Dual Mufflers on a 2 stroke

scooter5002
Posts
4748
Joined
6/6/2010
Location
Nanton Alberta, CA
10/27/2014 10:20pm Edited Date/Time 10/27/2014 10:20pm
You have to understand, the entire exhaust, including the silencer, is a tuned component. It affects how the 2 stroke operates, and adding an extra silencer will destroy the characteristics of the pipe. They work in conjunction with one another, and unless you are a veteran engine tuner, with a thorough knowledge of how all components work together, you'll go backwards. I appreciate the fact you have a dream, I had one too. I wanted a 500AF, and you can see how that worked out. Save yourself a lot of heartache, don't waste your time or money, and quit while you're ahead.
GeorgiePorgie
Posts
8379
Joined
3/4/2012
Location
USA
10/27/2014 10:33pm Edited Date/Time 10/27/2014 10:34pm
reded wrote:
Just to get you up to date on things..... Dual exhaust on a motocross bike is stupid for many reasons. 1. It's fuckin ugly. 2. It's...
Just to get you up to date on things.....

Dual exhaust on a motocross bike is stupid for many reasons.

1. It's fuckin ugly.
2. It's twice as heavy.
3. It's twice as much shit to tear up in a crash.
4. Unless your RM125 is pre 1989, the silencer should be barely visible past the side cover.
5. You'll likely end up with a bike that runs worse than it currently does.

Worry about your riding skills more and the number of pipes less, you'll thank me later.
1.Its looks bad ass 2.Mufflers weigh very little and it evens out weight 3.They are behind the side panels and sub frame away from damage 4.I...
1.Its looks bad ass
2.Mufflers weigh very little and it evens out weight
3.They are behind the side panels and sub frame away from damage
4.I am trying to make a bike that is innovative if you never try to be different you never will be.
Clearly Japan failed on this dual pipe innovation.



And America fixed it:



'Merica
seth505
Posts
10235
Joined
4/1/2008
Location
SD, CA, USA
10/27/2014 11:42pm
Here's how. Don't do it. IMHO
moto38
Posts
106
Joined
2/23/2014
Location
Smithfield, VA, USA
10/28/2014 12:27am


The Shop

nytsmaC
Posts
5946
Joined
8/10/2009
Location
Frig Off, CA
10/28/2014 12:37am
moto38 wrote:
[img]https://p.vitalmx.com/photos/forums/2014/10/28/68811/s1200_double_facepalm.jpg[/img]


I see what you did there.

Please do it, and post results.
Robgvx
Posts
4138
Joined
4/1/2008
Location
GB
10/28/2014 2:45am Edited Date/Time 10/28/2014 2:45am
He's right. Damn those single-sided mufflers.



motodriller
Posts
158
Joined
2/13/2009
Location
Pasco, WA, USA
10/28/2014 3:05am
Dream race bike at northwest motocross forums.
reded
Posts
3682
Joined
3/26/2011
Location
USA
10/28/2014 3:45am
This thread should be merged with THIS one.
txgoon
Posts
151
Joined
4/4/2013
Location
Denton, TX, USA
10/28/2014 4:27am
Chad Scogins just did it to his CR. I don't know how to post photos but his Instagram is chad_39. I think it blew up already too.
2 Stroke Beast
Posts
319
Joined
9/11/2014
Location
Reinholds, PA, USA
10/28/2014 5:10am


So something like this is impossible without decreasing horsepower. Also my idea on how to keep back pressure is to get someone to weld in some washers in both ends of the Silencer tubes. The washers will start of with a small hole and then I can drill it out if i need less back pressure.
IWreckALot
Posts
8677
Joined
3/12/2011
Location
Fort Worth, TX, USA
10/28/2014 5:14am
reded wrote:
Just to get you up to date on things..... Dual exhaust on a motocross bike is stupid for many reasons. 1. It's fuckin ugly. 2. It's...
Just to get you up to date on things.....

Dual exhaust on a motocross bike is stupid for many reasons.

1. It's fuckin ugly.
2. It's twice as heavy.
3. It's twice as much shit to tear up in a crash.
4. Unless your RM125 is pre 1989, the silencer should be barely visible past the side cover.
5. You'll likely end up with a bike that runs worse than it currently does.

