location
CA
O___o 11/14/2014 5:26am
11/14/2014 5:26am
I don't contribute to China's economy. It's expensive, and requires patience, but I sleep better at night.

All Balls, Tusk, Bike Master, and numerous others can all eat a dick.
resetjet
Profile picture for user resetjet
Posts
2560
Joined
3/16/2012
Location
Tampa, FL, USA
resetjet 11/14/2014 5:27am
11/14/2014 5:27am
I used the all balls in my KTM 200.....No problems after 100 hours or so.
pete24
Profile picture for user pete24
Posts
2733
Joined
10/20/2011
Location
Marlborough, MA, USA
pete24 11/14/2014 6:37am
11/14/2014 6:37am
call world wide bearings. com and get ceramic bearings for everything, they will cost you 5 times what everything else cost, but they are the best
Kyriazis298
Profile picture for user Kyriazis298
Posts
759
Joined
6/1/2014
Location
CA
Kyriazis298 11/14/2014 8:04am
11/14/2014 8:04am
pete24 wrote:
call world wide bearings. com and get ceramic bearings for everything, they will cost you 5 times what everything else cost, but they are the best
So your saying i can change all my bearings 5 times before the ceramic bearings pay off? i wont have the bike in 5 bearing changes lol..
O___o
Profile picture for user O___o
Posts
730
Joined
9/25/2014
Location
CA
O___o 11/14/2014 8:15am
11/14/2014 8:15am
pete24 wrote:
call world wide bearings. com and get ceramic bearings for everything, they will cost you 5 times what everything else cost, but they are the best
Kyriazis298 wrote:
So your saying i can change all my bearings 5 times before the ceramic bearings pay off? i wont have the bike in 5 bearing changes...
So your saying i can change all my bearings 5 times before the ceramic bearings pay off? i wont have the bike in 5 bearing changes lol..
what he is saying is that you wont get the reduction of drivetrain loss and peace of mind with those chinese bearings.


if All Balls and Pivot Works made an airplane, would you fly in it?

Tusk Airlines, bro.
Kyriazis298
Profile picture for user Kyriazis298
Posts
759
Joined
6/1/2014
Location
CA
Kyriazis298 11/14/2014 8:26am
11/14/2014 8:26am
pete24 wrote:
call world wide bearings. com and get ceramic bearings for everything, they will cost you 5 times what everything else cost, but they are the best
Kyriazis298 wrote:
So your saying i can change all my bearings 5 times before the ceramic bearings pay off? i wont have the bike in 5 bearing changes...
So your saying i can change all my bearings 5 times before the ceramic bearings pay off? i wont have the bike in 5 bearing changes lol..
O___o wrote:
what he is saying is that you wont get the reduction of drivetrain loss and peace of mind with those chinese bearings. if All Balls and...
what he is saying is that you wont get the reduction of drivetrain loss and peace of mind with those chinese bearings.


if All Balls and Pivot Works made an airplane, would you fly in it?

Tusk Airlines, bro.
I ordered all OEM stuff yesturday so just waiting now..

And i dont think many factory teams use these worldwidebearings that cost 5 times what oem costs lol i know for a fact Geico honda uses OEM, ive seen the inside of 2 of there motors ;D

Post a reply to: All Balls bearings??