Worry about your riding skills more and the number of pipes less, you'll thank me later.
1.Its looks bad ass 2.Mufflers weigh very little and it evens out weight 3.They are behind the side panels and sub frame away from damage 4.I...
1.Its looks bad ass
2.Mufflers weigh very little and it evens out weight
3.They are behind the side panels and sub frame away from damage
4.I am trying to make a bike that is innovative if you never try to be different you never will be.
Argument number two makes me laugh. I just imagine someone constantly falling to the right because the muffler threw the weight off.

I think the only solution to all 4 points is to actually make a triple muffler. . .
2 Stroke Beast
Posts
319
Joined
9/11/2014
Location
Reinholds, PA, USA
10/28/2014 5:20am
reded wrote:
Just to get you up to date on things..... Dual exhaust on a motocross bike is stupid for many reasons. 1. It's fuckin ugly. 2. It's...
Just to get you up to date on things.....

Dual exhaust on a motocross bike is stupid for many reasons.

1. It's fuckin ugly.
2. It's twice as heavy.
3. It's twice as much shit to tear up in a crash.
4. Unless your RM125 is pre 1989, the silencer should be barely visible past the side cover.
5. You'll likely end up with a bike that runs worse than it currently does.

Worry about your riding skills more and the number of pipes less, you'll thank me later.
1.Its looks bad ass 2.Mufflers weigh very little and it evens out weight 3.They are behind the side panels and sub frame away from damage 4.I...
1.Its looks bad ass
2.Mufflers weigh very little and it evens out weight
3.They are behind the side panels and sub frame away from damage
4.I am trying to make a bike that is innovative if you never try to be different you never will be.
IWreckALot wrote:
Argument number two makes me laugh. I just imagine someone constantly falling to the right because the muffler threw the weight off. I think the only...
Argument number two makes me laugh. I just imagine someone constantly falling to the right because the muffler threw the weight off.

I think the only solution to all 4 points is to actually make a triple muffler. . .
Then that guy that said I cant do dual mufflers is like I like you should do 3 mufflersTongue
JerseyFresh
Posts
607
Joined
9/7/2009
Location
Denver, CO, USA
10/28/2014 6:26am
Hey, Look! It's the new Ddavis! Motocross - home of the eternally clueless.
seth505
Posts
10235
Joined
4/1/2008
Location
SD, CA, USA
10/28/2014 6:44am
[img]https://p.vitalmx.com/photos/forums/2014/10/28/68816/s1200_post_380728_14107557466892.jpg[/img] So something like this is impossible without decreasing horsepower. Also my idea on how to keep back pressure is to get someone to weld in...


So something like this is impossible without decreasing horsepower. Also my idea on how to keep back pressure is to get someone to weld in some washers in both ends of the Silencer tubes. The washers will start of with a small hole and then I can drill it out if i need less back pressure.
Why even add any weight to one of the lightest bikes on the track? If you say mass centralization then you have been brainwashed by Honda and are too far gone to be helped Silly

ps- It isn't going to run as good
Grizz
Posts
3105
Joined
7/2/2012
Location
Los Angeles, CA, USA
10/28/2014 6:47am
reded wrote:
Just to get you up to date on things..... Dual exhaust on a motocross bike is stupid for many reasons. 1. It's fuckin ugly. 2. It's...
Just to get you up to date on things.....

Dual exhaust on a motocross bike is stupid for many reasons.

1. It's fuckin ugly.
2. It's twice as heavy.
3. It's twice as much shit to tear up in a crash.
4. Unless your RM125 is pre 1989, the silencer should be barely visible past the side cover.
5. You'll likely end up with a bike that runs worse than it currently does.

Worry about your riding skills more and the number of pipes less, you'll thank me later.
1.Its looks bad ass 2.Mufflers weigh very little and it evens out weight 3.They are behind the side panels and sub frame away from damage 4.I...
1.Its looks bad ass
2.Mufflers weigh very little and it evens out weight
3.They are behind the side panels and sub frame away from damage
4.I am trying to make a bike that is innovative if you never try to be different you never will be.
2 weighs 2x as much as 1.
2 Stroke Beast
Posts
319
Joined
9/11/2014
Location
Reinholds, PA, USA
10/28/2014 6:52am
I mean it not a big deal but I kind of want to do it and a couple negative comments wont slow me down. Therefore many of the top inventors were discouraged with their projects and yeah some of them failed but some did not.
seth505
Posts
10235
Joined
4/1/2008
Location
SD, CA, USA
10/28/2014 6:55am
I mean it not a big deal but I kind of want to do it and a couple negative comments wont slow me down. Therefore many...
I mean it not a big deal but I kind of want to do it and a couple negative comments wont slow me down. Therefore many of the top inventors were discouraged with their projects and yeah some of them failed but some did not.
Right on, one-off projects are fun. I'm sure it'll be cool and you'll learn some stuff through the process. Just realize that some people have been around 125s for very long and this is well known that it won't be beneficial or innovative in respect to performance.
JW381
Posts
10638
Joined
7/21/2009
Location
Harrisburg, OR, USA
10/28/2014 6:56am
reded wrote:
Just to get you up to date on things..... Dual exhaust on a motocross bike is stupid for many reasons. 1. It's fuckin ugly. 2. It's...
Just to get you up to date on things.....

Dual exhaust on a motocross bike is stupid for many reasons.

1. It's fuckin ugly.
2. It's twice as heavy.
3. It's twice as much shit to tear up in a crash.
4. Unless your RM125 is pre 1989, the silencer should be barely visible past the side cover.
5. You'll likely end up with a bike that runs worse than it currently does.

Worry about your riding skills more and the number of pipes less, you'll thank me later.
1.Its looks bad ass 2.Mufflers weigh very little and it evens out weight 3.They are behind the side panels and sub frame away from damage 4.I...
1.Its looks bad ass
2.Mufflers weigh very little and it evens out weight
3.They are behind the side panels and sub frame away from damage
4.I am trying to make a bike that is innovative if you never try to be different you never will be.
Clearly Japan failed on this dual pipe innovation. [img]https://powersports.honda.com/assets/flash/model/gallery/CRF450R_2014_10.jpg[/img] And America fixed it: [img]http://cdn.motocross.transworld.net/wp-content/blogs.dir/441/files/2013/07/Screen-shot-2013-07-17-at-3.14.13-PM.png[/img] 'Merica
Clearly Japan failed on this dual pipe innovation.



And America fixed it:



'Merica
Hahaaaaaaaa
10/28/2014 7:05am
[img]https://p.vitalmx.com/photos/forums/2014/10/28/68816/s1200_post_380728_14107557466892.jpg[/img] So something like this is impossible without decreasing horsepower. Also my idea on how to keep back pressure is to get someone to weld in...


So something like this is impossible without decreasing horsepower. Also my idea on how to keep back pressure is to get someone to weld in some washers in both ends of the Silencer tubes. The washers will start of with a small hole and then I can drill it out if i need less back pressure.
The fact that you used the term "back pressure" shows that you do not have the knowledge to make it work. I see only negative in a project like this, except maybe learning something or acquiring new skills, which could be done by completing a useful project. Adding a silencer will do you no good except than to look different. Why not, then, build a custom carbon fiber silencer or something? You could use the dimensions of a proven part.
Grizz
Posts
3105
Joined
7/2/2012
Location
Los Angeles, CA, USA
10/28/2014 7:07am Edited Date/Time 10/28/2014 7:12am
How will you do it without a left side number plate that's made with room for the exhaust to sit behind it?

Edit: A quick google search didn't find any pictures from directly behind but you should know what I mean. The right side panel is bulged out so the exhaust won't get hit by the tire. So how willl you fit one on the other side? The CR125 that Scogins did was using the CRF plastics and sub-frame which allowed for dual exhaust mounting.
2 Stroke Beast
Posts
319
Joined
9/11/2014
Location
Reinholds, PA, USA
10/28/2014 7:09am
Maybe heat up and bend it in reality not the biggest concern right now.
2 Stroke Beast
Posts
319
Joined
9/11/2014
Location
Reinholds, PA, USA
10/28/2014 7:10am
Grizz wrote:
How will you do it without a left side number plate that's made with room for the exhaust to sit behind it? Edit: A quick google...
How will you do it without a left side number plate that's made with room for the exhaust to sit behind it?

Edit: A quick google search didn't find any pictures from directly behind but you should know what I mean. The right side panel is bulged out so the exhaust won't get hit by the tire. So how willl you fit one on the other side? The CR125 that Scogins did was using the CRF plastics and sub-frame which allowed for dual exhaust mounting.
grizz you have 1999 post this calls for a celebration Tongue
nytsmaC
Posts
5946
Joined
8/10/2009
Location
Frig Off, CA
10/28/2014 7:12am Edited Date/Time 10/28/2014 7:13am
Grizz wrote:
How will you do it without a left side number plate that's made with room for the exhaust to sit behind it? Edit: A quick google...
How will you do it without a left side number plate that's made with room for the exhaust to sit behind it?

Edit: A quick google search didn't find any pictures from directly behind but you should know what I mean. The right side panel is bulged out so the exhaust won't get hit by the tire. So how willl you fit one on the other side? The CR125 that Scogins did was using the CRF plastics and sub-frame which allowed for dual exhaust mounting.
That's easy, just remove it bro! How are you going to see the sikk dual exhaust with those gay side panels blocking them?
Grizz
Posts
3105
Joined
7/2/2012
Location
Los Angeles, CA, USA
10/28/2014 7:15am
If you wanna do something new on a moto bike, why not make it come right out the center!? Talk about mass centralization!



Geez I didn't even realize I had that many posts Blush No celebration needed lol
2 Stroke Beast
Posts
319
Joined
9/11/2014
Location
Reinholds, PA, USA
10/28/2014 7:18am
Grizz wrote:
If you wanna do something new on a moto bike, why not make it come right out the center!? Talk about mass centralization! [img]http://images.motorcycle-usa.com/PhotoGallerys/07_CBR600RR_Det_17.jpg[/img] Geez I...
If you wanna do something new on a moto bike, why not make it come right out the center!? Talk about mass centralization!



Geez I didn't even realize I had that many posts Blush No celebration needed lol
Because when you do jumps the tire would come right up and hit it 2000 post
nytsmaC
Posts
5946
Joined
8/10/2009
Location
Frig Off, CA
10/28/2014 7:21am
Grizz wrote:
If you wanna do something new on a moto bike, why not make it come right out the center!? Talk about mass centralization! [img]http://images.motorcycle-usa.com/PhotoGallerys/07_CBR600RR_Det_17.jpg[/img] Geez I...
If you wanna do something new on a moto bike, why not make it come right out the center!? Talk about mass centralization!



Geez I didn't even realize I had that many posts Blush No celebration needed lol
Because when you do jumps the tire would come right up and hit it 2000 post
Loop your bike out a few times to gain some extra subframe clearance. The third exhaust goes in the middle like that one, and you won't need a rear fender anymore.
1
2 Stroke Beast
Posts
319
Joined
9/11/2014
Location
Reinholds, PA, USA
10/28/2014 7:24am
Grizz wrote:
If you wanna do something new on a moto bike, why not make it come right out the center!? Talk about mass centralization! [img]http://images.motorcycle-usa.com/PhotoGallerys/07_CBR600RR_Det_17.jpg[/img] Geez I...
If you wanna do something new on a moto bike, why not make it come right out the center!? Talk about mass centralization!



Geez I didn't even realize I had that many posts Blush No celebration needed lol
Because when you do jumps the tire would come right up and hit it 2000 post
nytsmaC wrote:
Loop your bike out a few times to gain some extra subframe clearance. The third exhaust goes in the middle like that one, and you won't...
Loop your bike out a few times to gain some extra subframe clearance. The third exhaust goes in the middle like that one, and you won't need a rear fender anymore.
Maybe Ill look into that better yet why get hurt crashing when I have a hammer.Wink
pecu_83
Posts
347
Joined
10/27/2010
Location
Parola, FI
10/28/2014 7:29am
Hmmm.. I usually like everyone and everything that are willing to do something different. I think twin silencers would be cool on a CR just because Honda has them on bigger bikes. If you are actually seeking less noise you would have to use quieter silencers. If you use 2 originals, youll have a louder bike with twice the weight (of the silencers).

I myself have been tinkering with the idea of using 2 silencers to get the bike as silent as possible to be able to ride in the woods without complaints. E-bikes are not yet in my price range Smile



This would also aim the sound towards the ground instead of up in the air. Of course there would be power loss and the jetting would have to be corrected but those are not an issue for me.

Post a reply to: Dual Mufflers on a 2 stroke

The Latest